4 layers90 × 65 mm
FlySensei Stack RPi ECAD
denjos007/FlySensei_Stack_ECAD
PCB Design for the Stacked design for Blimp Controller
95 parts
4 layers90 × 65 mm
FlySensei Stack Actuation ECAD
denjos007/FlySensei_Stack_ECADPCB Design for the Stacked design for Blimp Controller
- Size
- 90 × 65 mm
- Copper layers
- 4
- Thickness
- 1.18 mm
- Parts
- 122
- Nets
- 122
- Pads
- 613
- Tracks, vias
- 985, 434
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210606)
- Created
- 1 Jul 2021
- Updated
- 22 Jul 2021
Overview
FlySensei Stack Actuation ECAD is an open-source printed circuit board by denjos007, from the denjos007/FlySensei_Stack_ECAD repository on GitHub. It is a 4-layer board of 90 × 65 mm with 122 parts on 122 nets, routed with 985 tracks and 434 vias.
It is built around the PCA9685PW, TS5A3159ADCKR and MAX17049G+T10. Its parts include 35 capacitors, 18 resistors, 10 ICs, 5 connectors and 2 switches.
Main components
3
PCA9685PW
TSSOP-28-40℃~+85℃ 100kHz~1MHz 16 2.3V~5.5V 25mA 5.5V Built-in PWM TSSOP-28 LED Drivers ROHSNXP SemiconductorsLED Drivers
TS5A3159ADCKR
SC-70-6-40℃~+85℃ 1 1.65V~5.5V 100MHz 2:1 30ns 30ns 55pF 700mΩ SC-70-6 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
MAX17049G+T10
TDFN-8-EP(2x2)-40℃~+85℃ 2 2.5V~4.5V 23uA I2C Lithium Battery Monitoring IC Not supported Not supported TDFN-8-EP(2x2) Battery Management ROHSMaxim Integrated (Analog Devices)Battery Management
README
FlySensei_Stack_RPi_ECAD/README.mdStackable base board for the Raspberry Pi CM4 with an integrated AI co-processor
Functional Specifications
- Raspberry Pi CM4 used as the main processor
- Google Coral used as the AI co-processor
- Selectable Power input from USB-C port and Battery input from stack headers
- Ethernet and camera FFC ports
Contributors
Joseph Prince Mathew - jprincem@masonlive.gmu.edu
Parts
122| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18 +2 |
| 16 | Conn_01x03 | Connector_JST:JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal | BL0, BL1, BL2, BL3, BL4, BL5, BL6, BL7, S0, S1, S2, S3, S4, S5, S6, S7 |
| 12 | 0u1 | Capacitor_SMD:C_0402_1005Metric | C6, C7, C12, C13, C14, C15, C16, C17, C22, C23, C24, C25 |
| 12 | 1u | Capacitor_SMD:C_0402_1005Metric | C4, C5, C10, C11, C18, C19, C20, C21, C26, C27, C28, C29 |
| 11 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11 |
| 9 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7, R17, R18 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric | C2, C3, C8, C9, C31, C33 |
| 4 | DRV8835DSSR | Package_SON:WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65_ThermalVias | U2, U3, U4, U5 |
| 4 | JST_SH_SM02 | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | M0, M1, M2, M3 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C32, C34 |
| 2 | 55K | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | Conn_02x20_Odd_Even_Female | Connector_PinHeader_1.27mm:PinHeader_2x20_P1.27mm_Vertical_SMD | J2, J4 |
| 2 | Conn_02x20_Odd_Even_Male | Connector_PinHeader_1.27mm:PinHeader_2x20_P1.27mm_Vertical_SMD | J1, J3 |
| 2 | MPM3610 | Package_DFN_QFN_U:MPM3610_QFN-20_5x3mm | U6, U7 |
| 2 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1, SW2 |
| 2 | TS5A3159ADCKR | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U9, U10 |
| 2 | TestPoint | Pads:Pad_3x3mm | TP19, TP20 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 100u | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C30 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C35 |
| 1 | 19K1 | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 220R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 24K | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 62K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 73K2 | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 75K | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | JST_PH_SM2 | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J5 |
| 1 | MAX17049G+T10 | M_Battery-Management:MAX17049GT10 | U8 |
| 1 | PCA9685PW | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U1 |
| 1 | R_LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
More from denjos007/FlySensei_Stack_ECAD
3- 4 layers90 × 65 mm
FlySensei Stack Sensing ECAD
denjos007/FlySensei_Stack_ECAD
PCB Design for the Stacked design for Blimp Controller
49 parts - 4 layers90 × 65 mm
FlySensei Stack Template
denjos007/FlySensei_Stack_ECAD
PCB Design for the Stacked design for Blimp Controller
8 parts
Similar boards
- 4 layers68.6 × 53.3 mm
Arduino UNO R4 WiFi
sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
262 parts95WTFPL - 4 layers100 × 100 mm
- 4 layers68 × 73.5 mm
Messenger
nickzentmayer/Messenger
This is a repository of hardware and software for a SX1262 radio based messageing device I made. This device supports a messaging protocol named Hermes that I created with insperation from protocols like TCP.
91 parts1 - 2 layers220 × 329.2 mm
Control Boards
nasa-jpl/open-source-rover
A build-it-yourself, 6-wheel rover based on the rovers on Mars!
148 parts9.8kApache-2.0 - 4 layers100.1 × 60.2 mm
Hades
pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.
215 parts1kBSD-3-Clause - 2 layers94 × 79 mm
- 2 layers130 × 120 mm
- 2 layers54.2 × 75.2 mm
KiCAD Design
Brobiwann/ESP-spider
The ESP-Spider is a quadruped robot inspired by the miniKame (https://github.com/JavierIH/miniKame) . Like the miniKame, it uses sinusoidal functions to control servo positions, but the design and code were developed…
70 parts44
Questions
How big is the FlySensei Stack Actuation ECAD PCB?
It measures 90 × 65 mm and has 4 copper layers, 1.18 mm thick.
What parts does the FlySensei Stack Actuation ECAD use?
122 parts, built around the PCA9685PW, TS5A3159ADCKR and MAX17049G+T10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FlySensei Stack Actuation ECAD KiCad files?
From the denjos007/FlySensei_Stack_ECAD repository on GitHub, at the commit this page was made from: the board is FlySensei_Stack_Actuation_ECAD/FlySensei_Stack_Actuation_ECAD.kicad_pcb and its schematic FlySensei_Stack_Actuation_ECAD/FlySensei_Stack_Actuation_ECAD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FlySensei Stack Actuation ECAD design in my own project?
Its repository states no licence, so its author keeps all rights: ask denjos007 before reusing the design.