4 layers38.4 × 128.5 mm
2 layers14 × 14.1 mm
Bme688Breakout
Destination-SPACE/BME680-Breakout1BME680/688 Breakout Board KiCad files
- Size
- 14 × 14.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 6
- Pads
- 34
- Tracks, vias
- 82, 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Sep 2021
- Updated
- 28 Nov 2021
Overview
Bme688Breakout is an open-source printed circuit board by Destination-SPACE, from the Destination-SPACE/BME680-Breakout repository on GitHub. It is a 2-layer board of 14 × 14.1 mm with 11 parts on 6 nets, routed with 82 tracks and 7 vias.
It is built around the BME688. Its parts include 4 resistors, 3 connectors, 2 capacitors and 1 IC.
Main components
1README
README.mdBME680-Breakout
This breakout board is for the Bosch BME680/688 low power gas, pressure, tempreture, and humidity sensor. This board has a default I2C address of 0x77 and is 3.3V only.
Requires symbols and footprints from DS Global Library
Licnese
Licensed under the CERN OHLv2 - Permissive or as referenced.
(c) Destination SPACE Inc. 2021
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 477k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | Castellated_Conn_01x01 | DS-connectors:Castellated_PinHeader_01x01_P2.54mm_Vertical | J2, J3 |
| 1 | BME688 | DS-sensors:Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering | U1 |
| 1 | Castellated_Conn_01x04 | DS-connectors:Castellated_PinHeader_01x04_P2.54mm_Vertical | J1 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
Questions
How big is the Bme688Breakout PCB?
It measures 14 × 14.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bme688Breakout use?
11 parts, built around the BME688. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bme688Breakout KiCad files?
From the Destination-SPACE/BME680-Breakout repository on GitHub, at the commit this page was made from: the board is CAD-files/bme688Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bme688Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask Destination-SPACE before reusing the design.
Similar boards
- 2 layers36.8 × 90.9 mm
Bwlr1e
teapotlaboratories/bwlr1e
Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy
65 parts36MIT - 2 layers32 × 29 mm
- 4 layers92.5 × 101.6 mm
- 4 layers150 × 168 mm
Soldered Inkplate 4 TEMPERA with glass panel panel
SolderedElectronics/Soldered-Inkplate-4-TEMPERA-with-glass-panel-hardware-design
Inkplate 4 TEMPERA is an easy-to-use, all-in-one device that puts the power of e-paper technology in the palm of your hand.
1,348 parts5 - 2 layers185.9 × 120 mm
KwartzLab SensorBoard Rev3-Panel
kwartzlab/Environmental-Sensor
The source for the environmental sensors used at Kwartzlab
200 parts3 - 2 layers50 × 45.3 mm
Tempic HW
jernej13/Tempic
Small solarpowered ESP32 based indoor/outdoor wifi weather station.
61 parts2MIT - 2 layers85 × 90 mm
Schematics
LyubomirNachev/Diplomna
Проектиране на сензорна IoT мрежа, използваща протокола Thread.
20 parts2