4 layers70.8 × 70.8 mm
Stm32 f4xx minimal
amrithHN/stm32f4xx_minimal_dev
stm32f4 minimal dev board with few sensors
79 parts4GPL-3.0
4 layers
STM32 Development Board
ddona19/IntegratedLabsProjectDario Dona project for Integrated Labs
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 77
- Pads
- 182
- Tracks, vias
- 295, 66
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Jun 2025
- Updated
- 12 Jun 2025
Overview
STM32 Development Board is an open-source printed circuit board by ddona19, from the ddona19/IntegratedLabsProject repository on GitHub. It is a 4-layer board with 46 parts on 77 nets, routed with 295 tracks and 66 vias.
It is built around the STM32F405RGT6, MAX30101EFD+T and MP2359DJ-LF-Z, with the PCM12SMTR, USBLC6-2SC6 and B5819W among its other parts. Its parts include 16 capacitors, 13 resistors, 5 ICs, 4 diodes and 2 connectors. It belongs with the microcontroller boards boards and the STM32 boards of this library.
Main components
9
STM32F405RGT6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
MAX30101EFD+T
OLGA-14(3.3x5.6)-40℃~+85℃ 1.1mA 1.7V~2V 18bit 4 I2C Integrated ambient light cancellation (ALC)、Built-in temperature sensor OLGA-14(3.3x5.6) Heart Rate Sensors ROHSMaxim Integrated (Analog Devices)Heart Rate Sensors
MP2359DJ-LF-Z
TSOT-23-6-40℃~+85℃@(TA) 1 1.2A 1.4MHz 4.5V~24V 810mV~15V Adjustable Buck Buck Built-in No TSOT-23-6 DC-DC Converters ROHSMonolithic Power SystemsDC-DC Converters
PCM12SMTR
SMD-20℃~+85℃ 6V PC Pin Rectangular Columnar SPDT Surface Mount,Vertical SMD Slide Switches ROHSC&KSlide SwitchesUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
10118193-0001LF
SMD-55℃~+85℃ 1 1.8A 100V 5P Black Female Micro-B Surface Mount, Right Angle USB 2.0 SMD USB Connectors ROHSAmphenolUSB Connectors
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
DC-005
UncategorisedUnknown maker
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C5, C6, C7, C9 |
| 3 | 10u | Capacitor_SMD:C_1206_3216Metric | C8, C14, C15 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric | C11, C13 |
| 2 | 2k2 | Resistor_SMD:R_0402_1005Metric | R2, R6 |
| 2 | 2k2 | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | B5819W | Diode_SMD:D_SOD-123 | D2, D3 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10118193-0001LF | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x11_P3.50mm_Horizontal | J2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 10u | TerminalBlock_RND:TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | L2 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 250mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 270 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 39n | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 47 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 600 @ 600MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | DC-005 | Diode_SMD:D_SMB_Modified | J8 |
| 1 | MAX30101EFD | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_6.7x11.72mm_W6.73mm_P2.54mm_LowProfile_JPin | U4 |
| 1 | MP2359DJ-LF-Z | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | PCM12SMTR | Capacitor_SMD:CP_Elec_CAP-XX_DMF3Zxxxxxxxx3D | U5 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | STM32F405RGT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
Questions
What parts does the STM32 Development Board use?
46 parts, built around the STM32F405RGT6, MAX30101EFD+T, MP2359DJ-LF-Z and PCM12SMTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32 Development Board KiCad files?
From the ddona19/IntegratedLabsProject repository on GitHub, at the commit this page was made from: the board is DarioDona/Lecture Practice/STM32 Development Board/STM32 Development Board.kicad_pcb and its schematic DarioDona/Lecture Practice/STM32 Development Board/STM32 Development Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32 Development Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask ddona19 before reusing the design.
Similar boards
- 4 layers57 × 52 mm
STM32 based project
majdbiw4200/STM32F405RGT-dev-board
STM32 + USB + Buck Converter PCB Design
50 parts3MIT - 4 layers60.7 × 40 mm
STM32F4 REV2
pravinsharma15k-ops/STM32F4-Test-Board
STM32F405-based test board designed in KiCad 10, with buck converter, USB, SWD, I2C and UART.
52 parts1 - 4 layers
STM32 Development Board
fabiokurti/Laburator-i-integruar-final
🧪 STM32F1 Embedded Systems Assignments This repository contains schematic-based embedded system projects using STM32 microcontrollers.
43 parts - 4 layers55.5 × 50.5 mm
STM32 Buck converter
kingMordred/STM32F4_buck_converter_pcb
PCB design using KiCad 10.0 for an STM32F4 with a buck converter, usb connection, USART and I2c communication lines with the microcontroller and an external clock.
53 parts - 4 layers55 × 55 mm
STM32+USB+BUCK
peterg0313210/STM32-USB-BUCK-Breakout-Board
This project includes the schematic and PCB files as well as the necessary Gerber and assembly files for a circuit board with an STM32F405RGT6 processor with some breakout pins for access to a set of the I2C and UART…
50 parts - 4 layers55.8 × 50 mm
- 4 layers
