4 layers97.5 × 99.9 mm
Esp32 wled controller
fellettigiacomo/esp32-WLED-4ch-controller
Open source 4 Channel esp32-powered WLED controller with 4 relays and built in level shifter
100 parts16CERN-OHL-S-2.0
2 layers39 × 83.2 mm
Data Logger Anedya
dev-wadhvani/Inverter-PCB-- Size
- 39 × 83.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 120
- Nets
- 102
- Pads
- 412
- Tracks, vias
- 847, 224
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Feb 2026
- Updated
- 4 Feb 2026
Overview
Data Logger Anedya is an open-source printed circuit board by dev-wadhvani, from the dev-wadhvani/Inverter-PCB- repository on GitHub. It is a 2-layer board of 39 × 83.2 mm with 120 parts on 102 nets, routed with 847 tracks and 224 vias.
It is built around the ESP8684H2, SN74LV1T08DBVR-JSM and BC847, with the SMBJ8.5CA, 100UF/16V and EC800G-CN-GA among its other parts. Its parts include 37 resistors, 33 capacitors, 10 diodes, 8 ICs and 7 transistors. It belongs with the sensors and measurement boards of this library.
Main components
10
ESP8684H2
QFN-24(4x4)-40℃~+105℃ -99dBm 2.412GHz~2.484GHz 2.4GHz 21.5dBm 370mA 3V~3.6V 65mA 72.2Mbps Bluetooth、WiFi DMA function SPI、UART、ADC、I2C、PWM QFN-24(4x4) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
SN74LV1T08DBVR-JSM
SOT-23-5LSOT-23-5L Logic Gates ROHSJSMSEMILogic Gates
BC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
SMBJ8.5CA
DO-214AA(SMB)-65℃~+150℃ 10.4V 14.4V 20uA 390pF 41.7A 600W@10/1000us 8.5V Bidirectional TVS DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSTWGMCESD And Surge Protection (TVS/ESD)
100UF/16V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorisedEC800G-CN-GA
LCC-LGALCC-LGA New Arrivals ROHSQuectelUncategorised
ECS-400-10-37B2-CKM-TR
SMD2016-4P-20℃~+70℃ 10pF 40MHz 40Ω ±10ppm ±10ppm SMD2016-4P Crystals ROHSECSCrystalsG85D1160022HHR
SMDSIM Card ConnectorsAmphenol
SMAJ36A
DO-214AC(SMA)-65℃~+150℃ 1uA 36V 400W@10/1000us 44.2V 58.1V 6.9A@10/1000us TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
SRV05-4.TCT
SOT-23-6L-55℃~+125℃ 12A@8/20us 17.5V 300W@8/20us 3pF 5V 5uA 6V Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHSSEMTECHESD And Surge Protection (TVS/ESD)
README
README.mdInverter-PCB-
Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP14, TP15, TP16, TP17, TP18, TP19, TP20 |
| 12 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R6, R7, R11, R14, R18, R26, R27, R28, R30, R32 |
| 9 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C11, C12, C16, C17, C19, C26, C29, C37 |
| 7 | 0R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8, R9, R19, R25, R36, R37, R38 |
| 7 | 120R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R12, R13, R21, R22, R29, R35 |
| 7 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q5, Q6, Q7, Q8 |
| 6 | 1K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16, R17, R20, R23, R31, R33 |
| 6 | LED_0402 | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D2, D3, D5, D6, D8, D10 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7, C8, C14, C35, C36 |
| 5 | 33pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C27, C30, C31, C32, C33 |
| 4 | SN74LV1T08DBVR | SN74LV1T08DBVR:SOT95P280X145-5N | IC5, IC6, IC7, IC8 |
| 3 | 10pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C10, C28 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C13 |
| 2 | 22uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C5 |
| 2 | SMBJ8.5CA | SMBJ8.5CA BiDirDiode:DIONM5436X244N | D1, D9 |
| 1 | 1.8pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C34 |
| 1 | 100uF/16V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C25 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C15 |
| 1 | 15K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24 |
| 1 | 16k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 2.0nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L2 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C21 |
| 1 | 3.9k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4 |
| 1 | 3.9pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C20 |
| 1 | 4.7uH | Inductor_SMD:L_6.3x6.3_H3 | L1 |
| 1 | 47pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 1 | 499R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5 |
| 1 | 51K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15 |
| 1 | 6130XX11121_61300611121 | 6Pin:61300611121 | J4 |
| 1 | AP62200TWU-7 | AP62200TWU-7 Buck:SOT95P280X100-6N | IC1 |
| 1 | DE9_Pins_MountingHoles | Connector_Dsub:DSUB-9_Pins_EdgeMount_P2.77mm | J3 |
| 1 | EC800G-CN | EG800G-CN:EG800G-CN | GSM1 |
| 1 | ECS-400-10-37B2-CKM-TR | ECS-400-10-37B2-CKM-TR Crystal:ECS4001037B2CKMTR | Y1 |
| 1 | ESP8684H2 | ESP8684:QFN24_4X4_EXP | U1 |
| 1 | G85D1160022HHR | G85D1160022HHR:G85D1160022HHR_AMP | J5 |
| 1 | NCA3176 | THVD1400DR_RS485:D0008B-IPC_A | U2 |
| 1 | SMAJ36A | Diode_SMD:D_SMA | D4 |
| 1 | SRV05-4.TCT | SRV05-4.TCT Diode Array12:SOT95P280X145-6N | D7 |
| 1 | SW_MEC_5G | Button_Switch_SMD:SW_SPST_TS-1088-xR025 | SW1 |
| 1 | TLV77333PDBVR | SN74LV1T08DBVR:SOT95P280X145-5N | IC4 |
| 1 | U.FL-R-SMT_01_ | UFL:HRS_U.FL-R-SMT_01_ | J2 |
Similar boards
- 4 layers84.4 × 68.2 mm
Phenobottle sensorboard
Flynsky/phenobottle-sensorboard
Phenobottle Sensor Board – A compact board for monitoring and controlling algae growth chambers, featuring pH, temperature, and light measurement frontends, a high-gain dual-stage transimpedance amplifier, a capacitive…
160 parts - 2 layers70.1 × 15.1 mm
- 4 layers23.2 × 43 mm
- 4 layers22 × 22.2 mm
Tasgdo
nrwiersma/tasgdo
TasGDO is an ESP32 Garage Door Controller, intended to be used with Tasmota for a local Matter controller.
41 partsMIT - 2 layers80 × 65 mm
- 4 layers50.8 × 94 mm
- 4 layers32.2 × 34.1 mm
Questions
How big is the Data Logger Anedya PCB?
It measures 39 × 83.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Data Logger Anedya use?
120 parts, built around the ESP8684H2, SN74LV1T08DBVR-JSM, BC847 and SMBJ8.5CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Data Logger Anedya KiCad files?
From the dev-wadhvani/Inverter-PCB- repository on GitHub, at the commit this page was made from: the board is Data_Logger_Anedya.kicad_pcb and its schematic Data_Logger_Anedya.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Data Logger Anedya design in my own project?
Its repository states no licence, so its author keeps all rights: ask dev-wadhvani before reusing the design.