Skip to the content
2 layers100 × 100 mmKediSavar, the printed circuit board in 3D
Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
101
Nets
108
Pads
331
Tracks, vias
685, 57
Pours
34
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
4 Aug 2026
Updated
15 Sep 2026

Overview

KediSavar is an open-source printed circuit board by derdds, from the derdds/Esit-Internship repository on GitHub. It is a 2-layer board of 100 × 100 mm with 101 parts on 108 nets, routed with 685 tracks and 57 vias.

It is built around the ULN2003A, SS14 and AO3400A. Its parts include 44 resistors, 19 capacitors, 7 diodes, 5 ICs and 3 transistors.

Main components

3

Parts

101
QtyValueFootprintReferences
14330Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R43, R44
1310kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R3, R5, R7, R9, R11, R13, R29, R30, R31, R32, R33, R35
81kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R4, R6, R8, R10, R12, R14, R42
7100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4, C5, C6, C7
410uF / 35-50vCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC14, C15, C16, C18
4SS14Diode_SMD:D_3220_8050Metric_Pad2.65x5.15mm_HandSolderD1, D2, D3, D4
4TestPointTestPoint:TestPoint_Pad_1.5x1.5mmBATT, GND, PWR, uC
3220Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR36, R37, R38
3AO3400APackage_TO_SOT_SMD:SOT-23Q1, Q2, Q3
3LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD5, D6, D7
20.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC10, C12
210nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC17, C19
22.2kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR39, R40
222uF / 25vCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC8, C9
222uHCan foot:L_12x12mm_H8mmL1, L2
23.3nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC11, C13
244.2kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR28, R34
2TS3552CSCan foot:SOP-8_3.76x4.96mm_P1.27mmU4, U5
2ULN2003ACan foot:SOIC-16_3.9x9.9mm_P1.27mmU1, U2
1100kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR41
1470Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR27
1AQY212GZSPackage_SO:SO-4_4.4x4.3mm_P2.54mmU3
1Conn_02x20_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ1
1Screw_Terminal_01x10Can foot:Wago 256 410J2
1~Can foot:ESP32 25.4mmA1

The 87 most common of 101 parts.

More from derdds/Esit-Internship

5
  • 2 layers100 × 100 mmKediSavar, the printed circuit board in 3D

    KediSavar

    derdds/Esit-Internship

    76 parts
  • 4 layers44 × 12.9 mmBike PWR2, the printed circuit board in 3D

    Bike PWR2

    derdds/Esit-Internship

    53 parts
  • 2 layers40 × 50 mmOIS L, the printed circuit board in 3D

    OIS L

    derdds/Esit-Internship

    34 parts
  • 4 layersBike PWR, the printed circuit board in 3D

    Bike PWR

    derdds/Esit-Internship

    26 parts

Similar boards

  • 2 layers100 × 99.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    166 parts19
  • 2 layersSmartRV AIO SMD, the printed circuit board in 3D

    SmartRV AIO SMD

    RoBro92/SmartRV-AIO

    An all in one RV/Campervan automation board.

    56 parts4AGPL-3.0
  • 2 layers100 × 100 mmPCB SALUS v3, the printed circuit board in 3D

    PCB SALUS v3

    LeoSole423/PCB_SALUS_V3

    PCB de control para el robot Ackermann SALUS. Esta revision se inspira en la arquitectura de Hoja-Base, pero usa un ESP32-S3 y se mantiene como un diseno independiente.

    91 parts
  • 2 layers100 × 70 mmUPSMonitorModule, the printed circuit board in 3D

    UPSMonitorModule

    enriquewph/esp-map

    Modular hardware for IoT & home automation

    76 parts4MIT
  • 2 layers236.7 × 149.7 mmControllinoA, the printed circuit board in 3D

    ControllinoA

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    265 parts4
  • 4 layers100 × 100 mmEc30-tee, the printed circuit board in 3D

    Ec30-tee

    justinpirie/ec30

    Onan EC30 Tee Board with ESP32 Control

    130 partsApache-2.0
  • 4 layers100 × 100 mmInputSwitch, the printed circuit board in 3D

    InputSwitch

    smileym4n-collab/Kicadprojects

    109 parts
  • 4 layers285.1 × 48.1 mmAyab esp32, the printed circuit board in 3D

    Ayab esp32

    AllYarnsAreBeautiful/ayab-hardware

    Contains the schematics and layouts for the AYAB Arduino shield

    246 parts50CC-BY-SA-4.0

Questions

How big is the KediSavar PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KediSavar use?

101 parts, built around the ULN2003A, SS14 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KediSavar KiCad files?

From the derdds/Esit-Internship repository on GitHub, at the commit this page was made from: the board is Active_Projects/Kedi Savar/Electrical/KediSavar/KediSavar.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the KediSavar design in my own project?

Its repository states no licence, so its author keeps all rights: ask derdds before reusing the design.