Skip to the content
2 layersKicad circuit design, the printed circuit board in 3D

Dual-axis solar tracking system that follows the strongest light source to improve solar panel energy output.

Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
36
Pads
96
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 10.0 (file 20260206)
Created
17 Aug 2026
Updated
30 Aug 2026

Overview

Kicad circuit design is an open-source printed circuit board by dieko45, from the dieko45/sun-tracking-solar-panel repository on GitHub, published under the MIT licence. It is a 2-layer board with 17 parts on 36 nets.

It is built around the ESP32-C6-DEVKITC-1-N8. Its parts include 12 resistors, 4 diodes and 1 IC. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

sun-tracking-solar-panel

Dual-axis solar tracking system that follows the strongest light source to improve solar panel energy output. This project consists of hardware, software and firmware.

Parts

17
QtyValueFootprintReferences
7RResistor_THT:R_Axial_Shunt_L22.2mm_W8.0mm_PS14.30mm_P25.40mmR5, R6, R7, R8, R9, R11, R12
1Bottom leftOptoDevice:R_LDR_10x8.5mm_P7.6mm_VerticalR2
1Bottom leftTerminalBlock_Altech:Altech_AK100_1x06_P5.00mmD2
1Bottom rightOptoDevice:R_LDR_10x8.5mm_P7.6mm_VerticalR3
1Bottom rightTerminalBlock_Altech:Altech_AK100_1x06_P5.00mmD4
1ESP32-C6-DevKitC-1esp32:ESP32-C6-DevKitC-1U2
1RResistor_THT:R_Axial_Shunt_L22.2mm_W9.5mm_PS14.30mm_P25.40mmR10
1Top leftTerminalBlock_Altech:Altech_AK100_1x06_P5.00mmD1
1Top leftOptoDevice:R_LDR_10x8.5mm_P7.6mm_VerticalR4
1Top rightTerminalBlock_Altech:Altech_AK100_1x06_P5.00mmD3
1Top rightOptoDevice:R_LDR_10x8.5mm_P7.6mm_VerticalR1

Similar boards

  • 2 layers63 × 58 mmOPNpool r5, the printed circuit board in 3D

    OPNpool r5

    cvonk/OPNpool

    Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.

    17 parts102
  • 2 layers140 × 80 mmIntelliThings, the printed circuit board in 3D

    IntelliThings

    embedded-purdue/IntelliThings

    From IoT to AIoT: ESP32-C6 sensor nodes, Home Assistant and an LLM agent that acts through MCP

    12 parts5
  • 2 layers174.5 × 90.4 mmVolante Maquinillo, the printed circuit board in 3D

    Volante Maquinillo

    Angelpele/F1-Steering-Wheel

    F1 Functional Steering Wheel based on the ESP32

    65 parts2
  • 2 layers62.5 × 50.2 mmController, the printed circuit board in 3D

    Controller

    kongr45gpen/led-controller-pcb

    A PCB to control LEDs (up to 5 channels) using PWM, based on an Espressif ESP32-C6 development board.

    44 parts2CERN-OHL-W-2.0
  • 2 layers51 × 70.1 mmLeels breakout, the printed circuit board in 3D

    Leels breakout

    leehambley/leels

    Lee LS (Lead Screw). Forked and simplified from kachurovskiy/nanoels, rewritten in Rust and simplified for a true ELS implementation not a quasi-CNC controller

    28 parts2
  • 2 layers125 × 78.2 mmRC ESP32 V2, the printed circuit board in 3D

    RC ESP32 V2

    Poent/RC-Snowblower

    Working on designing the impeller and auger portion of the snowblower. Switched from using a worm gear assembly to a custom ring and pinion setup using a spiral bevel gear.

    84 parts2
  • 2 layers252.9 × 55 mmSulari 170V, the printed circuit board in 3D

    Sulari 170V

    antsakur/nixie-clock

    Open-source Nixie clock project. Gerbers, BOM and firmware.

    78 parts1
  • 4 layers353 × 117 mmKEYBOARD, the printed circuit board in 3D

    KEYBOARD

    Ekam-wadhwa1/nexus.terminal

    it is a portable touchscreen device with 2 displays powered by a lattepanda iota with 16gb ram and intel n150. paired with a custom built mechanical keyboard for typing,coding,streaming and web browsing

    177 parts1GPL-3.0

Questions

What parts does the Kicad circuit design use?

17 parts, built around the ESP32-C6-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kicad circuit design KiCad files?

From the dieko45/sun-tracking-solar-panel repository on GitHub, at the commit this page was made from: the board is kicad circuit design/kicad circuit design.kicad_pcb and its schematic kicad circuit design/kicad circuit design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kicad circuit design design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).