Skip to the content
2 layers428.6 × 130.2 mmBACKPLANE A, the printed circuit board in 3D

Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Size
428.6 × 130.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
75
Nets
413
Pads
939
Tracks, vias
1,516, 5
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 May 2026
Updated
28 Aug 2026

Overview

BACKPLANE A is an open-source printed circuit board by Desval27, from the Desval27/FormantKO repository on GitHub, published under the MIT licence. It is a 2-layer board of 428.6 × 130.2 mm with 75 parts on 413 nets, routed with 1,516 tracks and 5 vias.

Its parts include 21 connectors, 18 capacitors, 3 resistors and 3 diodes. It belongs with the audio and music boards of this library.

README

MFOS/panels/ANALOG/README.md

ANALOG

CV-16

Format: 6U

Status

⚠️ Incomplete⚠️

Documents

Gerber to Order

⚠️ Untested⚠️

Images

Rendered Panel Front

Rendered Panel Back

Parts

75
QtyValueFootprintReferences
26Mounting_HoleFormantKO:MountingHole_2.7mm_M2.5H1, H2, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23 +10
9100nFormantKO:C_Rect_200C10, C11, C12, C13, C14, C15, C16, C17, C18
6100µCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC2, C4, C6, C7, C8, C9
347µCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC1, C3, C5
3LEDLED_THT:LED_D5.0mmD1, D2, D3
2680RFormantKO:R_Axial_HorizontalR1, R3
1150RFormantKO:R_Axial_HorizontalR2
1BUS CONNECTOR INConnector_IDC:IDC-Header_2x10_P2.54mm_VerticalJ16
1BUS CONNECTOR OUTConnector_IDC:IDC-Header_2x10_P2.54mm_VerticalJ17
1GATE1FormantKO:Wire_1x01_GeneralJ19
1GATE1FormantKO:Jumper_1x02JP2
1GATE2FormantKO:Jumper_1x02JP4
1GATE2FormantKO:Wire_1x01_GeneralJ21
1KBINTFFormantKO:Molex_Mini-Fit_Jr_2x02_HorizontalJ15
1KOV1FormantKO:Wire_1x01_GeneralJ18
1KOV1FormantKO:Jumper_1x02JP1
1KOV2FormantKO:Wire_1x01_GeneralJ20
1KOV2FormantKO:Jumper_1x02JP3
1POWER INFormantKO:BusPowerConnectorJ14
1POWER OUTFormantKO:BusPowerConnectorJ13
1SLOT 1AFormantKO:BusConnectorJ1
1SLOT 1BFormantKO:BusConnectorJ7
1SLOT 2AFormantKO:BusConnectorJ2
1SLOT 2BFormantKO:BusConnectorJ8
1SLOT 3AFormantKO:BusConnectorJ3
1SLOT 3BFormantKO:BusConnectorJ9
1SLOT 4AFormantKO:BusConnectorJ4
1SLOT 4BFormantKO:BusConnectorJ10
1SLOT 5AFormantKO:BusConnectorJ5
1SLOT 5BFormantKO:BusConnectorJ11
1SLOT 6AFormantKO:BusConnectorJ6
1SLOT 6BFormantKO:BusConnectorJ12

More from Desval27/FormantKO

12
  • 2 layers160 × 100 mmCLOCK, the printed circuit board in 3D

    CLOCK

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    135 partsMIT
  • 2 layers160 × 233.4 mmVCO, the printed circuit board in 3D

    VCO

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    129 partsMIT
  • 2 layers160 × 233.4 mmVCF 24, the printed circuit board in 3D

    VCF 24

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    112 partsMIT
  • 2 layers160 × 100 mmDELAYED MOD, the printed circuit board in 3D

    DELAYED MOD

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    101 partsMIT
  • 2 layers160 × 100 mmANALOG, the printed circuit board in 3D

    ANALOG

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    96 partsMIT
  • 2 layers160 × 100 mmLFOs, the printed circuit board in 3D

    LFOs

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    94 partsMIT
  • 2 layers160 × 233.4 mmRFM, the printed circuit board in 3D

    RFM

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    93 partsMIT
  • 2 layers160 × 100 mmVC LFOs, the printed circuit board in 3D

    VC LFOs

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    92 partsMIT
  • 2 layers160 × 100 mmCOM, the printed circuit board in 3D

    COM

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    85 partsMIT
  • 2 layers160 × 100 mmADSR, the printed circuit board in 3D

    ADSR

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    82 partsMIT
  • 2 layers160 × 100 mmPHASE SHIFTER, the printed circuit board in 3D

    PHASE SHIFTER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    79 partsMIT
  • 2 layers160 × 100 mmEXPANDER, the printed circuit board in 3D

    EXPANDER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    77 partsMIT

Similar boards

  • 2 layers105.4 × 215.6 mmMIDI Sax, the printed circuit board in 3D

    MIDI Sax

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    75 parts915
  • 2 layers74.4 × 101.1 mmVoron badge, the printed circuit board in 3D

    Voron badge

    tanaes/whopping_Voron_mods

    75 parts787GPL-3.0
  • 2 layers80 × 129.1 mmSmart Plant, the printed circuit board in 3D

    Smart Plant

    JGAguado/Smart_Plant

    The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

    75 parts303
  • 2 layers40.1 × 107.1 mmLogiverter, the printed circuit board in 3D

    Logiverter

    nickajeglin/Eurorack-pcbs

    A collection of easy to solder DIY eurorack PCB's

    75 parts208
  • 2 layers85.1 × 62.2 mmMic extension board, the printed circuit board in 3D

    Mic extension board

    StoneRose35/cortexguitarfx

    guitar effects processor implemented on various arm cortex platforms

    75 parts146
  • 2 layers134 × 96 mmSgkb, the printed circuit board in 3D

    Sgkb

    sago35/tinygo-keyboard

    USB HID keyboard firmware for tinygo

    75 parts119MIT
  • 2 layers50 × 33.5 mmPolyspecusb, the printed circuit board in 3D

    Polyspecusb

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    75 parts114
  • 2 layers50 × 100 mmOvercurrent, the printed circuit board in 3D

    Overcurrent

    thebiguno/microcontroller-projects

    A home for a bunch of microcontroller projects which don't warrant their own repos.

    75 parts75

Questions

How big is the BACKPLANE A PCB?

It measures 428.6 × 130.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BACKPLANE A use?

75 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BACKPLANE A KiCad files?

From the Desval27/FormantKO repository on GitHub, at the commit this page was made from: the board is system/BACKPLANE_A/BACKPLANE_A.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the BACKPLANE A design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).