

Bedsyino
The hardware part of the BeDSy platform.
- Size
- 100 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 71
- Pads
- 258
- Tracks, vias
- 734, 181
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Oct 2023
- Updated
- 13 Feb 2024
Overview
Bedsyino is an open-source printed circuit board by davorvr, from the davorvr/bedsyino repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 55 mm with 64 parts on 71 nets, routed with 734 tracks and 181 vias.
It is built around the CD74HCT241M96, TEENSY 4.1 and TC4427AVOA. Its parts include 11 connectors, 10 resistors, 6 capacitors and 6 ICs. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3CD74HCT241M96
SOIC-20-300mil-55℃~+125℃ 160uA 2 25ns@4.5V,50pF 4 4.5V~5.5V 6mA 6mA CD4HCT TTL-compatible CMOS Tri-State Unidirectional SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversTEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorisedTC4427AVOA
SOIC-8-40℃~+125℃ 1.5A 1.5A 2 25ns 25ns 4.5V~18V MOSFET SOIC-8 Gate Drivers ROHSMicrochip TechnologyGate Drivers
README
README.mdBeDSyino
What is it?
The BeDSy (Behaviour-recording Device Synchroniser) is a platform for hardware triggering and synchronisation of equipment for laboratory animal behavioural monitoring. For more information about the BeDSy platform, check the BeDSy repository.
The platform consists of two components: the BeDSy Python package, which interfaces with the BeDSyino, a hardware platform which sends custom trigger signals to animal behaviour-monitoring devices.
The BeDSyino is based on the Teensy 4.0 platform (with plans to migrate to the Teensy 4.1) and Teensyduino.
Current state
The BeDSyino is still cooking. While the code is mostly complete, only a single hand-soldered, protoboard-based prototype has been developed thus far. A modular, extensible hardware platform is currently in the works and hardware files will be uploaded as soon as it's ready. The .ino file contains a lot of (hopefully) helpful comments, but more work on the documentation is necessary.
TO DO - expand
License
The code is distributed under GPLv3.
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 8 | Conn_01x02_Pin | Molex_KK-254_AE-7395-02_1x02_P2.54mm_Horizontal | J4, J5, J6, J7, J8, J9, J10, J11 |
| 5 | 0.1uF | C_0805_2012Metric | C2, C3, C4, C5, C6 |
| 4 | TC4427AVOA | SOIC8-N_MC_MCH | U3, U4, U5, U6 |
| 2 | Conn_01x24_Pin | PinHeader_1x24_P2.54mm_Vertical | J2, J3 |
| 1 | 10uF | C_1206_3216Metric | C1 |
| 1 | Barrel_Jack | BarrelJack_Horizontal | J1 |
| 1 | CD74HCT241M96 | SOIC-20W_7.5x12.8mm_P1.27mm | U2 |
| 1 | F1.0 P1 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | F1.1 P0 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | F1.2 P24 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | F1.3 P25 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP6 |
| 1 | F1.3 P7 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP4 |
| 1 | F1.3 P8 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP5 |
| 1 | F2.0 P33 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP8 |
| 1 | F2.0 P4 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP7 |
| 1 | F2.1 P5 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP9 |
| 1 | F2.2 P6 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP10 |
| 1 | F2.2 P9 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP11 |
| 1 | F2.3 P36 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP12 |
| 1 | F2.3 P37 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP13 |
| 1 | F3.1 P28 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP14 |
| 1 | F3.1 P29 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP15 |
| 1 | F4.0 P22 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP16 |
| 1 | F4.1 P23 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP17 |
| 1 | F4.2 P2 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP18 |
| 1 | F4.2 P3 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP19 |
| 1 | PWR SELECT | SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP28 |
| 1 | Q1.0 P10 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP20 |
| 1 | Q1.1 P12 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP21 |
| 1 | Q1.2 P11 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP22 |
| 1 | Q2.0 P13 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP23 |
| 1 | Q3.0 P19 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP24 |
| 1 | Q3.1 P18 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP25 |
| 1 | Q3.2 P14 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP26 |
| 1 | Q3.3 P15 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP27 |
| 1 | Teensy4.1 | Teensy41 | U1 |
The 61 most common of 64 parts.
Similar boards
- 2 layers43.4 × 15.5 mm

- 2 layers118.1 × 101.6 mm

Teensy eurorack
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels
102 parts259MIT - 2 layers240 × 240 mm

- 2 layers304.8 × 170.8 mm

- 2 layers66.5 × 36.5 mm

- 2 layers312 × 140 mm

- 2 layers316 × 119 mm

Teensy Grovebox
jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1
142 parts150MIT - 2 layers304.8 × 95.2 mm

LMN
FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project
106 parts106CC-BY-SA-4.0
Questions
How big is the Bedsyino PCB?
It measures 100 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bedsyino use?
64 parts, built around the CD74HCT241M96, TEENSY 4.1 and TC4427AVOA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bedsyino KiCad files?
From the davorvr/bedsyino repository on GitHub, at the commit this page was made from: the board is hardware/bedsyino.kicad_pcb and its schematic hardware/bedsyino.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bedsyino design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).