2 layers120 × 99.5 mm
USB relay switch
calcite/ResetBuddy
Simple programmable HW interface for restarting evaluation boards and other electronic devices during automated testing.
93 partsMIT
2 layers72.4 × 78.7 mm
AudioInterface
Diabltica/AudioInterfaceAn hardware audio interface featuring an ouput selector and an amplifier powered by usb C
- Size
- 72.4 × 78.7 mm
- Copper layers
- 2
- Thickness
- 1.66 mm
- Parts
- 91
- Nets
- 73
- Pads
- 394
- Tracks, vias
- 466, 48
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Dec 2024
- Updated
- 24 Dec 2024
Overview
AudioInterface is an open-source printed circuit board by Diabltica, from the Diabltica/AudioInterface repository on GitHub. It is a 2-layer board of 72.4 × 78.7 mm with 91 parts on 73 nets, routed with 466 tracks and 48 vias.
It is built around the ATTINY9-TS8R, TPA3111D1QPWPRQ1 and HUSB238_002DD, with the L78L05ABUTR, FBMJ3216HS800-TV and AONS21321 among its other parts. Its parts include 32 capacitors, 20 resistors, 8 connectors, 5 ICs and 4 diodes. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
12
ATTINY9-TS8R
SOT-23-6-40℃~+125℃ 1.8V~5.5V 10MHz 1KB 32Byte 4 8 Bit AVR Built-in FLASH SOT-23-6 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
TPA3111D1QPWPRQ1
HTSSOP-28-40℃~+125℃ 0.05% 1 Pair Differential Inputs 1-Channel 102dB 10Wx1@8Ω 40mA 70dB 8V~26V 94% Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture、ESD protection、Digitally programmable gain Class D HTSSOP-28 Audio Amplifiers ROHSTexas InstrumentsAudio Amplifiers
HUSB238_002DD
DFN-10L(3x3)-40℃~+85℃ 1 3.1mA 3V~25V DFN-10L(3x3) USB Converters ROHSHynetekUSB Converters
L78L05ABUTR
SOT-89-3-40℃~+125℃@(Tj) 1 1.7V@(40mA) 100mA 30V 40uV 49dB@(120Hz) 5V 6mA Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
FBMJ3216HS800-TV
1206-40℃~+125℃ 1 10mΩ 4A 80Ω@100MHz ±25% 1206 Ferrite Beads ROHSTaiyo YudenFerrite Beads
AONS21321
DFN(5x6)-55℃~+150℃ 1 P-Channel 1.18nF 1.3V 155pF 16.5mΩ@10V 24A 30V 34nC@10V DFN(5x6) MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
IM03DGR
SMD-8P,10x6mmSMD-8P,10x6mm Signal Relays ROHSTE ConnectivitySignal Relays
PJ-393-8P
SMDUncategorisedXUNPU
PJ-603
插件插件 Audio Connectors ROHSLegionAudio Connectors
RK27112A0A16
DIP-6P,27x24.5mm100kΩ 50mW ±20% DIP-6P,27x24.5mm Potentiometers, Variable Resistors ROHSALPSALPINEPotentiometers & Variable Resistors
SML-P11UTT86R
0402-40℃~+85℃ 1.8V 1mA 2.5mcd 50mW 621nm 632nm Discrete Diode Orange Red Top-mount 0402 LED Indication - Discrete ROHSROHM SemiconductorLED Indication - Discrete
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C5, C11, C14, C16, C17, C24, C25, C27, C30 |
| 9 | 1µ | Capacitor_SMD:C_0402_1005Metric | C1, C6, C7, C8, C9, C20, C21, C22, C23 |
| 8 | 1n | Capacitor_SMD:C_0402_1005Metric | C12, C15, C18, C19, C28, C31, C32, C33 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4, H5, H6 |
| 6 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric | R13, R15, R19, R20 |
| 4 | 100µ | Capacitor_SMD:CP_Elec_6.3x7.7 | C10, C13, C26, C29 |
| 4 | 2.2k | Resistor_SMD:R_0402_1005Metric | R9, R10, R11, R12 |
| 4 | FBMJ3216HS800-TV | Inductor_SMD:L_1206_3216Metric | FB1, FB2, FB3, FB4 |
| 3 | 10 | Resistor_SMD:R_0402_1005Metric | R1, R14, R18 |
| 2 | 1N4148 | Diode_SMD:D_SOD-123 | D2, D4 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R16, R17 |
| 2 | TPA3111D1QPWPRQ1 | 0__:SOP65P640X120-29N | U4, U5 |
| 1 | 150 | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 18k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 330n | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 4.53k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 470k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 49.9k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | AONS21321 | 0__:DFN-8_L6.0-W5.0-P1.27-LS6.2-BL | Q1 |
| 1 | ATTINY9-TS8R | 0__:SOT95P270X145-6N | U2 |
| 1 | AVR-ISP-6 | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J2 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | FromMotherboard | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | HUSB238_002DD | 0__:DFN-10_L3.0-W3.0-P0.50-BL-EP2.5 | U1 |
| 1 | IM03DGR | 0__:RELAY_IM03DGR | K1 |
| 1 | L78L05ABUTR | 0__:L78L05ABUTR | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | PG151101S11 | 0__:Kailh_socket_MX | S1 |
| 1 | PJ-393-8P | 0__:AUDIO-TH_PJ-393-8A | J3 |
| 1 | PJ-603 | 0__:AUDIO-TH_PJ-603 | J4 |
| 1 | RK27112A0A16 | 0__:RES-ADJ-TH_RK27112A0A16 | Pt1 |
| 1 | SML-P11MTT86RH | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | SML-P11UTT86R | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | Speaker ouput L | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Speaker ouput R | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | TYPE-C 16PIN L8.35 | 0__:TYPE-C-SMD_20009-UCAF001-X | J1 |
| 1 | ToFront | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
Questions
How big is the AudioInterface PCB?
It measures 72.4 × 78.7 mm and has 2 copper layers, 1.66 mm thick.
What parts does the AudioInterface use?
91 parts, built around the ATTINY9-TS8R, TPA3111D1QPWPRQ1, HUSB238_002DD and L78L05ABUTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AudioInterface KiCad files?
From the Diabltica/AudioInterface repository on GitHub, at the commit this page was made from: the board is AudioInterface.kicad_pcb and its schematic AudioInterface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AudioInterface design in my own project?
Its repository states no licence, so its author keeps all rights: ask Diabltica before reusing the design.
Similar boards
- 2 layers104.1 × 54.6 mm
- 2 layers24.6 × 11.1 mm
PWM+fan stop
yvoronkin/FANSTOP
In a small form factor, an extension of the fan control is implemented.
24 parts2CERN-OHL-S-2.0 - 2 layers103 × 54 mm
- 2 layers40.1 × 54.3 mm
- 6 layers40 × 56 mm
Headstage-16stim
open-ephys/onix-headstage-16stim
Serialized, multifunction bi-directional headstage for tetrodes and silicon probes
132 parts1 - 6 layers40 × 51 mm
Headstage-64s
open-ephys/onix-headstage-64s
Serialized, multifunction headstage for tetrodes and silicon probes
123 parts - 4 layers60 × 60 mm
Headstage neuropix1e
open-ephys/onix-headstage-neuropix1e
ONIX Neuropixels 1.0 Economical Headstage
80 parts