

Retrovga
KiCAD smd version of famous RetroVGA device
- Size
- 41.9 × 48.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 25
- Pads
- 103
- Tracks, vias
- 342, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 17 Jan 2017
- Updated
- 19 Feb 2017
Overview
Retrovga is an open-source printed circuit board by dmkfasi, from the dmkfasi/retrovga repository on GitHub. It is a 2-layer board of 41.9 × 48.3 mm with 17 parts on 25 nets, routed with 342 tracks and 14 vias.
It is built around the 74LS125DC, 74HC74D and BAT54C. Its parts include 5 resistors, 4 switches, 2 ICs, 2 diodes and 2 connectors.
Main components
374LS125DC
-0℃~+70℃ 1 10ns@5.5V,50pF 15mA 18mA 24mA 4 4.5V~5.5V 74LS Power-off isolation、Output enable Tri-State Unidirectional - Buffers, Drivers, Receivers, TransceiversTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74HC74D
SOIC-14-40℃~+125℃ 1 15ns 2 2V~6V 3.5pF 37ns@6V,50pF 3ns、3ns、3ns 40uA 5.2mA 5.2mA 74HC Series 82MHz Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSNexperiaFlip FlopsBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100K | Resistors_SMD:R_0805 | R1, R2 |
| 2 | BAT54C | TO_SOT_Packages_SMD:SOT-23_Handsoldering | D1, D2 |
| 1 | 74HC74 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U2 |
| 1 | 74LS125 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U1 |
| 1 | B | components:trimmer_piher_pt6xv | R5 |
| 1 | EVEN/ODD | RetroVGA:switch-ss12f23 | SW2 |
| 1 | G | components:trimmer_piher_pt6xv | R4 |
| 1 | ON/OFF | RetroVGA:switch-ss12f23 | SW1 |
| 1 | R | components:trimmer_piher_pt6xv | R3 |
| 1 | VGA INPUT | components:ds1038-15f | J1 |
| 1 | VGA OUTPUT | components:ds1038-15f | J2 |
| 1 | VSYNC | RetroVGA:switch-ss12f23 | SW4 |
| 1 | WIDTH | RetroVGA:switch-ss12f23 | SW3 |
The 15 most common of 17 parts.
Similar boards
- 2 layers155.1 × 156 mm

- 2 layers206.2 × 99.6 mm

Valhalla MOD XVR 4IO
csdexter/valhalla
Version-controlled material related to the Valhalla project
134 partsGPL-3.0 - 2 layers101.6 × 61 mm

Bus Extension
SmittyHalibut/RC2014-Bliken-Lights
A Blinken Lights front panel for the RC2014.
102 partsCC0-1.0 - 2 layers

VideoBoard
Cptscorcher/Excallibur-64
A reimagining of the seminal Excalibur 64 Computer
126 partsGPL-3.0 - 2 layers100 × 100 mm

RAMROM 128k board
roberto314/Unicomp2
A modular 8-bit Computer able to recreate (nearly) every Retro computer of the late 70s to mid 80s.
46 parts1 - 2 layers231.1 × 106.7 mm

- 2 layers98 × 38 mm

Bldc control ver3
pekkaroi/bldc-drive
Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller
68 parts199GPL-2.0 - 2 layers40 × 100 mm

Back pcb
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
118 parts148GPL-3.0
Questions
How big is the Retrovga PCB?
It measures 41.9 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Retrovga use?
17 parts, built around the 74LS125DC, 74HC74D and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Retrovga KiCad files?
From the dmkfasi/retrovga repository on GitHub, at the commit this page was made from: the board is RetroVGA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Retrovga design in my own project?
Its repository states no licence, so its author keeps all rights: ask dmkfasi before reusing the design.