
H bridge
dfdc1123/knead-net-gui
This KiCad project was converted from the GPL-3.0 TM1637 display module published by zhbaa on OSHWHub and normalized to the project name tm1637-display-module.

This KiCad project was converted from the GPL-3.0 TM1637 display module published by zhbaa on OSHWHub and normalized to the project name tm1637-display-module.
NE555+CD4017 is an open-source printed circuit board by dfdc1123, from the dfdc1123/knead-net-gui repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 27 parts on 28 nets.
It is built around the NE555P. Its parts include 13 resistors, 10 diodes, 2 capacitors and 2 ICs.
This KiCad project was converted from the GPL-3.0
TM1637 display module published by zhbaa
on OSHWHub and normalized to the project name tm1637-display-module. KiCad
local history, nested Git metadata, lock files, and local preference files are
intentionally omitted.
All PCB component pads are through-hole. The project is kept as a manual
example and a regression fixture for physical footprint bounds. In particular,
LED1 uses Display_7Segment:CA56-12CGKWA: its pins occupy a much smaller
area than the display body drawn on F.Fab. KneadNet must use the footprint
body outline for rendering and collision checks, with the pin extent only as a
fallback when no usable footprint graphics exist.
H1 and U4 use KiCad's standard vertical 1×4 through-hole pin-header
footprint. This supersedes the earlier imported copy that incorrectly used fan
header footprints for those connectors.
该工程来自 zhbaa 在立创开源硬件平台以 GPL 3.0 发布的
TM1637 数码管模块,
由嘉立创 EDA 转换为 KiCad 后将工程名统一为 tm1637-display-module。本地历史、
嵌套 Git 数据、锁文件和本机偏好文件不纳入示例。
PCB 中的元件焊盘均为直插。该工程既用于手动测试,也用于封装物理边界回归测试。尤其是
LED1 使用 Display_7Segment:CA56-12CGKWA:引脚覆盖范围远小于 F.Fab
层描述的数码管本体。KneadNet 应使用封装本体外形进行渲染和碰撞检测,只有在找不到可用
封装图形时才回退到引脚范围。
H1 和 U4 现使用 KiCad 标准的 1×4、2.54 mm 直插排针封装,取代了早期导入版本中
不正确的风扇排针封装。
The imported project remains attributed to zhbaa and distributed under the
upstream project's stated GPL 3.0 license.
导入工程保留对原作者 zhbaa 的署名,并遵循原项目标明的 GPL 3.0 许可证。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 10 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 2 | 1uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 4017 | Package_DIP:DIP-16_W10.16mm | U2 |
| 1 | 50k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |

dfdc1123/knead-net-gui
This KiCad project was converted from the GPL-3.0 TM1637 display module published by zhbaa on OSHWHub and normalized to the project name tm1637-display-module.

dfdc1123/knead-net-gui
This KiCad project was converted from the GPL-3.0 TM1637 display module published by zhbaa on OSHWHub and normalized to the project name tm1637-display-module.

dfdc1123/knead-net-gui
This KiCad project was converted from the GPL-3.0 TM1637 display module published by zhbaa on OSHWHub and normalized to the project name tm1637-display-module.

dfdc1123/knead-net-gui
This KiCad project was converted from the GPL-3.0 TM1637 display module published by zhbaa on OSHWHub and normalized to the project name tm1637-display-module.

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
27 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dfdc1123/knead-net-gui repository on GitHub, at the commit this page was made from: the board is examples/NE555+CD4017/NE555+CD4017.kicad_pcb and its schematic examples/NE555+CD4017/NE555+CD4017.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).