
OPNpool r5
cvonk/OPNpool
Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.
Dual-axis solar tracking system that follows the strongest light source to improve solar panel energy output.
Kicad circuit design is an open-source printed circuit board by dieko45, from the dieko45/sun-tracking-solar-panel repository on GitHub, published under the MIT licence. It is a 2-layer board with 17 parts on 36 nets.
It is built around the ESP32-C6-DEVKITC-1-N8. Its parts include 12 resistors, 4 diodes and 1 IC. It belongs with the ESP32 and RISC-V boards of this library.
Dual-axis solar tracking system that follows the strongest light source to improve solar panel energy output. This project consists of hardware, software and firmware.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | R | Resistor_THT:R_Axial_Shunt_L22.2mm_W8.0mm_PS14.30mm_P25.40mm | R5, R6, R7, R8, R9, R11, R12 |
| 1 | Bottom left | OptoDevice:R_LDR_10x8.5mm_P7.6mm_Vertical | R2 |
| 1 | Bottom left | TerminalBlock_Altech:Altech_AK100_1x06_P5.00mm | D2 |
| 1 | Bottom right | OptoDevice:R_LDR_10x8.5mm_P7.6mm_Vertical | R3 |
| 1 | Bottom right | TerminalBlock_Altech:Altech_AK100_1x06_P5.00mm | D4 |
| 1 | ESP32-C6-DevKitC-1 | esp32:ESP32-C6-DevKitC-1 | U2 |
| 1 | R | Resistor_THT:R_Axial_Shunt_L22.2mm_W9.5mm_PS14.30mm_P25.40mm | R10 |
| 1 | Top left | TerminalBlock_Altech:Altech_AK100_1x06_P5.00mm | D1 |
| 1 | Top left | OptoDevice:R_LDR_10x8.5mm_P7.6mm_Vertical | R4 |
| 1 | Top right | TerminalBlock_Altech:Altech_AK100_1x06_P5.00mm | D3 |
| 1 | Top right | OptoDevice:R_LDR_10x8.5mm_P7.6mm_Vertical | R1 |

cvonk/OPNpool
Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.

embedded-purdue/IntelliThings
From IoT to AIoT: ESP32-C6 sensor nodes, Home Assistant and an LLM agent that acts through MCP

Angelpele/F1-Steering-Wheel
F1 Functional Steering Wheel based on the ESP32

kongr45gpen/led-controller-pcb
A PCB to control LEDs (up to 5 channels) using PWM, based on an Espressif ESP32-C6 development board.

leehambley/leels
Lee LS (Lead Screw). Forked and simplified from kachurovskiy/nanoels, rewritten in Rust and simplified for a true ELS implementation not a quasi-CNC controller

Poent/RC-Snowblower
Working on designing the impeller and auger portion of the snowblower. Switched from using a worm gear assembly to a custom ring and pinion setup using a spiral bevel gear.


Ekam-wadhwa1/nexus.terminal
it is a portable touchscreen device with 2 displays powered by a lattepanda iota with 16gb ram and intel n150. paired with a custom built mechanical keyboard for typing,coding,streaming and web browsing
17 parts, built around the ESP32-C6-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dieko45/sun-tracking-solar-panel repository on GitHub, at the commit this page was made from: the board is kicad circuit design/kicad circuit design.kicad_pcb and its schematic kicad circuit design/kicad circuit design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).