Skip to the content
2 layers60 × 110 mmSpectralist Controls, the printed circuit board in 3D

Spectralist Controls

dchwebb/Spectralist9

Eurorack Additive Synthesizer

Size
60 × 110 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
31
Pads
135
Tracks, vias
181, 24
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
10 Oct 2024
Updated
7 Apr 2025

Overview

Spectralist Controls is an open-source printed circuit board by dchwebb, from the dchwebb/Spectralist repository on GitHub. It is a 2-layer board of 60 × 110 mm with 30 parts on 31 nets, routed with 181 tracks and 24 vias.

It is built around the B10K. Its parts include 16 connectors, 3 diodes and 3 switches. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

Spectralist

Overview

Image

Spectralist is an additive oscillator for Eurorack modular synthesisers. Up to 300 harmonics are output over two separate Odd and Even channels with a 'filter' offering a range of options for sculpting the harmonic spectrum of the output signals.

There are two harmonic modes - individual harmonics and sinusoidal waves of harmonics. In individual harmonic mode the spread controls adjust the spacing of the harmonics and the warp control either progressively bunches up or spreads out the harmonics. In the sinusoidal mode the spread controls increase the frequency of the 'waves' of harmonics.

The filter can be selected as a low pass filter with continuously adjustable slope or as a comb filter with adjustable tooth width and spread. In the comb filter mode the channel filter controls set the width between teeth and the slope sets the rise and fall times of the teeth. The individual channel filters controls can be adjusted with potentiometers or by CV with with trimmers to attenuate.

The pan CV input allows each channel to be smoothly panned between the two outputs. This can be used to mix the signals together in a mono setup, or used to dynamically shift the harmonics in the stereo field.

In the centre of the module is a ring of LEDs that give a visual representation of the harmonic spread and warp settings.

The module was designed in conjunction with musician Tal Shoshani who produced the following demonstration video:

IMAGE ALT TEXT HERE

Technical

Image

The module is based around an STM32H723VGT microcontroller, clocked at 400MHz. A TI PCM5100APW 32 bit audio DAC is used for the two channel outputs.

A TL072 dual op-amps is used to amplify and filter the DAC output (and/or phase invert) the outputs from 3V to 9V peak-to-peak at maximum. Input CV signals are conditioned by MCP6004 op-amps.

A USB B micro port is available at the rear of the unit for software updgrades and configuration via a serial connection.

The animated 25 LED display is driven over I2C by a PCA9956B LED Driver and the SMD LEDs sit on a daughter board raising them to the level of the front panel.

Components schematic

LED daughterboard schematic

Controls schematic

Power

Analog power is supplied via a 3.3V LDO regulator and digital power uses a TPS561201 switching power supply.

  • +12V current draw: 139 mA
  • -12V Current draw: 7 mA

Errata

Panel Errata: Mode switch hole too large for subminiature switch Filter type switch hole just too narrow Harm_Warp_pot and Harm_Stretch_Pot wrong way round (fixed 1.1)

Parts

30
QtyValueFootprintReferences
8B10kCustom_Footprints:Alpha_9mm_Potentiometer_AlignedFilter_A_Cutoff1, Filter_A_Trim1, Filter_B_Cutoff1, Filter_B_Trim1, Filter_Slope_Pot1, Harmonic_Stretch_Pot1, Harmonic_Warp_Pot1, Stretch_Trim1
2Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ15, J16
2Conn_01x10_PinConnector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalJ3, J4
2Conn_01x8_PinConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ1, J2
1B_OctaveCustom_Footprints:SW_PUSH_6mm_alignedSW3
1ChannelAOutCustom_Footprints:THONKICONN_holeJ12
1ChannelBOutCustom_Footprints:THONKICONN_holeJ13
1Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ14
1FilterA_CVCustom_Footprints:THONKICONN_holeJ10
1FilterB_CVCustom_Footprints:THONKICONN_holeJ11
1Filter_A_LEDCustom_Footprints:LED_D3.0mmD1
1Filter_B_LEDCustom_Footprints:LED_D3.0mmD2
1Filter_SwitchCustom_Footprints:SPDT_MiniatureSW2
1Harmonic_SwitchCustom_Footprints:SPDT_SubMiniature_AlignedSW1
1OctLEDCustom_Footprints:LED_D3.0mmD3
1PanCVCustom_Footprints:THONKICONN_holeJ8
1SlopeCVCustom_Footprints:THONKICONN_holeJ9
1StretchCVCustom_Footprints:THONKICONN_holeJ5
1VOctCVCustom_Footprints:THONKICONN_holeJ6
1WarpCVCustom_Footprints:THONKICONN_holeJ7

More from dchwebb/Spectralist

2
  • 2 layers40 × 37 mmSpectralist LEDs, the printed circuit board in 3D

    Spectralist LEDs

    dchwebb/Spectralist

    Eurorack Additive Synthesizer

    34 parts9

Similar boards

  • 2 layers96.5 × 20.3 mmAvalancheVCO, the printed circuit board in 3D

    AvalancheVCO

    kassu/kassutronics

    Projects, documentation... all things synthesizers and electronics

    21 parts183
  • 2 layers99.1 × 109.2 mmModule, the printed circuit board in 3D

    Module

    zlosynth/kaseta

    Saturating tape delay and feedback sculptor.

    71 parts59CC-BY-SA-4.0
  • 2 layers86.4 × 69.9 mmPeaks, the printed circuit board in 3D

    Peaks

    matias-levy/peaks

    A fully-functional low-cost reversion of Mutable instrument's Peaks

    54 parts58
  • 2 layers48.4 × 106.3 mmAchordion, the printed circuit board in 3D

    Achordion

    zlosynth/achordion

    Chord-crafting quantizing wavetable oscillator.

    55 parts38CC-BY-SA-4.0
  • 2 layers9.9 × 110.1 mmADSR, the printed circuit board in 3D

    ADSR

    kraakenstuff/ADSR

    2HP ADSR module based on "Fastest Envelope in the West" by René Schmitz (https://www.schmitzbits.de/adsr.html)

    44 parts37
  • 2 layers181.5 × 128.5 mmAndes 10HP, the printed circuit board in 3D

    Andes 10HP

    niektb/sluisbrinkie-eurorack-published

    Published Modules of the Sluisbrinkie project

    158 parts34
  • 2 layers81.3 × 96.5 mmMidi2cv, the printed circuit board in 3D

    Midi2cv

    tomarus/midi2cv

    Eurorack MIDI2CV and Arpeggiator using an Arduino Nano.

    63 parts31
  • 2 layers85 × 128.5 mmMiniVerb, the printed circuit board in 3D

    MiniVerb

    benjiaomodular/MiniVerb

    A through-hole reverb module for Eurorack based around the Daisy Seed by Electrosmith

    59 parts28MIT

Questions

How big is the Spectralist Controls PCB?

It measures 60 × 110 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Spectralist Controls use?

30 parts, built around the B10K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Spectralist Controls KiCad files?

From the dchwebb/Spectralist repository on GitHub, at the commit this page was made from: the board is Hardware/Spectralist_Controls.kicad_pcb and its schematic Hardware/Spectralist_Components.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Spectralist Controls design in my own project?

Its repository states no licence, so its author keeps all rights: ask dchwebb before reusing the design.