2 layers99.1 × 76.2 mm
2 layers64 × 56 mm
Induction heater controller
diondokter/induction-heater4- Size
- 64 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 29
- Pads
- 120
- Tracks, vias
- 291, 35
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Oct 2022
- Updated
- 13 Mar 2024
Overview
Induction heater controller is an open-source printed circuit board by diondokter, from the diondokter/induction-heater repository on GitHub. It is a 2-layer board of 64 × 56 mm with 33 parts on 29 nets, routed with 291 tracks and 35 vias.
It is built around the 150080RS75000, 54601-906WPLF and TS02-66-60-BK-160-SCR-D, with the TB007-508-02BE among its other parts. Its parts include 6 capacitors, 5 resistors, 5 connectors, 3 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
4
150080RS75000
0805-40℃~+85℃ 140° 150mcd 20mA 2V 625nm 630nm Discrete Diode Red Water Clear 0805 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)
54601-906WPLF
插件1 11.05mm 13.2mm 18mm Copper Alloy Gold Harpoon Contact (Plastic) Non-LED Non-PoE RJ45 Jack Right Angle Unshielded Plugin Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSAmphenolEthernet Connectors / Modular Connectors (RJ45 RJ11)
TS02-66-60-BK-160-SCR-D
插件-30℃~+80℃ 1.6N 12V 50mA 80,000 cycles PC Pin Round Button SPST Through Hole 插件 Tactile Switches ROHSCUITactile Switches
TB007-508-02BE
插件,P=5.08mm-40℃~+105℃ 1 12~24 16A 1x2P 2 2P 300V 5.08mm Blue 插件,P=5.08mm Screw Terminal Blocks ROHSCUIScrew Terminal Blocks
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | Connector:Banana_Jack_1Pin | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C4 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3 |
| 2 | RJ12 | Connector_RJ:RJ12_Amphenol_54601 | J2, J4 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW3 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 20 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | Conn_02x06_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J5 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | D | Diode_SMD:D_SOD-523 | D1 |
| 1 | Fan_3pin | Connector:FanPinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | NCP718xSN330 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | STM32G030F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | Screw_Terminal_01x02 | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G_1x02_P5.00mm_Vertical | J3 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | THVD1449DR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | IC1 |
More from diondokter/induction-heater
2- 2 layers112.8 × 55 mm
Similar boards
- 2 layers160 × 100 mm
- 8 layers120 × 100 mm
- 2 layers140 × 105 mm
- 2 layers79.5 × 79.5 mm
Esp32-energymeter V2
ElektorLabs/esp32-energymeter
The Elektor ESP32 Energy Meter project, featuring schematics, PCB designs, and ESPHome integration for advanced energy monitoring
116 parts48MIT - 4 layers75 × 59.2 mm
Data logger
Mutzi1211/Wasserrakete
Ein Überblick über alle Projektbestandteile – von CAD über Code bis zu Anforderungen und Abgaben.
65 parts1 - 2 layers140 × 90 mm
- 4 layers127 × 76.2 mm
Payload pcb
austindriggs/urc-payload-pcb
All-purpose control and interface board designed to manage mission-critical sensors and electronics for University Rover Challenge at WVU.
114 partsMIT - 4 layers60 × 90 mm
Questions
How big is the Induction heater controller PCB?
It measures 64 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Induction heater controller use?
33 parts, built around the 150080RS75000, 54601-906WPLF, TS02-66-60-BK-160-SCR-D and TB007-508-02BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Induction heater controller KiCad files?
From the diondokter/induction-heater repository on GitHub, at the commit this page was made from: the board is hardware/induction-heater-controller/induction-heater-controller.kicad_pcb and its schematic hardware/induction-heater-controller/induction-heater-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Induction heater controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask diondokter before reusing the design.