

M-BUS powered ESP32-C3 AMS reader
- Size
- 98 × 121 mm
- Copper layers
- 4
- Thickness
- 1.02 mm
- Parts
- 472
- Nets
- 612
- Pads
- 2,056
- Tracks, vias
- 6,696, 744
- Pours
- 48
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Mar 2023
- Updated
- 22 Jan 2025
Overview
Panel is an open-source printed circuit board by dbeinder, from the dbeinder/han-mosquito repository on GitHub. It is a 4-layer board of 98 × 121 mm with 472 parts on 612 nets, routed with 6,696 tracks and 744 vias.
It is built around the ESP32-C3-MINI-1, TP6841S6 and MSK4005, with the FC-B1010RGBT-HG and MMBT3906T among its other parts. Its parts include 144 resistors, 108 capacitors, 84 diodes, 24 ICs and 24 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
5ESP32-C3-MINI-1
--40℃~+81℃ -89dBm 2.4GHz 350mA 3V~3.6V 82mA ESP32-C3 Chip On-board PCB Antenna UART - WiFi Modules ROHSRF CrazyWiFi ModulesTP6841S6
SOT-23-6-40℃~+125℃ 1 4.5V~40V 800kHz 800mA Adjustable Buck Buck Built-in Yes SOT-23-6 DC-DC Converters ROHSTECH PUBLICDC-DC ConvertersMSK4005
SOD-523-55℃~+125℃ 150uA@40V 490mV@500mA 500mA 50V Independent SOD-523 Schottky Diodes ROHSShikuesSchottky DiodesFC-B1010RGBT-HG
SMD-4P,1x1mm-30℃~+85℃ 0.85mm 1.6V~2.4V 120° 12mcd~35mcd 15mcd~55mcd 1mm 1mm 1mm方形灯头 2.2V~3.2V 2.3V~3.2V 24mW 2mA 2mA 32mW 32mW 3mcd~10mcd 460nm~480nm 520nm~545nm 5mA 610nm~630nm Common Anode Top-mount SMD-4P,1x1mm RGB LEDs ROHSFoshan NationStar OptoelectronicsRGB LEDsMMBT3906T
SOT-5231 PNP 100 100nA 150mW 200mA 250MHz 40V 5V PNP SOT-523 Bipolar (BJT) ROHSCBIBipolar (BJT)
README
README.mdµHAN mosquito
Aus Österreich?: Ich habe noch einige Module übrig, bei Interesse bitte Email an david(at)beinder.at
Inkl. Versand 37€ für 1 Stk, dann +15€ für jedes weitere. Privatverkauf, Bastellösung, keine Gewährleistung, etc ;)
A tiny M-BUS-powered ESP32-C3 board to capture data from digital electricity meters. Compatible with AMS reader firmware.
- Power & flashing via USB-C
- Power & meter signal via M-BUS (RJ11)
- Input current limited to 40mA, this is probably only compatible with Kaifa meters
- Firmware needs no aggressive WiFi power management, there is enough for AP mode and OTA firmware upgrade
- ESP32-C3-MINI-1 module: 160MHz RISC-V core, 4MB Flash, 400kB RAM, 2.4GHz WiFi
- 1mm² RGB LED
- Two side-mounted buttons
- Top: ESP32 reset
- Bottom: AP mode, hold during reset to flash
- Mounted by magnet on the IR port
- Tested on an Austrian (Vbg) Kaifa MA309M
- Designed in KiCad 7
License: free to use and modify for non-commercial use

