Skip to the content
2 layers100 × 130 mmKBI, the printed circuit board in 3D

Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Size
100 × 130 mm
Copper layers
2
Thickness
1.6 mm
Parts
75
Nets
60
Pads
189
Tracks, vias
8, 16
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 May 2026
Updated
28 Aug 2026

Overview

KBI is an open-source printed circuit board by Desval27, from the Desval27/FormantKO repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 130 mm with 75 parts on 60 nets, routed with 8 tracks and 16 vias.

Its parts include 28 resistors, 19 connectors, 9 capacitors, 6 ICs and 2 diodes. It belongs with the audio and music boards of this library.

README

MFOS/panels/ANALOG/README.md

ANALOG

CV-16

Format: 6U

Status

⚠️ Incomplete⚠️

Documents

Gerber to Order

⚠️ Untested⚠️

Images

Rendered Panel Front

Rendered Panel Back

Parts

75
QtyValueFootprintReferences
7100kFormantKO:R_Axial_HorizontalR8, R9, R11, R13, R15, R16, R25
51kFormantKO:R_Axial_HorizontalR1, R5, R19, R24, R28
5680nFormantKO:C_RectC2, C3, C7, C8, C9
412kFormantKO:R_Axial_HorizontalR2, R4, R6, R26
4MountingHoleFormantKO:MountingHole_2.7mm_M2.5H1, H2, H3, H4
4N-FETFormantKO:TO-92T1, T2, T3, T4
3100kFormantKO:PanelConnector_1x03P2, P3, P5
210kFormantKO:R_Axial_HorizontalR14, R20
247kFormantKO:R_Axial_HorizontalR10, R17
2DUSFormantKO:DUSD1, D2
2Generic_OpAmp_Single_SwapFormantKO:DIP-8IC5, IC6
2OpAmpFormantKO:DIP-8IC1, IC2
2µA741CFormantKO:DIP-8IC3, IC4
1+15VFormantKO:Wire_1x01_GeneralJ1
1-15VFormantKO:Wire_1x01_GeneralJ2
1100RFormantKO:R_Axial_HorizontalR18
1100kFormantKO:Potentiometer_Trimmer_MultiTurnP4
1100kFormantKO:Potentiometer_TrimmerP7
113k7FormantKO:R_Axial_HorizontalR23
115kFormantKO:R_Axial_HorizontalR12
11MFormantKO:PanelConnector_1x03P1
11MFormantKO:R_Axial_HorizontalR3
11nFormantKO:C_RectC4
1200nFormantKO:C_RectC1
1220nFormantKO:C_RectC6
122nFormantKO:C_RectC5
12V3FormantKO:KEYSTONE_5001TP1
12k2FormantKO:R_Axial_HorizontalR27
1300kFormantKO:R_Axial_HorizontalR7
14V7FormantKO:KEYSTONE_5001TP2
14k7FormantKO:R_Axial_HorizontalR21
14k7FormantKO:Potentiometer_Trimmer_MultiTurnP6
1750RFormantKO:R_Axial_HorizontalR22
1AFormantKO:Wire_1x01_GeneralJ7
1BFormantKO:Wire_1x01_GeneralJ8
1CFormantKO:Wire_1x01_GeneralJ9
1DFormantKO:Wire_1x01_GeneralJ10
1EFormantKO:Wire_1x01_GeneralJ11
1FFormantKO:Wire_1x01_GeneralJ12
1FMFormantKO:Wire_1x01_GeneralJ6
1GFormantKO:Wire_1x01_GeneralJ13
1GNDFormantKO:Wire_1x01_GeneralJ3
1KOVFormantKO:Wire_1x01_GeneralJ4
1~FormantKO:PanelConnector_1x03S1

More from Desval27/FormantKO

12
  • 2 layers160 × 100 mmCLOCK, the printed circuit board in 3D

    CLOCK

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    135 partsMIT
  • 2 layers160 × 233.4 mmVCO, the printed circuit board in 3D

    VCO

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    129 partsMIT
  • 2 layers160 × 233.4 mmVCF 24, the printed circuit board in 3D

    VCF 24

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    112 partsMIT
  • 2 layers160 × 100 mmDELAYED MOD, the printed circuit board in 3D

    DELAYED MOD

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    101 partsMIT
  • 2 layers160 × 100 mmANALOG, the printed circuit board in 3D

    ANALOG

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    96 partsMIT
  • 2 layers160 × 100 mmLFOs, the printed circuit board in 3D

    LFOs

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    94 partsMIT
  • 2 layers160 × 233.4 mmRFM, the printed circuit board in 3D

    RFM

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    93 partsMIT
  • 2 layers160 × 100 mmVC LFOs, the printed circuit board in 3D

    VC LFOs

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    92 partsMIT
  • 2 layers160 × 100 mmCOM, the printed circuit board in 3D

    COM

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    85 partsMIT
  • 2 layers160 × 100 mmADSR, the printed circuit board in 3D

    ADSR

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    82 partsMIT
  • 2 layers160 × 100 mmPHASE SHIFTER, the printed circuit board in 3D

    PHASE SHIFTER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    79 partsMIT
  • 2 layers160 × 100 mmEXPANDER, the printed circuit board in 3D

    EXPANDER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    77 partsMIT

Similar boards

  • 2 layers105.4 × 215.6 mmMIDI Sax, the printed circuit board in 3D

    MIDI Sax

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    75 parts915
  • 2 layers74.4 × 101.1 mmVoron badge, the printed circuit board in 3D

    Voron badge

    tanaes/whopping_Voron_mods

    75 parts787GPL-3.0
  • 2 layers80 × 129.1 mmSmart Plant, the printed circuit board in 3D

    Smart Plant

    JGAguado/Smart_Plant

    The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

    75 parts303
  • 2 layers40.1 × 107.1 mmLogiverter, the printed circuit board in 3D

    Logiverter

    nickajeglin/Eurorack-pcbs

    A collection of easy to solder DIY eurorack PCB's

    75 parts208
  • 2 layers85.1 × 62.2 mmMic extension board, the printed circuit board in 3D

    Mic extension board

    StoneRose35/cortexguitarfx

    guitar effects processor implemented on various arm cortex platforms

    75 parts146
  • 2 layers134 × 96 mmSgkb, the printed circuit board in 3D

    Sgkb

    sago35/tinygo-keyboard

    USB HID keyboard firmware for tinygo

    75 parts119MIT
  • 2 layers50 × 33.5 mmPolyspecusb, the printed circuit board in 3D

    Polyspecusb

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    75 parts114
  • 2 layers50 × 100 mmOvercurrent, the printed circuit board in 3D

    Overcurrent

    thebiguno/microcontroller-projects

    A home for a bunch of microcontroller projects which don't warrant their own repos.

    75 parts75

Questions

How big is the KBI PCB?

It measures 100 × 130 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KBI use?

75 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KBI KiCad files?

From the Desval27/FormantKO repository on GitHub, at the commit this page was made from: the board is system/KBI/KBI.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the KBI design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).