
Quetzalcoatl
DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

This repository contains some of the designs I've made. Everything here is Open Source Hardware
DAC Wing is an open-source printed circuit board by DiegoRosales, from the DiegoRosales/PCB_Designs repository on GitHub. It is a 2-layer board of 20.8 × 27.7 mm with 12 parts on 10 nets, routed with 68 tracks and 3 vias.
Its parts include 4 capacitors, 4 resistors and 1 connector. It belongs with the audio and music boards of this library.
This is a simple LM317 variable power supply with an extra circuit that creates a split supply to power opamps and stuff. It's theoretically capable of sourcing like 1 amp, but I haven't tested that yet. To generate the split supply I used a voltage divider and an Op Amp from Linear Technologies called LT1206 as a buffer. Here is the link of the article that explains how to generate split supplies with a Virtual Ground. Virtual Ground Circuits


| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1.5nF | SM1206 | C3, C4 |
| 2 | 100k | SM1206 | R2, R4 |
| 2 | 560R | SM1206 | R1, R3 |
| 1 | 0.1uF | SM1206 | C1 |
| 1 | 4.7uF | SM1206POL | C2 |
| 1 | JACK_ST_1SW | Jack_stereo_1 | J1 |
| 1 | MAX5556 | SO8E | DAC1 |
| 1 | OSHW_SK_B_1 | OSHW_SK_B_1 | G*** |
| 1 | PAPILIO_WING | Papilio_Wing | PAP1 |

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 20.8 × 27.7 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DiegoRosales/PCB_Designs repository on GitHub, at the commit this page was made from: the board is DAC Wing/DAC Wing.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DiegoRosales before reusing the design.