
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly

PCB for Cloak XT
Cloak xt is an open-source printed circuit board by dnlnm, from the dnlnm/cloak-xt-stm32 repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 289.7 × 98 mm with 197 parts on 124 nets, routed with 812 tracks and 114 vias.
It is built around the STM32F072CBT6. Its parts include 79 diodes, 21 capacitors, 6 switches, 5 resistors and 3 connectors. It belongs with the STM32 boards of this library.
PCB for Cloak XT
| Qty | Value | Footprint | References |
|---|---|---|---|
| 67 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +51 |
| 60 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1u | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23, MX24 +44 |
| 18 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C5, C6, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21 +2 |
| 10 | MX_SK6812MINI-E | PCM_marbastlib-mx:LED_MX_6028R | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10 |
| 5 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.25u | MX43, MX58, MX60, MX69, MX71 |
| 3 | 2.25u | PCM_marbastlib-mx:STAB_MX_P_2.25u | S41, S44, S63 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.75u | MX30, MX56, MX68 |
| 3 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.5u | MX15, MX27, MX61 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | MX_SK6812MINI-E | PCM_marbastlib-various:LED_6028R | LED11, LED12 |
| 2 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | ROT_SKYLOONG_HS | PCM_marbastlib-various:ROT_SKYLOONG_HS-Switch | ENC1, ENC2 |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPST_TL3342 | BOOT1, RST1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 2.75u | PCM_marbastlib-mx:STAB_MX_P_2.75u | S66 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 6.25u | PCM_marbastlib-mx:STAB_MX_P_6.25u | S65 |
| 1 | 7u | PCM_marbastlib-mx:STAB_MX_P_7u | S64 |
| 1 | Conn_01x02 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J3 |
| 1 | JST | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.75u_STP_1.25 | MX29 |
| 1 | STM32F072CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | XC6206PxxxMR-Regulator_Linear | Package_TO_SOT_SMD:SOT-23 | U3 |

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly

dojoe/Twonkie
A USB-PD sniffer/injector/sink based on Google's Twinkie, re-designed to be manufactured by mere mortals.

conol-ai/openmicrokbd
Open-source recreation of OpenAI's Codex Micro macropad — PCB written in CoHDL, an AI-native hardware description language. Rust firmware (embassy) + companion app (makepad). MIT licensed. https://openmicrokbd.org


sporkus/le_capybara_keyboard
Capactive sensing (EC) pcb for Le Chiffre keyboard

sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072


It measures 289.7 × 98 mm and has 2 copper layers, 1.2 mm thick.
197 parts, built around the STM32F072CBT6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dnlnm/cloak-xt-stm32 repository on GitHub, at the commit this page was made from: the board is cloak-xt.kicad_pcb and its schematic cloak-xt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).