

KediSavar
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 100
- Pads
- 297
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 Aug 2026
- Updated
- 15 Sep 2026
Overview
KediSavar is an open-source printed circuit board by derdds, from the derdds/Esit-Internship repository on GitHub. It is a 2-layer board of 100 × 100 mm with 76 parts on 100 nets.
It is built around the ULN2003A, AO3400A and SS14. Its parts include 40 resistors, 17 capacitors, 4 ICs, 3 diodes and 3 transistors.
Main components
3ULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R8, R9, R10, R11, R12, R13, R14, R15, R17, R32, R40 |
| 12 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R26, R27, R28, R29, R30, R33, R34, R35, R36, R37, R38 |
| 7 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12, C13, C14, C15, C16, C17 |
| 7 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19, R20, R21, R22, R23, R24 |
| 3 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R31, R39 |
| 3 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | SS14 | Diode_SMD:D_3220_8050Metric_Pad2.65x5.15mm_HandSolder | D1, D2, D3 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C8 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7 |
| 2 | 10uF / 35-50v | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C6 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R7 |
| 2 | 22uF / 25v | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C10 |
| 2 | 22uH | Can foot:L_12x12mm_H8mm | L1, L2 |
| 2 | 3.3nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C9 |
| 2 | 44.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R6 |
| 2 | TS3552CS | Can foot:SOP-8_3.76x4.96mm_P1.27mm | U1, U2 |
| 2 | ULN2003A | Can foot:SOIC-16_3.9x9.9mm_P1.27mm | U3, U4 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | Screw_Terminal_01x10 | Can foot:wago 256 410 | J1 |
| 1 | ~ | Can foot:ESP32 25.4mm | A1 |
The 72 most common of 76 parts.
More from derdds/Esit-Internship
5- 2 layers100 × 100 mm

- 2 layers70 × 100 mm

- 4 layers44 × 12.9 mm

- 2 layers40 × 50 mm

- 4 layers

Similar boards
- 2 layers100 × 99.8 mm

Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
166 parts19 - 2 layers

- 2 layers100 × 100 mm

PCB SALUS v3
LeoSole423/PCB_SALUS_V3
PCB de control para el robot Ackermann SALUS. Esta revision se inspira en la arquitectura de Hoja-Base, pero usa un ESP32-S3 y se mantiene como un diseno independiente.
91 parts - 2 layers100 × 70 mm

- 2 layers236.7 × 149.7 mm

ControllinoA
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
265 parts4 - 4 layers100 × 100 mm

- 4 layers100 × 100 mm

- 4 layers285.1 × 48.1 mm

Ayab esp32
AllYarnsAreBeautiful/ayab-hardware
Contains the schematics and layouts for the AYAB Arduino shield
246 parts50CC-BY-SA-4.0
Questions
How big is the KediSavar PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KediSavar use?
76 parts, built around the ULN2003A, AO3400A and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KediSavar KiCad files?
From the derdds/Esit-Internship repository on GitHub, at the commit this page was made from: the board is 03.08.26 Evening/Active Projects/Kedi Savar/Electrical/KediSavar/.history/KediSavar.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the KediSavar design in my own project?
Its repository states no licence, so its author keeps all rights: ask derdds before reusing the design.