2 layers50.8 × 41.3 mm
MiniMicro
OrenBee/FlightControlBoard
A PCB capable of controlling motor controllers and running a stabilizing controller.
43 parts
4 layers351.8 × 100.3 mm
Stensgrind pcb
Deltaphish/stensgrindSplit keyboard based on Corne layout
- Size
- 351.8 × 100.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 186
- Nets
- 145
- Pads
- 748
- Tracks, vias
- 1,298, 122
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Feb 2026
- Updated
- 21 Feb 2026
Overview
Stensgrind pcb is an open-source printed circuit board by Deltaphish, from the Deltaphish/stensgrind repository on GitHub, published under the MIT licence. It is a 4-layer board of 351.8 × 100.3 mm with 186 parts on 145 nets, routed with 1,298 tracks and 122 vias.
It is built around the CAHCT1G125QDCKRQ1 and ISO1050DUB. Its parts include 52 ICs, 47 diodes, 46 switches, 11 resistors and 6 connectors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
CAHCT1G125QDCKRQ1
SC-70-5-40℃~+125℃ 1 1 10uA 3V~5.5V 7.5ns@5V,50pF 74AHCT 8mA 8mA Tri-State Unidirectional SC-70-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
ISO1050DUB
SOP-8-2.54mm-55℃~+105℃ 1 1Mbps 2500 3V~5.5V 4.75V~5.25V 50kV/us Bus fault detection and protection、Fail-safe SOP-8-2.54mm Isolated CAN Transceivers ROHSTexas InstrumentsIsolated CAN Transceivers
README
README.mdStensgrind
Split keyboard with Corne layout, WIP
Parts
186| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | 4492 | DEV_18288:LED_4492 | U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23, U24, U25 +30 |
| 46 | D | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +30 |
| 46 | SW_PUSH | kbd:keyswitch_cherrymx_hotswap_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +30 |
| 8 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R4, R5, R6, R8, R9, R10 |
| 6 | 0.5mm | PCM_SparkFun-Connector:TestPoint-0.5mm | TP1, TP2, TP3, TP13, TP14, TP17 |
| 4 | 0.1uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 4 | 500 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R_LED_DATA_1, R_LED_DATA_2, R_LED_DATA_3, R_LED_DATA_4 |
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | MNT 3, MNT 3, MNT 3, MNT 4 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | MNT 1, MNT 1, MNT 2, MNT 2 |
| 3 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1, J4, J6 |
| 2 | 120 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R7 |
| 2 | Board | PCM_kikit:Board | LEFT, RIGHT |
| 2 | CAHCT1G125QDCKRQ1 | DEV_18288:DCK5 | U2, U29 |
| 2 | ISO1050DUB | Package_SO:SOP-8_6.62x9.15mm_P2.54mm | U26, U28 |
| 2 | ProMicro_r | kbd:ProMicro | U1, U27 |
| 2 | SERIAL_01 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2, J5 |
| 1 | DISPLAY_01 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D47 |
| 1 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
Questions
How big is the Stensgrind pcb PCB?
It measures 351.8 × 100.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Stensgrind pcb use?
186 parts, built around the CAHCT1G125QDCKRQ1 and ISO1050DUB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stensgrind pcb KiCad files?
From the Deltaphish/stensgrind repository on GitHub, at the commit this page was made from: the board is stensgrind_pcb/stensgrind_pcb.kicad_pcb and its schematic stensgrind_pcb/left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stensgrind pcb design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers113.5 × 105.5 mm
Multistepper
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32
243 parts208 - 4 layers127 × 165 mm
ECU
lflaherty/ev-ecu
Custom ECU (firmware and hardware) for Bespoke Electric Vehicles
258 parts13Apache-2.0 - 4 layers260 × 113 mm
- 2 layers100 × 50 mm
- 2 layers127 × 91.5 mm
Accumulator Board
formulaslug/fs-3-schematics
Electrical Design Repository for fs-3 schematics and PCBs
110 parts5 - 4 layers127 × 67.3 mm
- 2 layers89.8 × 55.3 mm
