

N23 CurrentSource
Hardware and software for the Philips PM2528
- Size
- 100 × 64 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 54
- Pads
- 170
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Aug 2025
- Updated
- 7 Nov 2026
Overview
N23 CurrentSource is an open-source printed circuit board by deqit, from the deqit/PhilipsPM2528 repository on GitHub. It is a 2-layer board of 100 × 64 mm with 66 parts on 54 nets.
It is built around the BC337 and BC557B. Its parts include 33 resistors, 7 switches, 5 capacitors and 1 crystal.
Main components
2README
README.mdReviving a Philips PM2528 Digital Multimeter
Picked up this vintage multimeter a while back. Half-functional, no manuals, and full of mystery. Perfect!
It’s built around an Intel 8035 microcontroller and packed with analog boards. There wasn’t a complete service manual anywhere, so I decided to dive in myself. This project's become a learning experience in hardware reverse engineering, firmware disassembly, and documentation.
Also see https://hackaday.io/project/203720-reviving-a-philips-pm2528-digital-multimeter
The project
The goal of this project is fixing the multimeter. Well... maybe not really. In real life, the road towards that goal is much more interesting. And I'm documenting everything I found along the way.
In this repository you'll find:
- Original Philips-documentation (at least, what I could find, unfortunately in lo-res)
- Schematics (KiCad)
- PCB Layouts (KiCad)
- Schematic/PCB of a risercard, for testing the expansionboards
- Disassembled firmware, including annotations (Ghidra)
- A lot of documentation regarding relais-mapping, IO-expander-ports, etc.
- Detailed scope- and logic analyzer screenprints and capture-logs
- Deepdive: Explaination of how-everything-works
- etc.
Everything you find here is work-in-progress. It might be incomplete, and some parts may not be 100% accurate yet. If you spot something interesting or catch an error, feel free to drop me a message.
The components
Overview
- See PM2528 Overview
Risercard
- See PM2528 Risercard
ADC
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | BAX12A | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | V2302, V2303, V2304, V2305, V2306, V2307, V2308 |
| 7 | ~ | PM2528:Reed relay assy | K2301, K2302, K2303, K2304, K2305, K2306, K2307 |
| 3 | ~ | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | TP2303, TP2304, TP2305 |
| 2 | 200 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2322, R2323 |
| 2 | 499k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2332, R2333 |
| 2 | 4u7 | Capacitor_THT:CP_Radial_Tantal_D4.5mm_P5.00mm | C2301, C2302 |
| 1 | 100 | Varistor:RV_Disc_D7mm_W3.9mm_P5mm | R2325 |
| 1 | 100k | PM2528:Trimmer vertical | R2328 |
| 1 | 100p | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2303 |
| 1 | 1K5 | PM2528:Trimmer vertical | R2304 |
| 1 | 1n33 | Capacitor_THT:C_Axial_L5.1mm_D3.1mm_P15.00mm_Horizontal | C2305 |
| 1 | 200k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2305 |
| 1 | 200k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2303 |
| 1 | 200Ω | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | TP2301 |
| 1 | 215 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2312 |
| 1 | 21R5 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2316 |
| 1 | 220 | PM2528:Trimmer vertical | R2317 |
| 1 | 22k | PM2528:Trimmer vertical | R2309 |
| 1 | 28 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2318 |
| 1 | 280 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2314 |
| 1 | 2R15 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2320 |
| 1 | 2k15 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2308 |
| 1 | 2k2 | PM2528:Trimmer vertical | R2313 |
| 1 | 2k8 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2310 |
| 1 | 33 | PM2528:Trimmer vertical | R2321 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0614_L14.3mm_D5.7mm_P25.40mm_Horizontal | R2324 |
| 1 | 33p | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2304 |
| 1 | 357k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2311 |
| 1 | 35k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2315 |
| 1 | 38k3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2307 |
| 1 | 3R32 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2327 |
| 1 | 3k57 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2319 |
| 1 | 402k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2306 |
| 1 | 487 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2302 |
| 1 | 487 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2301 |
| 1 | 4k7 | PM2528:Trimmer vertical | R2331 |
| 1 | 898 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2326 |
| 1 | 8M89 | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R2330 |
| 1 | 97k6 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2329 |
| 1 | A | TestPoint:TestPoint_Bridge_Pitch5.08mm_Drill0.7mm | JP2302 |
| 1 | B | TestPoint:TestPoint_Bridge_Pitch5.08mm_Drill0.7mm | JP2301 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92 | V2309 |
| 1 | BC557B | Package_TO_SOT_THT:TO-92 | V2301 |
| 1 | Iout | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | TP2308 |
| 1 | LM208AH | Package_TO_SOT_THT:TO-99-8 | A2301 |
| 1 | MeasZero | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | TP2302 |
| 1 | N2157 | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | TP2306 |
| 1 | Vref | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | TP2307 |
| 1 | ~ | PM2528:PM2528_RiserCardConnector | X2301 |
More from deqit/PhilipsPM2528
8- 2 layers101.5 × 63 mm

