Skip to the content
2 layers173.6 × 133.9 mmMykeyboard left, the printed circuit board in 3D

Mykeyboard left

devoymac/Mykeyboard

Teclado ergonómico split de diseño propio. Proyecto de hardware abierto: esquemáticos y PCB en KiCad, firmware en QMK, y carcasa imprimible en 3D.

Size
173.6 × 133.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
81
Nets
62
Pads
306
Tracks, vias
345, 9
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Oct 2026
Updated
5 Oct 2026

Overview

Mykeyboard left is an open-source printed circuit board by devoymac, from the devoymac/Mykeyboard repository on GitHub. It is a 2-layer board of 173.6 × 133.9 mm with 81 parts on 62 nets, routed with 345 tracks and 9 vias.

Its parts include 39 diodes, 39 switches, 2 connectors and 1 IC. It belongs with the RP2040 boards of this library.

README

README.md

Mykeyboard — Split Ergo Keyboard

Teclado ergonómico split de diseño propio. Proyecto de hardware abierto: esquemáticos y PCB en KiCad, firmware en QMK, y carcasa imprimible en 3D.

Layout

Split columnar-stagger ISO-ES (español completo: Ñ, Ç, ‡, ¡, ¿), ~38 teclas por mitad, espacio dividido y flechas dedicadas.

Layout del teclado

Estado

En desarrollo. Estructura del proyecto montada, KiCad 10.0.6 instalado, requisitos y layout definidos.

Estructura del proyecto

text
Mykeyboard/
├── hardware/          # Diseño electrónico (KiCad)
│   ├── left/          # Mitad izquierda (esquemático + PCB)
│   ├── right/         # Mitad derecha (espejo de la izquierda)
│   └── shared/        # Librerías, símbolos, footprints y plantillas comunes
├── firmware/          # Firmware del teclado (QMK)
├── case/              # Carcasa imprimible en 3D (STL / FreeCAD)
├── docs/              # Documentación: requisitos, layout, BOM, decisiones
├── tools/             # Scripts de utilidad (generación, automatización)
└── README.md

Hardware

  • KiCad: 10.0.6 (esquemático y PCB).
  • Layout: split columnar-stagger ISO-ES, ~37-38 teclas por mitad, placa única que se parte en dos (V-cut/mouse bites).
  • Controlador: RP2040-Zero por mitad, conectadas por TRRS.
  • Switches: Outemu Silent Lemon V3 (táctiles silenciosos), soldados.
  • Pantalla: OLED 128x32 (I2C) en la mitad izquierda.
  • Extras: encoder rotatorio EC11 (volumen/medios) en la mitad derecha.
  • Ver docs/requirements.md, docs/layout.md y el BOM.

Firmware

QMK (cableado).

Cómo contribuir / desarrollo

  1. Clona el repositorio.
  2. Abre los proyectos de KiCad en hardware/left y hardware/right.
  3. Documenta cualquier cambio relevante en docs/.

Licencia

Pendiente de decidir (recomendado: CERN-OHL-S para hardware, MIT para firmware).

Parts

81
QtyValueFootprintReferences
39~ScottoKeebs_Components:Diode_DO-35D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +23
39~ScottoKeebs_MX:MX_PCB_1.00uS1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +23
1AudioJack4Connector_Audio:Jack_3.5mm_PJ320D_HorizontalJ2
1OLED_128x32ScottoKeebs_Components:OLED_128x32J1
1RP2040_ZeroScottoKeebs_MCU:RP2040_ZeroU1

More from devoymac/Mykeyboard

1
  • 2 layers196.1 × 133.9 mmMykeyboard right, the printed circuit board in 3D

    Mykeyboard right

    devoymac/Mykeyboard

    Teclado ergonómico split de diseño propio. Proyecto de hardware abierto: esquemáticos y PCB en KiCad, firmware en QMK, y carcasa imprimible en 3D.

    87 parts

Similar boards

  • 2 layers162.9 × 178.9 mmAMPCD, the printed circuit board in 3D

    AMPCD

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    81 parts431
  • 2 layers177.2 × 114.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    81 parts184
  • 2 layersEdrumulus, the printed circuit board in 3D

    Edrumulus

    corrados/edrumulus

    Open Source E-Drum Trigger Module

    81 parts163GPL-2.0
  • 2 layers64 × 55 mmZynthiandac bk2, the printed circuit board in 3D

    Zynthiandac bk2

    zynthian/zynthian-hw

    Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

    81 parts156
  • 2 layersBD0027, the printed circuit board in 3D

    BD0027

    schlae/VapeRE

    Reverse engineered disposable v a p e boards

    81 parts136
  • 2 layers41.9 × 62.8 mmColumn, the printed circuit board in 3D

    Column

    AlaaSaadAbdo/Rommana

    A 30 key well powered by Xiao BLE

    81 parts105
  • 2 layers38.6 × 38.6 mmIotLedDriver, the printed circuit board in 3D

    IotLedDriver

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    81 parts94BSD-3-Clause
  • 2 layers98.5 × 45.4 mmIdawgz32, the printed circuit board in 3D

    Idawgz32

    ChrisChrisLoLo/idawgz32

    A full 32 key mechanical keyboard that can be made for only $5

    81 parts77GPL-3.0

Questions

How big is the Mykeyboard left PCB?

It measures 173.6 × 133.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mykeyboard left use?

81 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mykeyboard left KiCad files?

From the devoymac/Mykeyboard repository on GitHub, at the commit this page was made from: the board is hardware/left/Mykeyboard_left.kicad_pcb and its schematic hardware/left/Mykeyboard_left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mykeyboard left design in my own project?

Its repository states no licence, so its author keeps all rights: ask devoymac before reusing the design.