2 layers197 × 159 mm
2 layers100 × 90 mm
- Size
- 100 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 32
- Pads
- 150
- Tracks, vias
- 246, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 30 Dec 2024
- Updated
- 3 Sep 2026
Overview
Power is an open-source printed circuit board by dingjamesj, from the dingjamesj/electronic-trombone repository on GitHub. It is a 2-layer board of 100 × 90 mm with 54 parts on 32 nets, routed with 246 tracks and 12 vias.
It is built around the CD74HC4051E, L7805 and L7905. Its parts include 9 resistors, 8 capacitors, 8 connectors, 4 ICs and 4 diodes.
Main components
3
CD74HC4051E
PDIP-16-55℃~+125℃ 1 2V~6V 45ns 45ns 4ns 70Ω 8:1 PDIP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsL7905
TO-220TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSKTPUncategorised
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100k | Potentiometer_THT:Potentiometer_Bourns_3339P_Vertical_HandSoldering | RV25, RV26, RV27, RV28, RV29, RV30, RV31, RV32, RV33 |
| 5 | Screw_Terminal_01x03 | Header 691137710003:691137710003 | J9, J10, J11, J12, J15 |
| 5 | TestPoint_Small | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP25, TP26, TP27, TP28, TP29 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C27, C28, C29, C30 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R43, R44, R45, R46 |
| 4 | LED | LED_THT:LED_D5.0mm | D24, D25, D26, D27 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H17, H18, H19, H20 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R47, R48, R51 |
| 2 | 820 | Resistor_SMD:R_0805_2012Metric | R49, R50 |
| 2 | BC9VPC | Battery Holder BC9VPC:BC9VPC_MPD | B1, B2 |
| 2 | Screw_Terminal_01x02 | Header 691137710002:691137710002 | J13, J16 |
| 1 | 0.1u | Capacitor_Tantalum_SMD:CP_EIA-3216-12_Kemet-S | C32 |
| 1 | 0.33u | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C31 |
| 1 | 1u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C34 |
| 1 | 2.2u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C33 |
| 1 | CD74HC4051E | Package_DIP:DIP-16_W7.62mm | U8 |
| 1 | Conn_01x03 | Connector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J14 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U10 |
| 1 | L7905 | Package_TO_SOT_THT:TO-220-3_Vertical | U11 |
| 1 | SW_DPST | Library:DPST Switch RA83231100 | SW1 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm | U9 |
Questions
How big is the Power PCB?
It measures 100 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power use?
54 parts, built around the CD74HC4051E, L7805 and L7905. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power KiCad files?
From the dingjamesj/electronic-trombone repository on GitHub, at the commit this page was made from: the board is KiCad/Power/Power.kicad_pcb and its schematic KiCad/Amplifier/Amplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power design in my own project?
Its repository states no licence, so its author keeps all rights: ask dingjamesj before reusing the design.
More from dingjamesj/electronic-trombone
6- 2 layers78 × 57 mm
- 2 layers78 × 73.5 mm
- 2 layers51 × 59 mm
- 2 layers48 × 53 mm
- 2 layers19 × 69.5 mm
Similar boards
- 2 layers80 × 60 mm
Sgikbd
jtsiomb/sgikbd
PS/2 keyboard/mouse converter for old Silicon Graphics computers.
35 parts20GPL-3.0 - 2 layers140 × 75 mm
- 2 layers98 × 98 mm
VCDO
Sonosus/VCDO
A Kosmo oscillator module that uses the Electric Druid VCDO chip.
93 parts4CC-BY-SA-4.0 - 2 layers100 × 100 mm
- 2 layers100 × 100 mm
Power supply
SNURocketTeamHanaro/hanaro-daq
A simple, low-cost, crude data acquisition system for combustion test of solid rocket motor.
38 parts3GPL-3.0 - 2 layers100 × 40 mm
- 4 layers103.7 × 78.5 mm
SnarkBarker
computerguy096/snark-barker-mini
A miniaturized version of the Snark Barker
180 partsCC-BY-SA-4.0 - 2 layers210 × 104 mm
AmplifierBoard
dangrie158/AmpStation
A Class D audio amplifier in a n old Teufel Decoder Station 5 case
243 partsMIT