
PETER
dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.
SPIFEE is an open-source printed circuit board by dennowiggle, from the dennowiggle/Retro-PETER repository on GitHub, published under the LGPL-2.1 licence. It is a 4-layer board of 101.6 × 49.9 mm with 74 parts on 109 nets, routed with 1,036 tracks and 278 vias.
It is built around the MC68SEC000FU20, 74LVC2G07GW,125-JSM and 74LVC2G34GW,125, with the SST39LF040-55-4C-NHE, 74LVC3G06DC and DS1086LU+ among its other parts. Its parts include 37 resistors, 16 capacitors, 6 ICs, 5 diodes and 3 connectors.
Z8S180 On RCBUS Only.
ZORO is an RCBUS board with a Z180 CPU. There is no RAM or ROM memory hosted on the board.


The 'output' directory contains the BOM, netlist, and PDF schematic.
Board design used KiCad 8.0.4.
Change J2 to Adam Tech part number PH2RA-80-UA to reduce insertion force.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 10K | Resistor_SMD:R_0603_1608Metric | R301, R302, R303, R304, R305, R306, R307, R308, R309, R310, R311, R312, R313, R314, R315, R316 +7 |
| 11 | 100nF | Capacitor_SMD:C_0603_1608Metric | C201, C202, C301, C304, C305, C307, C308, C309, C310, C311, C312 |
| 6 | 1K00 | Resistor_SMD:R_0603_1608Metric | R203, R326, R327, R328, R329, R330 |
| 5 | 0R | Resistor_SMD:R_0603_1608Metric | R202, R205, R206, R207, R208 |
| 5 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C203, C204, C302, C303, C306 |
| 5 | LED_LTST-S270KGKT | WTM_Library:LTST-S270KGKT | D301, D302, D303, D304, D305 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H2, H3, H4, H5 |
| 3 | 33R | Resistor_SMD:R_0603_1608Metric | R201, R324, R325 |
| 2 | Conn_02x03 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J202, J301 |
| 2 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_7.5x8mm_SilkScreen | LOGO1, LOGO2 |
| 1 | 74LVC2G07 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U303 |
| 1 | 74LVC2G34 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U201 |
| 1 | 74LVC3G06 | WTM_Library:SSOP-8_2.95x2.8mm_P0.65mm | U304 |
| 1 | Conn_02x40_Top_Bottom | WTM_Library:RCBUS_PinHeader_2x40_P2.54mm_Horizontal | J201 |
| 1 | DS1086LU+ | Package_SO:MSOP-8_3x3mm_P0.65mm | U301 |
| 1 | MC68SEC000FU | Package_QFP:PQFP-64_14x14mm_P0.8mm | U302 |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1 |
| 1 | SST39SF040-55 | WTM_Library:PLCC32_SMT_SOCKET_AMPHENOL_69802-132LF | U305 |

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

JamPsym/letki
A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

aliaksei-lameyka/ENKU-Base-reader
Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.

ngrabbs/ember
Open pvpanel.kicadpro with KiCad 10. The project contains the recovered schematic, routed PCB, project-local footprint libraries, and solar-module STEP model.

saikhamhein/benchswitch-usb-dut-hub
BenchSwitch USB DUT Hub: a four-port USB 2.0 hardware development prototype with KiCad design sources, BOM, manufacturing files, and bring-up documentation.

magnus188/aegir
Open-source ESP32-P4 trimix analyzer prototype for technical diving,


It measures 101.6 × 49.9 mm and has 4 copper layers, 1.6 mm thick.
74 parts, built around the MC68SEC000FU20, 74LVC2G07GW,125-JSM, 74LVC2G34GW,125 and SST39LF040-55-4C-NHE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dennowiggle/Retro-PETER repository on GitHub, at the commit this page was made from: the board is Hardware/SPIFEE/SPIFEE.kicad_pcb and its schematic Hardware/Analyzer/Analyzer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).