Skip to the content
2 layers30.5 × 66 mmTrafficlights, the printed circuit board in 3D

Trafficlights

despencer/stm32

Some experimental and demo stuff for STM32 programming

Size
30.5 × 66 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
11
Pads
26
Tracks, vias
33, 14
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
15 Dec 2022
Updated
16 Mar 2026

Overview

Trafficlights is an open-source printed circuit board by despencer, from the despencer/stm32 repository on GitHub, published under the MIT licence. It is a 2-layer board of 30.5 × 66 mm with 14 parts on 11 nets, routed with 33 tracks and 14 vias.

Its parts include 3 resistors, 3 diodes and 3 transistors. It belongs with the STM32 boards of this library.

README

README.md

stm32

Some experimental and demo stuff for STM32 programming

Building projects

mkdir build/

cd buid/

cmake -DBOARD=

make

Parts

14
QtyValueFootprintReferences
32N7000Package_TO_SOT_THT:TO-92_Inline_WideQ1, Q2, Q3
3330Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_HorizontalR1, R2, R3
1GNDConnector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mmTP12
1GREENConnector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mmTP3
1GREENLED_THT:LED_D5.0mmD3
1REDLED_THT:LED_D5.0mmD1
1REDConnector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mmTP1
1VCCConnector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mmTP11
1YELLOWLED_THT:LED_D5.0mmD2
1YELLOWConnector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mmTP2

More from despencer/stm32

1
  • 2 layers81.3 × 17.8 mmFrsky invertor, the printed circuit board in 3D

    Frsky invertor

    despencer/stm32

    Some experimental and demo stuff for STM32 programming

    10 partsMIT

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Trafficlights PCB?

It measures 30.5 × 66 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Trafficlights use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Trafficlights KiCad files?

From the despencer/stm32 repository on GitHub, at the commit this page was made from: the board is hardware/trafficlights/trafficlights.kicad_pcb and its schematic hardware/frsky-invertor/frsky-invertor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Trafficlights design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).