2 layers150.4 × 99.6 mm
ArduBooster 4x
ddo02/ArduBooster
Throttle pedal booster based on Arduino. To improve throttle response.
108 parts3
2 layers263.3 × 150.4 mm
ArduBooster 4x2
ddo02/ArduBooster3Throttle pedal booster based on Arduino. To improve throttle response.
- Size
- 263.3 × 150.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 216
- Nets
- 45
- Pads
- 920
- Tracks, vias
- 1,680, 0
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Aug 2016
- Updated
- 7 Jan 2018
Overview
ArduBooster 4x2 is an open-source printed circuit board by ddo02, from the ddo02/ArduBooster repository on GitHub. It is a 2-layer board of 263.3 × 150.4 mm with 216 parts on 45 nets, routed with 1,680 tracks and 0 vias.
It is built around the ATMEGA328-PU, ICL7660N and LM358. Its parts include 72 capacitors, 72 resistors, 32 ICs, 16 diodes and 16 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ICL7660N
DIP-83V~9.5V DIP-8 Charge Pumps ROHSHGSEMIDC-DC Converters
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
README
README.mdArduBooster
TODO: Write the readme!
ArduBooster repository.
License
This project is under dual-license.
First license is for commercial use of this project. To build a product, based on this project, and sell it.
Second license is for non-commercial use of this project. To build a sample, to personal use or education use.
Donate
Parts
216| Qty | Value | Footprint | References |
|---|---|---|---|
| 56 | 10k | Discret:R3 | R1, R1, R1, R1, R1, R1, R1, R1, R4, R4, R4, R4, R4, R4, R4, R4 +40 |
| 40 | 1u | ArduBooster_Library:CAP_BIG | C1, C1, C1, C1, C1, C1, C1, C1, C2, C2, C2, C2, C2, C2, C2, C2 +24 |
| 16 | 100n | ArduBooster_Library:CAP_MID | C8, C8, C8, C8, C8, C8, C8, C8, C9, C9, C9, C9, C9, C9, C9, C9 |
| 16 | 1n4007 | ArduBooster_Library:DIODE | D1, D1, D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2, D2, D2 |
| 16 | 22p | ArduBooster_Library:CAP_SMALL | C5, C5, C5, C5, C5, C5, C5, C5, C6, C6, C6, C6, C6, C6, C6, C6 |
| 16 | 470 | Discret:R3 | R2, R2, R2, R2, R2, R2, R2, R2, R3, R3, R3, R3, R3, R3, R3, R3 |
| 8 | 4052 | Sockets_DIP:DIP-16__300 | U3, U3, U3, U3, U3, U3, U3, U3 |
| 8 | ATMEGA328-P | Sockets_DIP:DIP-28__300 | IC1, IC1, IC1, IC1, IC1, IC1, IC1, IC1 |
| 8 | CONTROL | Connect:Wafer_Horizontal15x5.8x7RM2.5-5 | P3, P3, P3, P3, P3, P3, P3, P3 |
| 8 | CRYSTAL | Crystals:Crystal_HC50-U_Vertical | X1, X1, X1, X1, X1, X1, X1, X1 |
| 8 | ICL7660 | Sockets_DIP:DIP-8__300 | U1, U1, U1, U1, U1, U1, U1, U1 |
| 8 | LM358 | Sockets_DIP:DIP-8__300 | U2, U2, U2, U2, U2, U2, U2, U2 |
| 8 | MAIN_CONN | Connectors_Molex:Molex_MiniFit-JR-5569-08A1_2x04x4.20mm_Angled | P4, P4, P4, P4, P4, P4, P4, P4 |
More from ddo02/ArduBooster
2- 2 layers70.1 × 54.6 mm
ArduBooster
ddo02/ArduBooster
Throttle pedal booster based on Arduino. To improve throttle response.
36 parts3
Similar boards
- 2 layers152.4 × 86.4 mm
- 2 layers99.4 × 99.6 mm
GR Subscriber Line Interface Module
GadgetReboot/Phone_SLIM
POTS Telephone Subscriber Line Interface Module
112 parts62CC-BY-SA-4.0 - 2 layers63.5 × 31.8 mm
- 2 layers90 × 55 mm
- 4 layers73 × 32 mm
Im converter
Kononenko-K/Image-To-Scope-Converter
Raster oscilloscope images generator from an arbitrary bitmap file.
56 parts2 - 2 layers81.3 × 101.6 mm
Applied electronics multimeter
Harpur01/applied-electronics-multimeter-pcb
Portfolio project: custom Applied Electronics PCB multimeter using KiCad, ATmega328P, LCD display, Arduino code, and hardware test evidence.
63 parts - 2 layers99.5 × 99.5 mm
Bidirectional Power Converter 24V-12V with BMS
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
156 parts3MIT - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342
Questions
How big is the ArduBooster 4x2 PCB?
It measures 263.3 × 150.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ArduBooster 4x2 use?
216 parts, built around the ATMEGA328-PU, ICL7660N and LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArduBooster 4x2 KiCad files?
From the ddo02/ArduBooster repository on GitHub, at the commit this page was made from: the board is PCB/ArduBooster_4x2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArduBooster 4x2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ddo02 before reusing the design.