4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0
2 layers37.4 × 30.1 mm
Mcp3208
dazemc/mcp3208KiCad mcp3208 x2 ADC expansion board with one GPIO using inverter on CS
- Size
- 37.4 × 30.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 24
- Pads
- 90
- Tracks, vias
- 249, 32
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 26 Oct 2026
- Updated
- 26 Oct 2026
Overview
Mcp3208 is an open-source printed circuit board by dazemc, from the dazemc/mcp3208 repository on GitHub. It is a 2-layer board of 37.4 × 30.1 mm with 15 parts on 24 nets, routed with 249 tracks and 32 vias.
It is built around the MCP3208-BI/P and 74LVC1G04Z. Its parts include 6 capacitors, 3 ICs and 3 connectors.
Main components
2
MCP3208-BI/P
PDIP-16-40℃~+85℃ 0.5LSB 100kHz 12 1LSB 1MHz、2MHz 2.7V~5.5V 500nA 8 External External Multiplexers、Bipolar input Not supported SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)
74LVC1G04Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 1.7V~2V 200uA 32mA 32mA 5ns@5V,50pF 700mV~800mV 74LVC SOT-553 Inverters ROHSDiodes IncorporatedInverters
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5 |
| 2 | Conn_02x08_Odd_Even | Connector_JST:JST_PHD_B16B-PHDSS_2x08_P2.00mm_Vertical | J1, J2 |
| 2 | MCP3208 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1, U2 |
| 1 | 4.3uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 74LVC1G04 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U3 |
| 1 | Conn_01x06 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J3 |
The 12 most common of 15 parts.
Questions
How big is the Mcp3208 PCB?
It measures 37.4 × 30.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mcp3208 use?
15 parts, built around the MCP3208-BI/P and 74LVC1G04Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mcp3208 KiCad files?
From the dazemc/mcp3208 repository on GitHub, at the commit this page was made from: the board is mcp3208/mcp3208.kicad_pcb and its schematic mcp3208/mcp3208.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mcp3208 design in my own project?
Its repository states no licence, so its author keeps all rights: ask dazemc before reusing the design.
Similar boards
- 4 layers83.1 × 92.5 mm
- 2 layers101.6 × 137.4 mm
- 2 layers97 × 79.5 mm
MBRadioDual2
LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios
104 parts35Unlicense - 4 layers88.9 × 20.3 mm
- 2 layers25.4 × 78.2 mm
Sd board
w0ts/optimist
Optimist: an open, modular firmware platform for the M-VAVE FM-1 (from SLOOP / Felucca)
28 parts32GPL-3.0 - 4 layers30 × 53.5 mm
Speak to Me
wntrblm/Speak_to_Me
A beautiful stereo headphone amplifier and a delightfully lo-fi speaker
54 parts20 - 4 layers178 × 99 mm
FreeDSP OCTAVIA
freeDSP/freeDSP-OCTAVIA
8ch Output ADAU1452/1466 DSP Board with Analog/COAX/OPT/USB/Raspberry-Pi Input
529 parts19CC-BY-SA-4.0