2 layers14 × 100 mm
Powerline USB C
Andreas-Dorfner/Powerline-USB-C
Powerline is a small 3HP Front Entry USB-C eurorack power supply.
22 parts16
4 layers16 × 23.6 mm
OpenWifiDecoder
derGraph/openWifiDecoder- Size
- 16 × 23.6 mm
- Copper layers
- 4
- Thickness
- 1.02 mm
- Parts
- 64
- Nets
- 79
- Pads
- 279
- Tracks, vias
- 465, 88
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Nov 2024
- Updated
- 2 Jun 2025
Overview
OpenWifiDecoder is an open-source printed circuit board by derGraph, from the derGraph/openWifiDecoder repository on GitHub. It is a 4-layer board of 16 × 23.6 mm with 64 parts on 79 nets, routed with 465 tracks and 88 vias.
It is built around the ESP32-S3-MINI-1-N8, BQ27441DRZT-G1A and ICM-20948, with the LTC4054ES5-4.2#PBF, MIC5219-3.3YM5 and MC-802YC-H105 among its other parts. Its parts include 15 capacitors, 14 resistors, 8 ICs and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
6
ESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi Modules
BQ27441DRZT-G1A
SON-12-EP(2.5x4)-40℃~+85℃ 1 2.45V~4.5V 600nA I2C Lithium Battery Monitoring IC Not supported SON-12-EP(2.5x4) Battery Management ROHSTexas InstrumentsBattery Management
ICM-20948
QFN-24(3x3)-40℃~+85℃ 0.5KB 1.71V~3.6V 16bit 8uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24(3x3) Accelerometers ROHSTDK InvenSenseAccelerometers
LTC4054ES5-4.2#PBF
SOT-23-5-40℃~+85℃ 1 200uA 4.25V~6.5V 4.2V 800mA Charging IC Lithium Battery Not supported Not supported SOT-23-5 Battery Management ROHSAnalog DevicesBattery ManagementMIC5219-3.3YM5
SOT23-53.3V 500mA Peak Output Low Drop-Out (LDO) RegulatorMicrochip TechnologyUncategorised
MC-802YC-H105
插件-40℃~+85℃ 1 10,000 cycles 10.5mm 14P 5A Female Through Hole Type-C USB 3.1 插件 USB Connectors ROHSHanbo ElectronicUSB Connectors
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | Conn_01x01_Socket | padLib:SolderPad_1mm_1Pin | IO4, IO5, IO6, IO9, IO10, IO11, IO12, IO13, IO14, IO15, IO16, IO17, IO18, IO19, RX0, TX0 |
| 6 | .1uF X7R | Capacitor_SMD:C_0402_1005Metric | C1, C3, C6, C7, C8, C11 |
| 6 | 1uF X7R | Capacitor_SMD:C_0402_1005Metric | C4, C5, C10, C12, C13, C15 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R6, R14 |
| 3 | 5k1 | Resistor_SMD:R_0402_1005Metric | R9, R10, R11 |
| 2 | 1 | padLib:SolderPad_1mm_1Pin | IO1, IO8 |
| 2 | 2 | padLib:SolderPad_1mm_1Pin | IO2, IO7 |
| 2 | 270 | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 1 | 1.8M | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 10m 1% 0.07W | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 22uF X7R | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 2k 1% | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 3 | padLib:SolderPad_1mm_1Pin | IO3 |
| 1 | 470n | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 680n | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | 6k8 | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | BQ27441DRZT-G1A | Package_SON:Texas_S-PDSO-N12 | U7 |
| 1 | Battery | padLib:SolderPad_1mm_2Pin | BAT1 |
| 1 | DRV8212DRLR | SamacSys_Parts:SOTFL50P160X60-6N | IC1 |
| 1 | ESP32-S3-MINI-1 | RF_Module:ESP32-S2-MINI-1 | U3 |
| 1 | FLASH | easyeda2kicad:SW-SMD_4P-L2.6-W1.6-P0.75-LS3.0 | FLASH1 |
| 1 | Hall | padLib:SolderPad_1mm_3Pin | J24 |
| 1 | ICM-20948 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U4 |
| 1 | LTC4054ES5-4.2 | Package_TO_SOT_SMD:TSOT-23-5 | U5 |
| 1 | MC-802YC-H105 | easyeda2kicad:USB-TH_MC-802YC-H105 | USB1 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | MIC5317-1.8xM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Motor | padLib:SolderPad_1mm_2Pin | J1 |
| 1 | RESET | easyeda2kicad:SW-SMD_4P-L2.6-W1.6-P0.75-LS3.0 | RESET1 |
| 1 | TL331 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | USB_PU | Resistor_SMD:R_0402_1005Metric | R3 |
Questions
How big is the OpenWifiDecoder PCB?
It measures 16 × 23.6 mm and has 4 copper layers, 1.02 mm thick.
What parts does the OpenWifiDecoder use?
64 parts, built around the ESP32-S3-MINI-1-N8, BQ27441DRZT-G1A, ICM-20948 and LTC4054ES5-4.2#PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OpenWifiDecoder KiCad files?
From the derGraph/openWifiDecoder repository on GitHub, at the commit this page was made from: the board is openWifiDecoder.kicad_pcb and its schematic openWifiDecoder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OpenWifiDecoder design in my own project?
Its repository states no licence, so its author keeps all rights: ask derGraph before reusing the design.
Similar boards
- 4 layers92.5 × 70.4 mm
- 2 layers155 × 60 mm
- 2 layers22.5 × 110.8 mm
- 8 layers100 × 100 mm
- 4 layers98.5 × 193.5 mm
- 4 layers58 × 104 mm
- 4 layers82 × 54.2 mm
Secure edge logger
landjas09/Secure-Ready-Battery-Powered-Edge-Logger
Custom ESP32-C3 Secure-Ready Battery-Powered Edge Logger with environmental, light and acoustic sensing, local storage, DS3231 RTC, BQ27441 fuel gauging, SE050E2 secure element and TPS63802 buck-boost power.
109 parts