2 layers173.6 × 133.9 mm
Mykeyboard left
devoymac/Mykeyboard
Teclado ergonómico split de diseño propio. Proyecto de hardware abierto: esquemáticos y PCB en KiCad, firmware en QMK, y carcasa imprimible en 3D.
81 parts
2 layers196.1 × 133.9 mm
Mykeyboard right
devoymac/MykeyboardTeclado ergonómico split de diseño propio. Proyecto de hardware abierto: esquemáticos y PCB en KiCad, firmware en QMK, y carcasa imprimible en 3D.
- Size
- 196.1 × 133.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 65
- Pads
- 330
- Tracks, vias
- 399, 19
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Oct 2026
- Updated
- 5 Oct 2026
Overview
Mykeyboard right is an open-source printed circuit board by devoymac, from the devoymac/Mykeyboard repository on GitHub. It is a 2-layer board of 196.1 × 133.9 mm with 87 parts on 65 nets, routed with 399 tracks and 19 vias.
Its parts include 43 switches, 42 diodes, 1 IC and 1 connector. It belongs with the RP2040 boards of this library.
README
README.mdMykeyboard — Split Ergo Keyboard
Teclado ergonómico split de diseño propio. Proyecto de hardware abierto: esquemáticos y PCB en KiCad, firmware en QMK, y carcasa imprimible en 3D.
Layout
Split columnar-stagger ISO-ES (español completo: Ñ, Ç, ‡, ¡, ¿), ~38 teclas por mitad, espacio dividido y flechas dedicadas.
Estado
En desarrollo. Estructura del proyecto montada, KiCad 10.0.6 instalado, requisitos y layout definidos.
Estructura del proyecto
Mykeyboard/
├── hardware/ # Diseño electrónico (KiCad)
│ ├── left/ # Mitad izquierda (esquemático + PCB)
│ ├── right/ # Mitad derecha (espejo de la izquierda)
│ └── shared/ # Librerías, símbolos, footprints y plantillas comunes
├── firmware/ # Firmware del teclado (QMK)
├── case/ # Carcasa imprimible en 3D (STL / FreeCAD)
├── docs/ # Documentación: requisitos, layout, BOM, decisiones
├── tools/ # Scripts de utilidad (generación, automatización)
└── README.mdHardware
- KiCad: 10.0.6 (esquemático y PCB).
- Layout: split columnar-stagger ISO-ES, ~37-38 teclas por mitad, placa única que se parte en dos (V-cut/mouse bites).
- Controlador: RP2040-Zero por mitad, conectadas por TRRS.
- Switches: Outemu Silent Lemon V3 (táctiles silenciosos), soldados.
- Pantalla: OLED 128x32 (I2C) en la mitad izquierda.
- Extras: encoder rotatorio EC11 (volumen/medios) en la mitad derecha.
- Ver docs/requirements.md, docs/layout.md y el BOM.
Firmware
QMK (cableado).
Cómo contribuir / desarrollo
- Clona el repositorio.
- Abre los proyectos de KiCad en
hardware/leftyhardware/right. - Documenta cualquier cambio relevante en
docs/.
Licencia
Pendiente de decidir (recomendado: CERN-OHL-S para hardware, MIT para firmware).
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | ~ | ScottoKeebs_Components:Diode_DO-35 | D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55 +26 |
| 42 | ~ | ScottoKeebs_MX:MX_PCB_1.00u | S40, S41, S42, S43, S44, S45, S46, S47, S48, S49, S50, S51, S52, S53, S54, S55 +26 |
| 1 | AudioJack4 | Connector_Audio:Jack_3.5mm_PJ320D_Horizontal | J3 |
| 1 | RP2040_Zero | ScottoKeebs_MCU:RP2040_Zero | U2 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
More from devoymac/Mykeyboard
1Similar boards
- 2 layers175.8 × 184.8 mm
SofleKeyboard
josefadamcik/SofleKeyboard
A split keyboard based on Lily58, Crkbd and Helix keyboards
87 parts2.6k - 2 layers58.2 × 38.1 mm
Usb sniffer
ataradov/usb-sniffer
Low-cost LS/FS/HS USB sniffer with Wireshark interface
87 parts1.3kBSD-3-Clause - 2 layers65 × 56 mm
- 2 layers57 × 111 mm
- 2 layers128.2 × 150.3 mm
- 2 layers88.9 × 80 mm
- 2 layers38.1 × 101.6 mm
- 2 layers68.6 × 53.3 mm
Arduino UNO R4 Minima
sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
87 parts95WTFPL
Questions
How big is the Mykeyboard right PCB?
It measures 196.1 × 133.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mykeyboard right use?
87 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mykeyboard right KiCad files?
From the devoymac/Mykeyboard repository on GitHub, at the commit this page was made from: the board is hardware/right/Mykeyboard_right.kicad_pcb and its schematic hardware/left/Mykeyboard_left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mykeyboard right design in my own project?
Its repository states no licence, so its author keeps all rights: ask devoymac before reusing the design.