
Buck Converter
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

Intro Project for Mechatronics Club SDSU
DrethafordIntroP is an open-source printed circuit board by Devin-Rethaford, from the Devin-Rethaford/STM32Intro.Project repository on GitHub. It is a 4-layer board of 73 × 61 mm with 21 parts on 44 nets, routed with 276 tracks and 13 vias.
Its parts include 7 capacitors, 3 resistors, 3 connectors, 2 diodes and 1 IC. It belongs with the STM32 boards of this library.
Introduction project for mechatronics club SDSU. My first PCB design and familiarization with KiCad software. Small learning curve for this project especially with understanding power and GND planes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 30pF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 510R | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | Conn_01x20 | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 16MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | On-Board LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | PWR LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

i2cjak/Framework_Expansion_Cards
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop

reneklootwijk/mideahvac-dongle
This repository contains the hardware design of a WiFi dongle for Midea-like airconditioners and humidifiers. Midea provides a WiFi dongle (SK102/SK103), either as optional feature or built-in, to control the appliances…



OpenSiPM/sipm-bias-control
Single channel silicon photomultipliers for high-speed fluorescence imaging


It measures 73 × 61 mm and has 4 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Devin-Rethaford/STM32Intro.Project repository on GitHub, at the commit this page was made from: the board is DrethafordIntroP.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Devin-Rethaford before reusing the design.