2 layers32.2 × 47.7 mm
2 layers64.7 × 47.9 mm
Cable to banana
devEmbedded/differential_probe32Modular differential probe (DEDP-100)
- Size
- 64.7 × 47.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 150
- Nets
- 7
- Pads
- 270
- Tracks, vias
- 380, 30
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Aug 2021
- Updated
- 10 Sep 2021
Overview
Cable to banana is an open-source printed circuit board by devEmbedded, from the devEmbedded/differential_probe repository on GitHub. It is a 2-layer board of 64.7 × 47.9 mm with 150 parts on 7 nets, routed with 380 tracks and 30 vias.
Its parts include 60 capacitors, 60 resistors and 30 connectors. It belongs with the sensors and measurement boards of this library.
README
README.mdModular differential probe (DEDP-100)
This repository contains the design files of a 100 MHz differential probe for use with oscilloscopes. The design is modular and consists of a base amplifier unit with exchangeable probe tip accessories. The accessory can be chosen to fit the desired voltage range and connection type.
Currently this project is still in development. While the prototype revisions work well, they are still being redesigned for improvements.
Files
License
The design files in this repository are available under CC-BY-SA 3.0 license.
Commercial reproduction of this design is allowed, but the devEmbedded trademark must not be used to advertise third-party products. Attribution must be included in documentation or marketing materials.
Suggested format for attribution:
This device is based on an open source design: https://github.com/devEmbedded/differential_probe
Parts
150| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | 10M | oscilloscope-probes:Minimal1206 | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2 +34 |
| 50 | 10pF | oscilloscope-probes:Minimal1206 | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C2, C2, C2, C2, C2, C2 +34 |
| 10 | 360pF | Capacitor_SMD:C_0603_1608Metric | C6, C6, C6, C6, C6, C6, C6, C6, C6, C6 |
| 10 | 499k | Resistor_SMD:R_0603_1608Metric | R6, R6, R6, R6, R6, R6, R6, R6, R6, R6 |
| 10 | Banana | oscilloscope-probes:SIMPLE_PAD | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 |
| 10 | GND | oscilloscope-probes:SIMPLE_PAD | J3, J3, J3, J3, J3, J3, J3, J3, J3, J3 |
| 10 | Out | oscilloscope-probes:SIMPLE_PAD | J2, J2, J2, J2, J2, J2, J2, J2, J2, J2 |
More from devEmbedded/differential_probe
4- 4 layers25.6 × 38.6 mm
- 2 layers45.5 × 30 mm
- 2 layers120.6 × 62 mm
Similar boards
- 2 layers310.8 × 106.1 mm
- 2 layers365.1 × 203.2 mm
DIAG
Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.
150 parts172 - 2 layers82 × 82 mm
Back
johanwheeler/ch32-fireplace
Ch32 based christmas card with 8x8 screen, sound and capacitive buttons
150 parts33MIT - 2 layers160 × 100 mm
Pico euro
shabaz123/pico-eurocard
This repository contains PCB Gerber files and bill of materials for a Pi Pico Eurocard Development Board. See James' Workshop Wednesday's Video which demonstrates the revision 2.0 board.
150 parts19 - 2 layers304.8 × 95.3 mm
65 keyboard untitled
eightbitraptor/65_keyboard_untitled
My as yet unnamed 65% keyboard design
150 parts15 - 2 layers235 × 160 mm
Memory.ROMRAM
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
150 parts15 - 2 layers168 × 110 mm
- 2 layers70 × 110 mm
Questions
How big is the Cable to banana PCB?
It measures 64.7 × 47.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cable to banana use?
150 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cable to banana KiCad files?
From the devEmbedded/differential_probe repository on GitHub, at the commit this page was made from: the board is accessories/cable_to_banana/cable_to_banana.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cable to banana design in my own project?
Its repository states no licence, so its author keeps all rights: ask devEmbedded before reusing the design.