2 layers142.9 × 114.9 mm
SofleKeyboard
josefadamcik/SofleKeyboard
A split keyboard based on Lily58, Crkbd and Helix keyboards
114 parts2.6k
2 layers284 × 140.8 mm
Atreis
dekonnection/atreis124Based on Keebio's Iris keyboard design files, modified to achieve the same layout in a single-piece form-factor.
- Size
- 284 × 140.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 114
- Nets
- 83
- Pads
- 591
- Tracks, vias
- 542, 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 Jan 2018
- Updated
- 8 Jan 2022
Overview
Atreis is an open-source printed circuit board by dekonnection, from the dekonnection/atreis repository on GitHub, published under the MIT licence. It is a 2-layer board of 284 × 140.8 mm with 114 parts on 83 nets, routed with 542 tracks and 6 vias.
Its parts include 56 diodes, 1 IC and 1 switch. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdAtreis keyboard
Unsplitting the Iris keyboard.
Based on Keebio's Iris keyboard design files, modified to achieve the same layout in a single-piece form-factor.
For more pictures, the full album is on imgur.
Why ?
Because the Iris is perfect, but a splitted keyboard is not the most convenient keyboard to take when on the go.
And because we can.
Why this name ?
Because it looks a lot like the Atreus keyboard, but with the Iris layout.
How do I build one ?
Two solutions:
- like I did when I started the project, laser-cut the plates and hand-wire it.
- use the PCB and case files available in this repository, wonderfully created by https://github.com/climent
Firmware
This keyboard runs under the wonderful QMK firmware, my current (preliminary and pretty basic, but functional) code is here : https://github.com/dekonnection/qmk_firmware/tree/master/keyboards/atreis
I will eventually do a merge request in upstream QMK.
Parts
114| Qty | Value | Footprint | References |
|---|---|---|---|
| 56 | D_Small | atreis:D3_hybrid_common_hole | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +40 |
| 56 | MX-NoLED | kbd:CherryMX_Hotswap | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +40 |
| 1 | Elite-C | Keebio-Parts:Elite-C | U1 |
| 1 | SW_Push | kbd:ResetSW_1side | SW1 |
Similar boards
- 2 layers208.8 × 393.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
114 parts1.3k - 2 layers126.7 × 100.2 mm
- 2 layers305 × 95 mm
- 2 layers200 × 81 mm
- 2 layers195.3 × 90.5 mm
- 2 layers200 × 150 mm
- 2 layers100 × 99.2 mm
Usb serial interface panelized
willemcvu/midi-solenoid-driver
A set of PCBs to drive solenoids using MIDI data, for use in automating musical instruments.
114 parts21MIT
Questions
How big is the Atreis PCB?
It measures 284 × 140.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Atreis use?
114 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Atreis KiCad files?
From the dekonnection/atreis repository on GitHub, at the commit this page was made from: the board is pcb/atreis.kicad_pcb and its schematic pbc-case/pbc-case.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Atreis design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).