
Snes adapter
dkidd928/cartreader
A shield for the Arduino Mega that can back up video game cartridges.

A shield for the Arduino Mega that can back up video game cartridges.
Main pcb is an open-source printed circuit board by dkidd928, from the dkidd928/cartreader repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 27 parts on 94 nets, routed with 931 tracks and 80 vias.

This project represents a community-driven effort to provide an easy to build and easy to modify cartridge dumper.
Happy making. 🔧🔨😊
For any questions or issues please also visit the accompanying thread in the Arduino Forum.
And be sure to check the guides in the Wiki too.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Screw_Terminal_01x01 | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | M2_1, M2_2, M2_3, M2_4, M2_5, M2_6, M2_7, M2_8, M2_9, M2_10 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11, J12, J14, J15 |
| 2 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7, J9 |
| 2 | 5V USB | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6, J16 |
| 1 | CART SLOT BOTTOM ROW | Connector_PinSocket_2.54mm:PinSocket_1x36_P2.54mm_Vertical | J4 |
| 1 | CART SLOT TOP ROW | Connector_PinSocket_2.54mm:PinSocket_1x38_P2.54mm_Vertical | J3 |
| 1 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J17 |
| 1 | EXP1 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J13 |
| 1 | EXP2 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J8 |
| 1 | MEGA BOTTOM | Connector_PinSocket_2.54mm:PinSocket_2x16_P2.54mm_Vertical | J2 |
| 1 | MEGA SIDE | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J5 |
| 1 | MEGA TOP | Connector_PinSocket_2.54mm:PinSocket_2x21_P2.54mm_Vertical | J1 |
| 1 | N/A | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10 |
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dkidd928/cartreader repository on GitHub, at the commit this page was made from: the board is hardware/main_pcb/main_pcb.kicad_pcb and its schematic hardware/famicom_adapter/famicom_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

dkidd928/cartreader
A shield for the Arduino Mega that can back up video game cartridges.

dkidd928/cartreader
A shield for the Arduino Mega that can back up video game cartridges.

dkidd928/cartreader
A shield for the Arduino Mega that can back up video game cartridges.

dkidd928/cartreader
A shield for the Arduino Mega that can back up video game cartridges.

dkidd928/cartreader
A shield for the Arduino Mega that can back up video game cartridges.

dkidd928/cartreader
A shield for the Arduino Mega that can back up video game cartridges.

dkidd928/cartreader
A shield for the Arduino Mega that can back up video game cartridges.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.