Skip to the content
4 layers43.2 × 62.7 mmTRX Board, the printed circuit board in 3D

818/868 TRX-Modul Board

Size
43.2 × 62.7 mm
Copper layers
4
Thickness
1.6 mm
Parts
61
Nets
55
Pads
197
Tracks, vias
333, 45
Pours
4
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
21 Dec 2021
Updated
15 Apr 2022

Overview

TRX Board is an open-source printed circuit board by digixx, from the digixx/VHF-UHF-Modul-Board repository on GitHub, published under the MIT licence. It is a 4-layer board of 43.2 × 62.7 mm with 61 parts on 55 nets, routed with 333 tracks and 45 vias.

It is built around the LM386 and BSN20. Its parts include 20 resistors, 19 capacitors, 5 diodes, 5 connectors and 4 ICs. It belongs with the audio and music boards of this library.

Main components

2

README

README.md

VHF-UHF-Modul-Board

This board helps to use SA8x8 VHF/UHF transceiver modules in any projects. It supports an adjustable MIC-Amp and Speaker-Amp. You can choose between a classic microphone or digital output of an mikrocontroller. It is 5V friendly and has LEDs for most signals.

Parts

61
QtyValueFootprintReferences
61kResistor_SMD:R_0805_2012MetricR15, R16, R17, R18, R19, R20
5100nFCapacitor_SMD:C_0805_2012MetricC3, C9, C13, C15, C16
510uFCapacitor_SMD:C_0805_2012MetricC2, C5, C7, C12, C14
51uFCapacitor_SMD:C_0805_2012MetricC1, C6, C10, C11, C19
3100RResistor_SMD:R_0805_2012MetricR2, R3, R5
34k7Resistor_SMD:R_0805_2012MetricR6, R7, R8
3BSN20Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3
3REDLED_SMD:LED_0603_1608MetricD1, D2, D3
210kResistor_SMD:R_0805_2012MetricR1, R4
210kPotentiometer_SMD:Potentiometer_Vishay_TS53YL_VerticalRV1, RV2
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3, J4
2FerritResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderL1, L2
1#2.2kResistor_SMD:R_0805_2012MetricR14
1100kResistor_SMD:R_0805_2012MetricR12
110RResistor_SMD:R_0805_2012MetricR10
1150kResistor_SMD:R_0805_2012MetricR13
11nFCapacitor_SMD:C_0805_2012MetricC4
12.2uFCapacitor_SMD:C_0805_2012MetricC18
12k2Resistor_SMD:R_0805_2012MetricR9
13k3Resistor_SMD:R_0805_2012MetricR11
1470nFCapacitor_SMD:C_0805_2012MetricC17
147nFCapacitor_SMD:C_0805_2012MetricC8
1AP1117-33Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1BLUELED_SMD:LED_0603_1608MetricD5
1Conn_01x03Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm_NumberLabelsJ5
1Conn_02x08_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ1
1DRA818U_DW_RFModules:DRA818U3
1LFCN-160Filter:Filter_Mini-Circuits_FV1206FL1
1LM386Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1MAX9814Package_DFN_QFN:DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mmU4
1SMAConnector_Coaxial:SMA_Amphenol_132134-16_VerticalJ2
1YELLOWLED_SMD:LED_0603_1608MetricD4

Similar boards

  • 6 layers141.1 × 178.5 mmLime RFE, the printed circuit board in 3D

    Lime RFE

    myriadrf/LimeRFE

    LimeRFE hardware design

    4,413 parts28
  • 4 layers50 × 80 mmARGOS DEMO, the printed circuit board in 3D

    ARGOS DEMO

    CNES/argos-demo-board

    Demo board designed to use the ARRIBADA SMD module via USB to send ARGOS messages to the Kineis constellation.

    91 parts7CERN-OHL-S-2.0
  • 2 layers103 × 78.5 mmBreathe, the printed circuit board in 3D

    Breathe

    matoushybl/breathe

    33 parts4
  • 6 layers27 × 54.5 mmBujiCore, the printed circuit board in 3D

    BujiCore

    McflyWZX/BujiUAV2

    基于全志H5的M.2接口核心板,搭载4*DDR3、eMMC。

    209 parts3GPL-3.0
  • 2 layers62.1 × 72.2 mmCage LEDbutton pi, the printed circuit board in 3D

    Cage LEDbutton pi

    limblab/proc-kevin

    Kevin's analysis code

    32 parts2
  • 6 layers150.1 × 110.1 mmMB1939, the printed circuit board in 3D

    MB1939

    svogl/stm32n6-board

    altium project import; kicad 10

    643 parts1
  • 6 layers177.7 × 96.6 mmCentrifuge, the printed circuit board in 3D

    Centrifuge

    vgacentrifuge/pcb

    The repository for designing the PCB for the VGA-mixer in TDT4295

    399 parts1
  • 2 layers194 × 129.5 mmGateway(v2), the printed circuit board in 3D

    Gateway(v2)

    balanceTWK/WBMS

    144 parts

Questions

How big is the TRX Board PCB?

It measures 43.2 × 62.7 mm and has 4 copper layers, 1.6 mm thick.

What parts does the TRX Board use?

61 parts, built around the LM386 and BSN20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TRX Board KiCad files?

From the digixx/VHF-UHF-Modul-Board repository on GitHub, at the commit this page was made from: the board is hardware/TRX_Board.kicad_pcb and its schematic hardware/TRX_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TRX Board design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).