Skip to the content
2 layers160 × 100 mmCALIBRATOR, the printed circuit board in 3D

Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Size
160 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
52
Nets
62
Pads
170
Tracks, vias
251, 0
Pours
12
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 May 2026
Updated
28 Aug 2026

Overview

CALIBRATOR is an open-source printed circuit board by Desval27, from the Desval27/FormantKO repository on GitHub, published under the MIT licence. It is a 2-layer board of 160 × 100 mm with 52 parts on 62 nets, routed with 251 tracks and 0 vias.

It is built around the 1N5239B. Its parts include 20 resistors, 10 crystals, 9 capacitors, 4 ICs and 3 switches. It belongs with the audio and music boards of this library.

Main components

1

README

MFOS/panels/ANALOG/README.md

ANALOG

CV-16

Format: 6U

Status

⚠️ Incomplete⚠️

Documents

Gerber to Order

⚠️ Untested⚠️

Images

Rendered Panel Front

Rendered Panel Back

Parts

52
QtyValueFootprintReferences
10WireConnectorFormantKO:Wire_1x01_D40mil_OD80milX1, X2, X3, X4, X5, X6, X7, X8, X9, X10
5200kFormantKO:R_Axial_Horizontal_P500milR3, R4, R6, R8, R13
4100nFormantKO:C_Rect_P200milC3, C4, C6, C7
320kFormantKO:R_Axial_Horizontal_P500milR5, R12, R19
2100kFormantKO:Potentiometer_Trimmer_MultiTurnR14, R16
2100kFormantKO:R_Axial_Horizontal_P500milR7, R9
210kFormantKO:R_Axial_Horizontal_P500milR1, R20
210μFormantKO:CP_Radial_P100milC2, C8
21N4148FormantKO:DO-35_P400milD1, D2
21k5FormantKO:R_Axial_Horizontal_P500milR15, R17
2220nFormantKO:C_Rect_P200milC5, C9
2OpAmpFormantKO:DIP-8NU3, U4
2SWFormantKO:PanelConnector_1x03S1, S2
110kFormantKO:Potentiometer_Trimmer_MultiTurnR10
11MFormantKO:PanelConnector_1x03R11
11N5239BFormantKO:DO-35_P400milZ1
11kFormantKO:R_Axial_Horizontal_P500milR2
1220kFormantKO:R_Axial_Horizontal_P500milR18
1220µFormantKO:CP_Radial_P100milC1
140106FormantKO:DIP-14NU1
14520FormantKO:DIP-16NU2
1Card BracketFormantKO:CardBracketMH1
1Card ConnectorFormantKO:CardConnectorJ2
1MonoJackFormantKO:PanelConnector_1x02J1
1SW_PushFormantKO:PanelConnector_1x02S3

More from Desval27/FormantKO

12
  • 2 layers160 × 100 mmCLOCK, the printed circuit board in 3D

    CLOCK

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    135 partsMIT
  • 2 layers160 × 233.4 mmVCO, the printed circuit board in 3D

    VCO

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    129 partsMIT
  • 2 layers160 × 233.4 mmVCF 24, the printed circuit board in 3D

    VCF 24

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    112 partsMIT
  • 2 layers160 × 100 mmDELAYED MOD, the printed circuit board in 3D

    DELAYED MOD

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    101 partsMIT
  • 2 layers160 × 100 mmANALOG, the printed circuit board in 3D

    ANALOG

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    96 partsMIT
  • 2 layers160 × 100 mmLFOs, the printed circuit board in 3D

    LFOs

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    94 partsMIT
  • 2 layers160 × 233.4 mmRFM, the printed circuit board in 3D

    RFM

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    93 partsMIT
  • 2 layers160 × 100 mmVC LFOs, the printed circuit board in 3D

    VC LFOs

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    92 partsMIT
  • 2 layers160 × 100 mmCOM, the printed circuit board in 3D

    COM

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    85 partsMIT
  • 2 layers160 × 100 mmADSR, the printed circuit board in 3D

    ADSR

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    82 partsMIT
  • 2 layers160 × 100 mmPHASE SHIFTER, the printed circuit board in 3D

    PHASE SHIFTER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    79 partsMIT
  • 2 layers160 × 100 mmEXPANDER, the printed circuit board in 3D

    EXPANDER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    77 partsMIT

Similar boards

  • 2 layers50 × 50 mmBasstortr bass distortion, the printed circuit board in 3D

    Basstortr bass distortion

    MarkGJ1/bass-distortion-pcb

    Custom-made PCB using KiCad for a bass distortion pedal effect

    51 parts
  • 2 layers41.4 × 47.5 mmU2f zero panel, the printed circuit board in 3D

    U2f zero panel

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    52 parts2.4k
  • 2 layers136 × 130 mmLora nodemcu, the printed circuit board in 3D

    Lora nodemcu

    sudomesh/disaster-radio

    A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

    52 parts1.1k
  • 2 layers69 × 53.8 mmTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    52 parts530
  • 2 layers52.5 × 36.6 mmESP8266-WebRadio, the printed circuit board in 3D

    ESP8266-WebRadio

    karawin/Ka-Radio

    A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

    52 parts453
  • 2 layers105.2 × 42.4 mmRWR CONTROL PANEL, the printed circuit board in 3D

    RWR CONTROL PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    52 parts431
  • 2 layers45 × 45 mmAirCube, the printed circuit board in 3D

    AirCube

    StuckAtPrototype/AirCube

    Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

    52 parts379Apache-2.0
  • 2 layers160 × 99.1 mmArdumower mega shield V1.00, the printed circuit board in 3D

    Ardumower mega shield V1.00

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    52 parts282

Questions

How big is the CALIBRATOR PCB?

It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CALIBRATOR use?

52 parts, built around the 1N5239B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CALIBRATOR KiCad files?

From the Desval27/FormantKO repository on GitHub, at the commit this page was made from: the board is MFOS/modules/CALIBRATOR/CALIBRATOR.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CALIBRATOR design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).