2 layers42 × 67 mm
2 layers284.7 × 94.2 mm
SST60HS
dededecline/SST60107- Size
- 284.7 × 94.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 168
- Nets
- 115
- Pads
- 902
- Tracks, vias
- 673, 52
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Jun 2022
- Updated
- 6 Jul 2023
Overview
SST60HS is an open-source printed circuit board by dededecline, from the dededecline/SST60 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 284.7 × 94.2 mm with 168 parts on 115 nets, routed with 673 tracks and 52 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 76 switches, 64 diodes, 17 capacitors, 5 resistors and 3 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
2
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
README
README.mdSST60
Hotswap
Looking for hotswap? See here
Fully open source multi-layout 60% PCB
renders outdated, using the old outline.
Layout support
Features
- RGB Underglow
- RP2040 processor
- MX and Alps compatible
- Indicator light positions for Caps Lock and Esc
- Standard tray mount support
- Gummy O-Ring support (Bakenko, ogre, etc. anything that h60 supports, this does too.)
- USB-C or Unified Daughterboard (or equivalent with the same pinout)
- Overcurrent and ESD protection
- Flex meme cuts
DISCLAIMER
This PCB has been tested and confirmed to work properly. The members of the PCB development team are not liable if you end up with a non-functional pcb. Order at your own risk. Support will not be provided but pull requests will be reviewed and possibly accepted.
Parts
168| Qty | Value | Footprint | References |
|---|---|---|---|
| 67 | MX_SW_HS | marbastlib-mx:SW_MX_HS_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +51 |
| 64 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D17, D18, D19, D20, D21, D22, D23, D24 +48 |
| 10 | .1u | Capacitor_SMD:C_0402_1005Metric | C3, C7, C8, C11, C12, C13, C14, C15, C16, C17 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C10 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R5 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | MX_stab | marbastlib-mx:STAB_MX_P_3u | S62, S64 |
| 2 | MX_stab | marbastlib-mx:STAB_MX_P_2.25u | S44, S45 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Boot | Button_Switch_SMD:SW_SPST_TL3342 | SW68 |
| 1 | MX_stab | marbastlib-mx:STAB_MX_P_2u | S15 |
| 1 | MX_stab | marbastlib-mx:STAB_MX_P_2.75u | S57 |
| 1 | MX_stab | marbastlib-mx:STAB_MX_P_7u | S63 |
| 1 | PCB Outline | Components:L60 Outline | H1 |
| 1 | RP2040 | cipulot_parts:RP2040-QFN-56 | U2 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_TL3342 | SW69 |
| 1 | SM04B | Connector_Molex:Molex_Pico-EZmate_78171-0004_1x04-1MP_P1.20mm_Vertical | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23 | U3 |
Questions
How big is the SST60HS PCB?
It measures 284.7 × 94.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SST60HS use?
168 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SST60HS KiCad files?
From the dededecline/SST60 repository on GitHub, at the commit this page was made from: the board is Hotswap/KiCad/SST60HS.kicad_pcb and its schematic Hotswap/KiCad/SST60HS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SST60HS design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm
- 4 layers102.9 × 96.7 mm
PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm
Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm
- 2 layers44 × 44 mm
