

Electronic siren
A simple transistor based electronic siren
- Size
- 46 × 33.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 19
- Pads
- 72
- Tracks, vias
- 161, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Mar 2025
- Updated
- 14 Sep 2025
Overview
Electronic siren is an open-source printed circuit board by dilshan, from the dilshan/simple-electronic-siren repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 46 × 33.5 mm with 32 parts on 19 nets, routed with 161 tracks and 0 vias.
It is built around the BC548 and BC558. Its parts include 10 resistors, 7 capacitors, 6 transistors, 3 connectors and 2 diodes. It belongs with the audio and music boards of this library.
Main components
2README
readme.mdSimple Transistor-Based Electronic Siren

This project provides a discrete transistor implementation of a multi-tone electronic siren, offering an easy-to-build and low-cost solution that replicates alarm effects found in classic two-timer NE556 siren circuits. It serves as a practical alternative to rare UM3561 and UM3562 sound generator ICs.
The design uses only standard BC548 / BC558 transistors, resistors, and capacitors—making it easy to build with commonly available components.
A full assembly and test demonstration is available on YouTube. Full details of this project are available at blog post in here.
Features
- Three siren effects
- Adjustable sweep rate via potentiometer
- Operates from 6V - 12V DC supply
- Drives a small speaker (16Ω – 32Ω)
- All through-hole components for easy assembly
PCB
This project PCB was sponsored by PCBWay. You can order the PCB directly from PCBWay’s project sharing space.
License
This project is released under the Creative Commons Attribution 4.0 International.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | BC548 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q6 |
| 3 | BC558 | Package_TO_SOT_THT:TO-92_Inline | Q3, Q4, Q5 |
| 3 | M2 | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R10 |
| 2 | 10MFD | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4, C7 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | 2.54mm 2-Pin Header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 2 | 22K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | 6.8K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R8 |
| 1 | 0.01MFD | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C6 |
| 1 | 0.033MFD | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C1 |
| 1 | 0.047MFD | Capacitor_THT:C_Rect_L9.0mm_W3.6mm_P7.50mm_MKT | C3 |
| 1 | 0.1MFD | Capacitor_THT:C_Rect_L9.0mm_W4.2mm_P7.50mm_MKT | C5 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 150K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 2.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 2.2MFD | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 2.54mm 2x3-Pin Header | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | 33K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 500K | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV1 |
Similar boards
- 4 layers99.6 × 99.8 mm

- 2 layers239.6 × 239.9 mm

- 2 layers98 × 135 mm

- 2 layers242.5 × 102.5 mm

- 2 layers100 × 100 mm

- 2 layers100 × 70 mm

- 4 layers88.3 × 54.6 mm

1005-Flash Programmer
wilsondr9999/1005-Flash-Programmer
Flash Programmer for SST39 Flash ROMs
36 parts2AGPL-3.0 - 2 layers148 × 175 mm

Questions
How big is the Electronic siren PCB?
It measures 46 × 33.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Electronic siren use?
32 parts, built around the BC548 and BC558. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Electronic siren KiCad files?
From the dilshan/simple-electronic-siren repository on GitHub, at the commit this page was made from: the board is design/electronic-siren.kicad_pcb and its schematic design/electronic-siren.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Electronic siren design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).