
Bluetooth
djimenezjerez/control_accesos_hardware
Hardware para el sistema de control de accesos mediante sensor de huellas dactilares

Hardware para el sistema de control de accesos mediante sensor de huellas dactilares
Pcb inferior is an open-source printed circuit board by djimenezjerez, from the djimenezjerez/control_accesos_hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 62 × 93.2 mm with 77 parts on 80 nets, routed with 919 tracks and 112 vias.
It is built around the ATMEGA328P-AU, AP1117DG and ENC28J60-I/SO. Its parts include 28 resistors, 18 capacitors, 9 diodes, 8 ICs and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Para abrir los archivos necesita tener instalado el software KiCad, con lo que podrá ejecutar los archivos .pro (Project) dentro de los cuales se encuentra el esquemático de la placa de interfaz sensorial que también cumple la función de control central de puertas, y la placa de respaldo bluetooth para apertura de puertas en caso de emergencia.
Para continuar el desarrollo de la aplicación de Android es necesario importar el archivo del proyecto MIT App Inventor 2 y generar el APK desde la propia aplicación.
Los componentes del sistema son:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | R | Resistors_SMD:R_0805_HandSoldering | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +12 |
| 10 | C | Capacitors_SMD:C_0805_HandSoldering | C5, C7, C8, C9, C11, C12, C15, C16, C17, C19 |
| 3 | CP | Capacitors_Tantalum_SMD:TantalC_SizeB_EIA-3528_HandSoldering | C10, C13, C14 |
| 3 | LED | LEDs:LED_0805 | D6, D7, D8 |
| 2 | AP1117 | TO_SOT_Packages_SMD:SOT-223 | U5, U6 |
| 2 | CP | Capacitors_Tantalum_SMD:TantalC_SizeC_EIA-6032_Reflow | C3, C4 |
| 2 | Diode_Bridge | w_smd_diode:MBS | D1, D2 |
| 1 | ATMEGA328P-A | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC2 |
| 1 | C | Capacitors_Tantalum_SMD:TantalC_SizeB_EIA-3528_HandSoldering | C6 |
| 1 | CONN_01X02 | Connect:AK300-2 | P4 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P1 |
| 1 | CONN_01X06 | Socket_Strips:Socket_Strip_Straight_1x06 | P2 |
| 1 | CONN_02X03 | Socket_Strips:Socket_Strip_Straight_2x03 | P3 |
| 1 | CP1 | Capacitors_Tantalum_SMD:TantalC_SizeC_EIA-6032_Reflow | C18 |
| 1 | CP1_Small | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | Crystal | Crystals:Q_49U3HMS | Y1 |
| 1 | Crystal_Small | Crystals:Crystal_SMD_2520_4Pads | Y2 |
| 1 | D | Diodes_SMD:SOD-123 | D4 |
| 1 | D_Schottky | SMD_Packages:powermite3 | D5 |
| 1 | ENC28J60-I/SO | w_smd_dil:soic-28 | IC1 |
| 1 | EP10 | w_smd_inductors:transf_smd_ep10-8 | U3 |
| 1 | INDUCTOR | Resistors_ThroughHole:Resistor_Vertical_RM5mm | L2 |
| 1 | LTC4067 | w_smd_dil:tssop-16 | U1 |
| 1 | L_Small | Resistors_ThroughHole:Resistor_Vertical_RM5mm | L1 |
| 1 | MOSFET_2512 | TO_SOT_Packages_SMD:TSOT-6-MK06A_Handsoldering | Q1 |
| 1 | MagJack_SI_52003 | mgmt_1:MG_SI_52003 | U4 |
| 1 | OPTOTRANS | w_smd_dil:mfp_4 | U2 |
| 1 | SHUNT_REGULATOR | TO_SOT_Packages_SMD:SOT-23 | T1 |
| 1 | ZENER | w_smd_diode:do214ac | D3 |
| 1 | ZENER | Diodes_ThroughHole:Diode_DO-41_SOD81_Vertical_AnodeUp | D9 |
The 73 most common of 77 parts.

djimenezjerez/control_accesos_hardware
Hardware para el sistema de control de accesos mediante sensor de huellas dactilares

akaStanley/TalDoor
GatekeeperV2- POE powered NFC Door lock system using the PocketBeagle





tomaskovacik/vwcdpic
This is my personal fork of k9spud vwcdpic project

mulcmu/esphome-usb-grow-lights
Custom PCB and esphome configuration for usb powered grow lights.

It measures 62 × 93.2 mm and has 2 copper layers, 1.6 mm thick.
77 parts, built around the ATMEGA328P-AU, AP1117DG and ENC28J60-I/SO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the djimenezjerez/control_accesos_hardware repository on GitHub, at the commit this page was made from: the board is biometrico_poe/pcb_inferior.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).