

maker of music
- Size
- 109.9 × 115.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 35
- Pads
- 101
- Tracks, vias
- 262, 60
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Oct 2026
- Updated
- 26 Oct 2026
Overview
Music is an open-source printed circuit board by dipa-cotton, from the dipa-cotton/music_maker repository on GitHub. It is a 2-layer board of 109.9 × 115.8 mm with 18 parts on 35 nets, routed with 262 tracks and 60 vias.
It is built around the SJ1-3535NG. Its parts include 7 connectors, 4 switches, 3 resistors, 1 capacitor and 1 IC. It belongs with the nRF52 and nRF5x boards of this library.
Main components
1README
README.mdMusic Maker
this is my music maker! it's a 3 part midi keyboard/synth that has a LOT of thought put into it. It's able to connect using magnetic pogo connectors, has 2 outputs, communicates via xiao nrf5820, and has so so so many switches, sliders, and rotary encoders!
these 2 parts connect together to form an octave, yay!
this is the synth that connects to the edge of the board.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3 |
| 2 | Conn_01x01_Pin | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | J3, J7 |
| 2 | Conn_01x03_Socket | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J4 |
| 2 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_PTA1543_Single_Slide | RV1, RV2 |
| 2 | SJ1-3535NG | jack:CUI_SJ1-3535NG | J5, J6 |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW2, SW3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | C | Capacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1 |
| 1 | Conn_01x07_Pin | jack:keys | J1 |
| 1 | RotaryEncoder_Switch_MP | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SW_DIP_x04 | Package_DIP:DIP-8_W10.16mm | SW5 |
| 1 | XIAO-nRF52840-Plus-SMD | Xiao:XIAO-nRF52840-Plus-SMD | U2 |
More from dipa-cotton/music_maker
1- 2 layers81.4 × 115.8 mm

Similar boards
- 4 layers157.5 × 98 mm

BeamBender BigBox
kavanoz64/BeamBender-BigBox
An AGA digital scandoubler and HDMI output card for the Amiga 4000, with Amiga 2000 / 3000 support.
221 parts12 - 2 layers50 × 50 mm

- 4 layers96.9 × 88.1 mm

Digichiver
frindaddy/digichiver
Archival hardware/firmware for the MM54104 Digitalker chip
121 partsMIT - 2 layers81 × 40.5 mm

- 2 layers103.7 × 74.1 mm

PicoGUS
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
53 parts805 - 2 layers53.3 × 76.2 mm

PAS16DB
demik/oldworld
Development ressources for Old World Macintosh (68k and NuBus PPC) and a few related things…
58 parts27CERN-OHL-P-2.0 - 2 layers99.1 × 99.1 mm

H7RTX V2
alberto-grl/H7RTX-V2-Schematics-PCB
Schematics and PCB for a three-band direct sampling SDR. Using the internal ADC of an MCU, TX power is about 5 W. USB powered. Firmware code: https://github.com/alberto-grl/750RTX
127 parts - 2 layers27.9 × 16.5 mm

Questions
How big is the Music PCB?
It measures 109.9 × 115.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Music use?
18 parts, built around the SJ1-3535NG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Music KiCad files?
From the dipa-cotton/music_maker repository on GitHub, at the commit this page was made from: the board is 7 key section/music.kicad_pcb and its schematic 5 key section/music.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Music design in my own project?
Its repository states no licence, so its author keeps all rights: ask dipa-cotton before reusing the design.