
Pots
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

Расширительная плата гальванической развязки дискретных каналов ввода/вывода, для модулей ввода/вывода DATAFORTH SCMD PB16SM, предназначена для платы Arduino mega 2560 которая управляет хонинговальным станком ЗГ833 в проекте https://github.com/Dmitry-Chernikov/3g833.git (ветка PlatformIO)
SCMD PB16SM is an open-source printed circuit board by Dmitry-Chernikov, from the Dmitry-Chernikov/Board-SCMD-PB16SM-DATAFORTH repository on GitHub. It is a 2-layer board of 200 × 101 mm with 93 parts on 78 nets, routed with 276 tracks and 9 vias.
Its parts include 15 diodes, 13 resistors, 13 fuses and 2 switches.
Board SCMD-PB16SM DATAFORTH modules MIDC5/MODC5
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | KF141R-2.54-02P-14 | TerminalBlock_Series_KF141R:KF141R-2.54-02P-14 (DG141R-2.54-02P-14) | in/out1, in/out2, in/out3, in/out4, in/out5, in/out6, in/out7, in/out8, in/out9, in/out10, in/out11, in/out12, S3, S4 |
| 13 | 3.3R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, RPL1 |
| 13 | LED | LED_THT:LED_D3.0mm_Clear | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13 |
| 13 | Polyfuse | Fuse:Fuse_BelFuse_0ZRE0016FF_L9.9mm_W3.8mm | F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13 |
| 12 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | DL1, DL2, DL3, DL4, DL5, DL6, DL7, DL8, DL9, DL10, DL11, DL12 |
| 12 | PCIN Init | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12 |
| 12 | SCMD | Dataforth Modules:SCMD-Module-DIM | M1, M2, M3, M4, M5, M6, M7, M8, M9, M10, M11, M12 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D14 |
| 1 | 1N62xxA | Diode_THT:D_DO-201AE_P15.24mm_Horizontal | D15 |
| 1 | KF141R-2.54-12P-14 | TerminalBlock_Series_KF141R:KF141R-2.54-12P-14 (DG141R-2.54-12P-14) | S2 |
| 1 | Logic Supply | TerminalBlock_Series_KF141R:KF141R-2.54-02P-14 (DG141R-2.54-02P-14) | S1 |

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware


voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.



Musab-Hassan/aurora_keyboard
A gorgeous split wireless ortholinear keyboard that you can build yourself.

profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
It measures 200 × 101 mm and has 2 copper layers, 1.6 mm thick.
93 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Dmitry-Chernikov/Board-SCMD-PB16SM-DATAFORTH repository on GitHub, at the commit this page was made from: the board is SCMD-PB16SM/SCMD-PB16SM.kicad_pcb and its schematic SCMD-PB16SM/SCMD-PB16SM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Dmitry-Chernikov before reusing the design.