2 layers65 × 56 mm
2 layers95.9 × 55.9 mm
LEDPendant
DecadentOasis/LEDPendant- Size
- 95.9 × 55.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 43
- Pads
- 197
- Tracks, vias
- 265, 40
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 May 2015
- Updated
- 2 Jun 2015
Overview
LEDPendant is an open-source printed circuit board by DecadentOasis, from the DecadentOasis/LEDPendant repository on GitHub. It is a 2-layer board of 95.9 × 55.9 mm with 42 parts on 43 nets, routed with 265 tracks and 40 vias.
It is built around the LD1117S33TR(MS). Its parts include 13 capacitors, 11 resistors, 8 ICs, 3 switches and 3 inductors.
Main components
1README
README.mdLEDPendant
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | APA-102 | CrumpPrints:APA102 | U2, U3, U4, U5, U6, U7 |
| 3 | 10k | Resistors_SMD:R_0805 | R2, R6, R9 |
| 3 | SPST | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1, SW2, SW3 |
| 2 | 10n | Capacitors_SMD:C_0805 | C4, C5 |
| 2 | 10uF | Capacitors_Tantalum_SMD:TantalC_SizeA_EIA-3216_Reflow | C1, C12 |
| 2 | 15pf | Capacitors_SMD:C_0805 | C2, C3 |
| 2 | 22 | Resistors_SMD:R_0805 | R4, R5 |
| 2 | 22k | Resistors_SMD:R_0805 | R7, R10 |
| 2 | 33nf | Capacitors_SMD:C_0805 | C6, C7 |
| 2 | 6.8nh | Resistors_SMD:R_0805 | L1, L2 |
| 1 | 0.1uF | Capacitors_SMD:C_0805 | C13 |
| 1 | 1.0pf | Capacitors_SMD:C_0805 | C11 |
| 1 | 1.2pf | Capacitors_SMD:C_0805 | C10 |
| 1 | 10 | Resistors_SMD:R_0805 | R1 |
| 1 | 100k | Resistors_SMD:R_0805 | R8 |
| 1 | 100nf | Capacitors_SMD:C_0805 | C8 |
| 1 | 1M | Resistors_SMD:R_0805 | R3 |
| 1 | 2.2nf | Capacitors_SMD:C_0805 | C9 |
| 1 | 4.7nh | Resistors_SMD:R_0805 | L3 |
| 1 | 47k | Resistors_SMD:R_0805 | R11 |
| 1 | AB2_USB | ab2_usb:AB2_USB_MICRO_SMD | USB1 |
| 1 | ANTENNA | antennes:Ant_Microchip_2_4G | ANT1 |
| 1 | Crystal | Crystals:Crystal_SMD_0603_4Pads | Y1 |
| 1 | LD1117S33TR | SMD_Packages:SOT-223 | U8 |
| 1 | VAL** | imciner2_Footprints:BATT_CR2032_MPD | BATT_CR2032_MPD |
| 1 | nRF24LU1P | Housings_DFN_QFN:QFN-32-1EP_5x5mm_Pitch0.5mm | U1 |
Questions
How big is the LEDPendant PCB?
It measures 95.9 × 55.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LEDPendant use?
42 parts, built around the LD1117S33TR(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEDPendant KiCad files?
From the DecadentOasis/LEDPendant repository on GitHub, at the commit this page was made from: the board is LEDPendant.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEDPendant design in my own project?
Its repository states no licence, so its author keeps all rights: ask DecadentOasis before reusing the design.
Similar boards
- 2 layers100 × 100 mm
- 2 layers65 × 56 mm
- 2 layers
Robot MGR
rayvburn/diff_drive_mapping_robot
ROS driver for the Raspberry Pi based differential drive robot
95 parts27 - 4 layers111.8 × 80.8 mm
- 4 layers45.5 × 50 mm
Adapter
strfry/LG360VR
This about making the LG 360 VR Goggles usable with a normal DisplayPort outlet.
58 parts19 - 2 layers74.9 × 40.6 mm
Anavi fume extractor
AnaviTechnology/anavi-fume-extractor
Open source WiFi development board for a portable fume extractor with 5V USB-powered fan for absorbing smoke.
34 parts17 - 2 layers74.9 × 40.6 mm
Anavi thermometer
AnaviTechnology/anavi-thermometer
WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules
25 parts17