- 2 layers100.5 × 66.5 mm

- 2 layers100.5 × 64.5 mm

- 2 layers101.1 × 62.6 mm

- 2 layers98.3 × 65.8 mm

- 2 layers116.5 × 105 mm

- 2 layers95.8 × 62.8 mm

- 2 layers96.5 × 62 mm

Similar boards
- 2 layers300 × 53 mm

BMW E30 VFL SI Board
FabianGmeiner/BMW_E30_SI_Board
Reverse engineering and improving the BMW E30 service indicator board
112 parts20GPL-3.0 - 2 layers283 × 177.5 mm

UC-50-001
sporniket/kicad-conversions--thomson-mo5--v1
A conversion to Kicad EDA of the schematics of a computer released around 1984 known as the "Thomson MO5".
225 parts7CC0-1.0 - 2 layers300 × 53 mm

BMW E30 Late Cluster SI
Ansel84/BMW-E30-Gauge-Cluster-Late-Model
This project is the documentation of reverse engineering the BMW E30 gauge cluster for post 1988 model years.
118 parts2MIT - 2 layers108 × 48.3 mm

- 2 layers89.2 × 62.1 mm

Dce pcb v1
DeniseViltes/dce-g5-proyecto_integrador
FIUBA - Electrónica - Taller de Diseño de Circuitos Electrónicos -Proyecto de diseño: Sistema de alimentación para aplicaciones industriales y automotrices
59 parts1 - 2 layers73 × 78.1 mm

Pan Mix A
clarionut/YuSynth-Panning-Mixer-Output
An extensible version of the YuSynth Output mixer & VC-panner, minus the tone control circuitry
98 parts - 2 layers71.9 × 100 mm

Vco
cookiemonsternz/Eurorack-VCO
Also, a lot of eurorack modules are quite bland in terms of design, often lacking any personality and focusing purely on cramming as many knobs in as possible.
115 parts - 2 layers91.4 × 94 mm

Simple electronic load
johnysmrz/ElectronicLoad
Yet another simple electronic load with a flair.
48 parts
Questions
How big is the N23 CurrentSource PCB?
It measures 100 × 64 mm and has 2 copper layers, 1.6 mm thick.
What parts does the N23 CurrentSource use?
66 parts, built around the BC337 and BC557B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the N23 CurrentSource KiCad files?
From the deqit/PhilipsPM2528 repository on GitHub, at the commit this page was made from: the board is Schematics/Expensionboards/N23_CurrentSource/N23_CurrentSource.kicad_pcb and its schematic Schematics/Expensionboards/N20_ADCControl/N20_ADCControl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the N23 CurrentSource design in my own project?
Its repository states no licence, so its author keeps all rights: ask deqit before reusing the design.