2 layers101.6 × 154.3 mm
Battlepoint
dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.
37 parts1
2 layers63.5 × 31.8 mm
PressSwitchControlSquare
dcowden/battlepoint1in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.
- Size
- 63.5 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 20
- Pads
- 47
- Tracks, vias
- 113, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Jun 2018
- Updated
- 30 Nov 2025
Overview
PressSwitchControlSquare is an open-source printed circuit board by dcowden, from the dcowden/battlepoint repository on GitHub. It is a 2-layer board of 63.5 × 31.8 mm with 10 parts on 20 nets, routed with 113 tracks and 2 vias.
It is built around the AP2112K-3.3TRG1. Its parts include 5 connectors, 2 capacitors and 2 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdBattlePoint
A real-life capture the flag controller
TODO
Electrical
- Shield cannot extend over UNO USB block
- Owner and Capture LED strands reversed
- More room
- more room for heat sink ( was hitting stuff around it)
- add connx2 for switch
- add 2x 1000uf caps near LED strips
- BUG: vmonitor connects to vin of regulator, not vin of arduino
- BUG: not enough room for terminal block
- Change terminal block footprint to conn JST XH
- BUG: audio: chnage to JSTx05, add ground pin
- Button board: latch has to go inwards
- switch to microusb breakout and USB for lights, and TYPEA USB for each led strand
- merge 620 and 330 ohm (R4 and R5) to 1x 1k instead
Mechanical
- More room between OLED board and Button board ( they overlap now)
- Bigger Channels for lights. Maybe just keep the back partially open
- more room around buttons. they tend to get tangled with wires
- The bezel needs to cover the non-interactive part of the OLED display
Programming
- make # of lights on each strand configurable
- change defaults to 20 lights on each strand
- remove debug
- in cp mode, we have captured the control point shouldnt play, since victory is immediate
- in KOTH, the countdown gets behind the numbers. better to just play the countdown as one recording
- record new sounds
Enhancements
Easier to make and higher mast
The led strips should be in a mast that extends upwards, making it easier to make and better visibilty too
Three Player Mode
Three player mode would require another LED strip and another button. The rules are as follows:
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending. But the winning team is the one which accumulates the most time towards the capture. in CP mode the point tracks all three colors separately
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | AP2112K-3.3TRG1 | AP2112K-3.3TRG1:SOT95P285X140-5N | U2 |
| 1 | Batt_switch | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Battery | Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J1 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_PH_B3B-PH-SM4-TB_1x03-1MP_P2.00mm_Vertical | J5 |
| 1 | ESP32-C3_SUPERMINI_SMD | ESP32-C3_SUPERMINI_SMD:MODULE_ESP32-C3_SUPERMINI | U1 |
| 1 | LED_NEOPIXEL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | QMC5833 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | VSelect | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | VSEL1 |
Questions
How big is the PressSwitchControlSquare PCB?
It measures 63.5 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PressSwitchControlSquare use?
10 parts, built around the AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PressSwitchControlSquare KiCad files?
From the dcowden/battlepoint repository on GitHub, at the commit this page was made from: the board is control_squares/kicad/PressSwitchControlSquare/PressSwitchControlSquare.kicad_pcb and its schematic control_squares/kicad/ControlSquare.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PressSwitchControlSquare design in my own project?
Its repository states no licence, so its author keeps all rights: ask dcowden before reusing the design.
More from dcowden/battlepoint
6- 2 layers89.5 × 116.8 mm
FieldTarget ESP Plus Nano
dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.
26 parts1 - 2 layers81.3 × 81.3 mm
Payload
dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.
12 parts1 - 2 layers
FieldTarget ESP Plus Nano
dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.
12 parts1 - 2 layers70.5 × 54.6 mm
Esp32-board
dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.
9 parts1 - 2 layers25.3 × 30.8 mm
ControlSquare
dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.
4 parts1
Similar boards
- 4 layers16.9 × 119.4 mm
- 6 layers84 × 98 mm
FujiNet-5200-Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
145 parts142 - 2 layers25.4 × 54.5 mm
Rpi pico debugger shoe
ShawnHymel/rpi-pico-debugger-shoe
Stackable debugger board for the Raspberry Pi Pico. Solder long headers to this debugger board in order to connect the Pico to it.
49 parts84 - 4 layers83 × 109 mm
- 2 layers26 × 28 mm
- 2 layers223.5 × 160 mm
- 4 layers30 × 30 mm
- 4 layers100 × 100 mm
V25Panel
maholli/SAM32
Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32
211 parts43