Prototype pictures
![]() | ![]() |
|---|---|
![]() |
Parts
472| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | MSK4005 | mosquito:D_SOD-523 | D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D3, D3, D3, D3 +32 |
| 36 | 100n | Capacitor_SMD:C_0402_1005Metric | C6, C6, C6, C6, C6, C6, C6, C6, C6, C6, C6, C6, C7, C7, C7, C7 +20 |
| 36 | 1M | Resistor_SMD:R_0402_1005Metric | R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R7, R7, R7, R7 +20 |
| 24 | 10u | Capacitor_SMD:C_0603_1608Metric | C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C3, C3, C3, C3 +8 |
| 24 | 200k | Resistor_SMD:R_0402_1005Metric | R9, R9, R9, R9, R12, R12, R12, R12, R12, R12, R12, R12, R12, R12, R12, R12 +8 |
| 24 | 22u | Capacitor_SMD:C_0603_1608Metric | C4, C4, C4, C4, C4, C4, C4, C4, C4, C4, C4, C4, C5, C5, C5, C5 +8 |
| 24 | 5.1k | Resistor_SMD:R_0402_1005Metric | R10, R10, R10, R10, R10, R10, R10, R10, R10, R10, R10, R10, R11, R11, R11, R11 +8 |
| 24 | SW_Push | mosquito:GT-TC018A | SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW2, SW2, SW2, SW2 +8 |
| 12 | AL5809-40S1-7 | mosquito:D_SOD-123 | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 |
| 12 | 150u | Capacitor_THT:C_Radial_D6.3mm_H7.0mm_P2.50mm | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 |
| 12 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R6, R6, R6, R6, R6, R6, R6, R6, R6, R6, R6 |
| 12 | 2.2k | Resistor_SMD:R_0402_1005Metric | R5, R5, R5, R5, R5, R5, R5, R5, R5, R5, R5, R5 |
| 12 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C8, C8, C8, C8, C8, C8, C8, C8, C8, C8, C8, C8 |
| 12 | 24k | Resistor_SMD:R_0402_1005Metric | R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2 |
| 12 | 330R | Resistor_SMD:R_0402_1005Metric | R4, R4, R4, R4, R4, R4, R4, R4, R4, R4, R4, R4 |
| 12 | 6.8uH | mosquito:CKST252012 | L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1 |
| 12 | 6V8 | mosquito:D_SOD-523 | D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6 |
| 12 | 75k | Resistor_SMD:R_0402_1005Metric | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 |
| 12 | ESP32-C3-MINI-1 | Espressif:ESP32-C3-MINI-1 | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 |
| 12 | FC-B1010RGBT-HG | mosquito:LED_0404 | D7, D7, D7, D7, D7, D7, D7, D7, D7, D7, D7, D7 |
| 12 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3 |
| 12 | MMBT3906T | mosquito:SOT-523 | Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1 |
| 12 | RJ12 | mosquito:EVERCOM-5303-6P6C | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 |
| 12 | RX | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1 |
| 12 | TP6841S6 | Package_TO_SOT_SMD:SOT-23-6 | U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2 |
| 12 | TX | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2 |
| 12 | USB_C_Receptacle_USB2.0 | mosquito:TYPE-C-31-M-19 | J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2 |
The 468 most common of 472 parts.
More from dbeinder/han-mosquito
1- 4 layers19.5 × 31 mm

Similar boards
- 8 layers90.2 × 101.1 mm

RevC fm
Sierra-Lobo/mainboard-hardware
PyCubed mainboard v5 fork by Sierra Lobo for Foras Promineo CubeSat
644 parts1 - 4 layers90.2 × 101.1 mm

- 2 layers46 × 46 mm

Mbadge25
Makerville/makerville-badge
Makerville Badge is a simple PCB with a OLED and a ESP32C3
63 parts6CERN-OHL-P-2.0 - 2 layers60 × 63 mm

- 4 layers38 × 38 mm

CLN17-V1.0
creapunk/CLN-ClosedLoopNemaDriver
Compact closed-loop stepper motor driver designed for NEMA motors
91 parts1.1k - 2 layers74.6 × 73.2 mm

Panelized-2layer
openconcepts-ar/accel2d
This project aims to provide a graphics server system based on hardware accelerated graphics, and a easy way to develop the graphics primitives.
241 parts1 - 4 layers84.9 × 89.9 mm

- 2 layers30 × 50 mm

Chronos polaris hardware
Anish-Agarwall/Polaris-Flight-Computer
A flight computer designed during my freshman year in university for my Rocketry Organization
61 parts
Questions
How big is the Panel PCB?
It measures 98 × 121 mm and has 4 copper layers, 1.02 mm thick.
What parts does the Panel use?
472 parts, built around the ESP32-C3-MINI-1, TP6841S6, MSK4005 and FC-B1010RGBT-HG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the dbeinder/han-mosquito repository on GitHub, at the commit this page was made from: the board is panel/panel.kicad_pcb and its schematic mosquito-c3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask dbeinder before reusing the design.


