

Oscillator
- Size
- 78 × 73.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 35
- Pads
- 136
- Tracks, vias
- 170, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 30 Dec 2024
- Updated
- 3 Sep 2026
Overview
Oscillator is an open-source printed circuit board by dingjamesj, from the dingjamesj/electronic-trombone repository on GitHub. It is a 2-layer board of 78 × 73.5 mm with 52 parts on 35 nets, routed with 170 tracks and 7 vias.
Its parts include 10 resistors, 6 capacitors, 4 diodes, 4 transistors and 2 ICs.
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_THT:R_Radial_Power_L12.0mm_W8.0mm_P5.00mm | TH1, TH2, TH3, TH4, TH5, TH6 |
| 5 | TestPoint_Small | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP1, TP2, TP3, TP4, TP5 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R4, R5, R8 |
| 4 | 1M | Resistor_SMD:R_0805_2012Metric | R2, R3, R6, R7 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C4, C6, C7 |
| 3 | 100k | Potentiometer_THT:Potentiometer_Bourns_PTV09A-2_Single_Horizontal | RV2, RV4, RV7 |
| 3 | 100k | Potentiometer_THT:Potentiometer_Bourns_3339P_Vertical_HandSoldering | RV1, RV5, RV6 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 2 | 2.2n | Capacitor_THT:C_Rect_L18.0mm_W7.0mm_P15.00mm_FKS3_FKP3 | C1, C3 |
| 2 | 5k | Potentiometer_THT:Potentiometer_Bourns_3339P_Vertical_HandSoldering | RV3, RV8 |
| 2 | LED | LED_THT:LED_D5.0mm | D3, D4 |
| 2 | NPN | Package_TO_SOT_THT:TO-92 | Q1, Q3 |
| 2 | PNP | Package_TO_SOT_THT:TO-92 | Q2, Q4 |
| 1 | 1u | Capacitor_THT:C_Rect_L7.2mm_W4.5mm_P5.00mm | C2 |
| 1 | 40106 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Screw_Terminal_01x02 | Header 691137710002:691137710002 | J1 |
| 1 | Screw_Terminal_01x03 | Header 691137710003:691137710003 | J2 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm | U2 |
More from dingjamesj/electronic-trombone
6- 2 layers197 × 159 mm

- 2 layers78 × 57 mm

- 2 layers100 × 90 mm

- 2 layers51 × 59 mm

- 2 layers48 × 53 mm

- 2 layers19 × 69.5 mm

Similar boards
- 2 layers41.4 × 47.5 mm

U2f zero panel
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
52 parts2.4k - 2 layers136 × 130 mm

Lora nodemcu
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
52 parts1.1k - 2 layers69 × 53.8 mm

TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
52 parts530 - 2 layers52.5 × 36.6 mm

ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 2 layers105.2 × 42.4 mm

- 2 layers45 × 45 mm

AirCube
StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.
52 parts379Apache-2.0 - 2 layers160 × 99.1 mm

Ardumower mega shield V1.00
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
52 parts282 - 2 layers53 × 23 mm

Maam 011109 bias
loxodes/vna
Under development open hardware microwave vector network analyzer
52 parts205
Questions
How big is the Oscillator PCB?
It measures 78 × 73.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Oscillator use?
52 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Oscillator KiCad files?
From the dingjamesj/electronic-trombone repository on GitHub, at the commit this page was made from: the board is KiCad/Oscillator/Oscillator.kicad_pcb and its schematic KiCad/Amplifier/Amplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Oscillator design in my own project?
Its repository states no licence, so its author keeps all rights: ask dingjamesj before reusing the design.