Skip to the content
4 layers59.9 × 61.5 mmSuckydo, the printed circuit board in 3D
Size
59.9 × 61.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
80
Nets
71
Pads
272
Tracks, vias
368, 216
Pours
19
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
10 Jan 2025
Updated
17 Jan 2025

Overview

Suckydo is an open-source printed circuit board by discreetmayor, from the discreetmayor/smt_pickup repository on GitHub. It is a 4-layer board of 59.9 × 61.5 mm with 80 parts on 71 nets, routed with 368 tracks and 216 vias.

It is built around the ESP32-C6-MINI-1-H4, TPS561201DDCR and TPS62135RGXR, with the AP33771CFBZ-13-FA01, TS391SN2T1G and MMBT2222A among its other parts. Its parts include 35 resistors, 19 capacitors, 5 diodes, 5 transistors and 4 ICs. It belongs with the ESP32 and RISC-V boards of this library.

Main components

11

Parts

80
QtyValueFootprintReferences
9100nCapacitor_SMD:C_0805_2012MetricC2, C4, C8, C9, C11, C13, C15, C16, C18
710kResistor_SMD:R_0805_2012MetricR2, R3, R9, R10, R23, R24, R31
510KResistor_SMD:R_0805_2012MetricR5, R6, R29, R34, R35
410uResistor_SMD:R_1210_3225MetricC10, C12, C14, C17
3100Resistor_SMD:R_0805_2012MetricR1, R20, R25
347kResistor_SMD:R_0805_2012MetricR17, R32, R33
3PJA3404APackage_TO_SOT_SMD:SOT-23Q1, Q3, Q6
20Resistor_SMD:R_0805_2012MetricR11, R12
2100kResistor_SMD:R_0805_2012MetricR26, R27
21kResistor_SMD:R_0805_2012MetricR4, R22
21uCapacitor_SMD:C_0805_2012MetricC1, C7
2330pCapacitor_SMD:C_0805_2012MetricC5, C6
25.1kResistor_SMD:R_0805_2012MetricR7, R8
2MMBT2222APackage_TO_SOT_SMD:SOT-23Q2, Q5
2SMF4L20ADiode_SMD:D_SOD-123FD2, D4
2SS210Diode_SMD:D_SMAD1, D5
11.62MResistor_SMD:R_0805_2012MetricR28
110Resistor_SMD:R_0805_2012MetricR21
1100KResistor_SMD:R_0805_2012MetricR15
110uCapacitor_SMD:C_0805_2012MetricC3
11uInductor_SMD:XAL40XXL1
1200KResistor_SMD:R_0805_2012MetricR16
123.2KResistor_SMD:R_0805_2012MetricR18
13.3uInductor_SMD:L_1008_2520MetricL2
133.2KResistor_SMD:R_0805_2012MetricR30
139KResistor_SMD:R_0805_2012MetricR14
147uCapacitor_SMD:C_1206_3216MetricC19
152KResistor_SMD:R_0805_2012MetricR13
15mResistor_SMD:R_0805_2012MetricR19
1AP33771CFBZ-13-FA01Package_DFN_QFN:AP33771CFBZ13FA01IC1
1ESP32-C6-MINI-1-H4CUSTOM:ESP32-C6_EXPU1
1HFW14R-1STE1H1LFConnector_FFC-FPC:HFW14R1STE1H1LFJ1
1PedalTerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_HorizontalPedal1
1PumpTerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_HorizontalPump1
1SZNUP2105LT1GPackage_TO_SOT_SMD:SOT-23D3
1TPS561201DDCRPackage_TO_SOT_SMD:SOT95P280X110-6NIC3
1TPS62135RGXRPackage_DFN_QFN:TPS621361RGXTPS1
1TS391SN2T1GPackage_TO_SOT_SMD:SOT95P275X110-5NIC2
1USB4105-GF-AConnector_USB:USB4105_GCTJ2
1ValveTerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_HorizontalValve1

The 76 most common of 80 parts.

Similar boards

  • 2 layers47 × 55.5 mmMotor master, the printed circuit board in 3D

    Motor master

    PaulBailey-1/motor-master

    The board can also be connected to motors through the CAN bus. Connect one end of the CAN chain to the CAN connector on the board and the other end to the TERM connector, or use another termination resistor.

    52 parts1
  • 4 layers32 × 26 mmSource12-rotating, the printed circuit board in 3D

    Source12-rotating

    juicebox6030/Nova-Link

    NOVA-LINK is an open, low-latency wireless communication protocol and firmware stack designed for use in real-time live event environments.

    45 partsGPL-3.0
  • 4 layers100 × 82.6 mmHV ECU, the printed circuit board in 3D

    HV ECU

    outlandnish/subaru-brz-hv-ecu

    HV Power Management ECU for my Subaru BRZ EV Conversion

    125 partsMIT
  • 2 layers120 × 97 mmSpinnyKittyCommittee, the printed circuit board in 3D

    SpinnyKittyCommittee

    winsonlin8/SpinnyKittyCommittee

    A rhythm-synchronized speaker system featuring a 3D-printed cat that spins and flashes RGB LEDs in time with music — inspired by this video.

    90 partsMIT
  • 2 layers55 × 55 mmGuitarray power, the printed circuit board in 3D

    Guitarray power

    IIP-Group/polymap

    Repository for the PolyMap Hardware and PolyMap Studio VST Plugin (prototype version).

    58 parts4CERN-OHL-P-2.0
  • 4 layers50 × 50 mmPDB Board 0.1, the printed circuit board in 3D

    PDB Board 0.1

    thejamesrhodes/Hyades-Flight-Computer

    Full Hardware and Electronics design, Bare-metal GNC flight software for an actively attitude-controlled high-power rocket

    52 parts1Apache-2.0
  • 2 layers135.1 × 159.4 mmBMS Master, the printed circuit board in 3D

    BMS Master

    UCDFS/Circuits

    KiCad projects and PCB designs for UCDFS electronic circuits.

    220 parts1
  • 2 layers20 × 22.5 mm9V Buck PS For FET Dimmer, the printed circuit board in 3D

    9V Buck PS For FET Dimmer

    jakeson21/LM3409HV-30W-LED

    30W LED driver based on a TI LM3409HV buck controller

    35 partsGPL-3.0

Questions

How big is the Suckydo PCB?

It measures 59.9 × 61.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Suckydo use?

80 parts, built around the ESP32-C6-MINI-1-H4, TPS561201DDCR, TPS62135RGXR and AP33771CFBZ-13-FA01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Suckydo KiCad files?

From the discreetmayor/smt_pickup repository on GitHub, at the commit this page was made from: the board is suckydo.kicad_pcb and its schematic suckydo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Suckydo design in my own project?

Its repository states no licence, so its author keeps all rights: ask discreetmayor before reusing the design.