2 layers54.9 × 33 mm
2 layers44.5 × 31.8 mm
ESP12 Module
dgode4c/ESP12_ModuleSchematic and PCB design by shota
- Size
- 44.5 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 18
- Pads
- 63
- Tracks, vias
- 156, 29
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Sep 2020
- Updated
- 22 Sep 2020
Overview
ESP12 Module is an open-source printed circuit board by dgode4c, from the dgode4c/ESP12_Module repository on GitHub. It is a 2-layer board of 44.5 × 31.8 mm with 19 parts on 18 nets, routed with 156 tracks and 29 vias.
It is built around the ESP-12S. Its parts include 9 resistors, 4 connectors, 2 diodes, 2 switches and 1 capacitor. It belongs with the ESP8266 boards of this library.
Main components
1README
README.mdParts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R11, R12, R13 |
| 3 | R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R7 |
| 2 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1, J2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW3, SW4 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R14 |
| 1 | 220R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | ESP-12S | ESP-12S:ESP-12S | U2 |
| 1 | Screw_Terminal_01x02 | ESP12Module:TerminalBlock01x02 | J3 |
Questions
How big is the ESP12 Module PCB?
It measures 44.5 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP12 Module use?
19 parts, built around the ESP-12S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP12 Module KiCad files?
From the dgode4c/ESP12_Module repository on GitHub, at the commit this page was made from: the board is ESP12Module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP12 Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask dgode4c before reusing the design.
Similar boards
- 4 layers47 × 32.9 mm
Raesp gateway
cziter15/raesp_gateway
:satellite: A standalone device project featuring SX1278 and ESP8266 components, serving as a radio-WiFi gateway.
17 parts11GPL-3.0 - 2 layers93 × 20 mm
- 4 layers77 × 83 mm
GeoMCU
NohPei/GeoMCU
Integrated Geophone Boards with programmable gain and an onboard MCU. Can be used over WiFi or wired with an external ADC.
80 parts2CERN-OHL-P-2.0 - 2 layers118.7 × 86.4 mm
- 2 layers120 × 100 mm
- 2 layers64.8 × 62.2 mm
- 2 layers35.1 × 36.3 mm
