
Mini 6 Pin
dcuartielles/semaforos
Proyecto colectivo de realizar semáforos en la mayor cantidad de modos posible.

Proyecto colectivo de realizar semáforos en la mayor cantidad de modos posible.
555 PCB is an open-source printed circuit board by dcuartielles, from the dcuartielles/semaforos repository on GitHub. It is a 2-layer board of 37.2 × 73.4 mm with 14 parts on 10 nets.
It is built around the NE555. Its parts include 5 resistors, 3 diodes, 2 capacitors and 2 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | LED_ALT | Semaforo:LED_D10.0mm | D1, D2, D3 |
| 2 | 470 | Resistor_SMD:R_1206_3216Metric_Pad1.39x1.80mm_HandSolder | R2, R4 |
| 2 | NE555 | Wickerlib:SOIC-8-3.9x4.9MM-P1.27MM | U1, U2 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.39x1.80mm_HandSolder | R1 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.39x1.80mm_HandSolder | C1 |
| 1 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.39x1.80mm_HandSolder | R3 |
| 1 | 47k | Resistor_SMD:R_1206_3216Metric_Pad1.39x1.80mm_HandSolder | R5 |
| 1 | C | Capacitor_SMD:C_1206_3216Metric_Pad1.39x1.80mm_HandSolder | C2 |
| 1 | EdgeTraffic | Semaforo:10mm.All.01 | E1 |
The 13 most common of 14 parts.

dcuartielles/semaforos
Proyecto colectivo de realizar semáforos en la mayor cantidad de modos posible.

dcuartielles/semaforos
Proyecto colectivo de realizar semáforos en la mayor cantidad de modos posible.

dcuartielles/semaforos
Proyecto colectivo de realizar semáforos en la mayor cantidad de modos posible.

dcuartielles/semaforos
Proyecto colectivo de realizar semáforos en la mayor cantidad de modos posible.

dcuartielles/semaforos
Proyecto colectivo de realizar semáforos en la mayor cantidad de modos posible.




leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

DoctorWkt/CSCvon8
A crazy small 8-bit CPU built with only seventeen 7400-series chips.

nicolacimmino/PLC-14500
Retro trainer board based on the MC14500 1-bit ICU. The project is OSHW certified and a ready to assemble kit is available on Tindie.

bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino

kraakenstuff/ADSR
2HP ADSR module based on "Fastest Envelope in the West" by René Schmitz (https://www.schmitzbits.de/adsr.html)
It measures 37.2 × 73.4 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the NE555. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dcuartielles/semaforos repository on GitHub, at the commit this page was made from: the board is ejemplos/KiCad/src/555_PCB/001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dcuartielles before reusing the design.