2 layers127 × 114.3 mm
2 layers31.1 × 27.9 mm
Sd breakout
dkonigsberg/sd-breakout1microSD Breakout Board
- Size
- 31.1 × 27.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 16
- Pads
- 52
- Tracks, vias
- 72, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 Jun 2018
- Updated
- 1 Jan 2022
Overview
Sd breakout is an open-source printed circuit board by dkonigsberg, from the dkonigsberg/sd-breakout repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 31.1 × 27.9 mm with 7 parts on 16 nets, routed with 72 tracks and 9 vias.
It is built around the ECLAMP2410P.TCT. Its parts include 2 connectors, 1 capacitor, 1 resistor and 1 IC. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
Main components
1README
README.mdmicroSD Breakout Board
This repository contains the KiCad project with the complete circuit schematics and PCB layout for a microSD card breakout board. This board includes all the necessary pull-up resistors and protection diodes for the full SD interface, courtesy of the EClamp2410P component.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | EClamp2410P | lib_fp:SLP4016P16_1.6x4mm_P0.5mm | U1 |
| 1 | Header | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | LOGO | lib_fp:LogicProbe | G*** |
| 1 | OSHW-logo_10mm | lib_fp:OSHW-logo_10mm | G*** |
| 1 | microSD Socket | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J2 |
Questions
How big is the Sd breakout PCB?
It measures 31.1 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sd breakout use?
7 parts, built around the ECLAMP2410P.TCT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sd breakout KiCad files?
From the dkonigsberg/sd-breakout repository on GitHub, at the commit this page was made from: the board is sd-breakout.kicad_pcb and its schematic sd-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sd breakout design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers63.5 × 38.5 mm
Controller
M0WUT/Rack-Test-Equipment
M0WUT designed test equipment for mounting in standard 19" rack enclosures
22 parts - 2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT - 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k