Skip to the content
2 layers53.3 × 58.4 mmRCSMCtrl, the printed circuit board in 3D

Model railroad switch machine controller.

Size
53.3 × 58.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
33
Pads
114
Tracks, vias
245, 8
Routed
Yes
KiCad
KiCad 4
Created
12 Nov 2015
Updated
17 Dec 2020

Overview

RCSMCtrl is an open-source printed circuit board by DavidMFlynn, from the DavidMFlynn/SM_Ctrl_RC_Servo repository on GitHub. It is a 2-layer board of 53.3 × 58.4 mm with 38 parts on 33 nets, routed with 245 tracks and 8 vias.

It is built around the LM7805CT. Its parts include 13 resistors, 8 diodes, 4 capacitors, 4 switches and 3 transistors. It belongs with the PIC boards of this library.

Main components

1

README

README.md

SM_Ctrl_RC_Servo

Model railroad switch machine controller. Uses a small (SG90) R/C Servo as a switch machine. Built for the Highland Pacific, 854 East Broadway, San Gabriel, CA 91776, USA GPL 3+ If you find it useful let me know dflynn at oxfordvue.com The G2R Rev B may be the final version. A remote config connector and a big capacitor were added. My faverite servo is the hobbyking HX5010 it's inexpensive and well behaved.

Parts

38
QtyValueFootprintReferences
13RResistors_SMD:R_0805_HandSolderingR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13
6DDiodes_SMD:Diode-SMA_HandsolderingD1, D2, D3, D4, D7, D8
3.1uFCapacitors_SMD:C_0805_HandSolderingC1, C3, C4
2LEDLEDs:LED-1206D5, D6
2MountingHole_3-5mmMounting_Holes:MountingHole_3-5mmH1, H2
2Q_NPN_EBCHousings_TO-92:TO-92_Inline_Narrow_OvalQ1, Q3
2RELAY_2RTRelay:Relay_AXICOM_D2nK1, K2
2SW_PUSHButtons_Switches_SMD:SW_SPST_PTS645SW1, SW2
1CONN_01X03Pin_Headers:Pin_Header_Straight_1x03P2
1CONN_01X15Wires:Wires_AWG20x15P1
1CP1_SmallCapacitors_Elko_ThroughHole:Elko_vert_11.2x6.3mm_RM2.5_CopperClearC2
1LM7805CTPower_Integrations:TO-220U1
1PIC12(L)F1822-I/PHousings_DIP:DIP-8_W7.62mmIC1
1Q_PNP_EBCHousings_TO-92:TO-92_Inline_Narrow_OvalQ2

More from DavidMFlynn/SM_Ctrl_RC_Servo

3
  • 2 layers53.3 × 58.4 mmRCSMCtrl, the printed circuit board in 3D

    RCSMCtrl

    DavidMFlynn/SM_Ctrl_RC_Servo

    Model railroad switch machine controller.

    41 parts2
  • 2 layers53.3 × 58.4 mmRCSMCtrl, the printed circuit board in 3D

    RCSMCtrl

    DavidMFlynn/SM_Ctrl_RC_Servo

    Model railroad switch machine controller.

    38 parts2
  • 2 layers58.4 × 47 mmRCSMCtrl, the printed circuit board in 3D

    RCSMCtrl

    DavidMFlynn/SM_Ctrl_RC_Servo

    Model railroad switch machine controller.

    38 parts2

Similar boards

  • 2 layers173 × 85 mmAudio board, the printed circuit board in 3D

    Audio board

    EleonoreMizo/pedalevite

    Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.

    268 parts101WTFPL
  • 2 layers169.3 × 128 mmPSU PCB, the printed circuit board in 3D

    PSU PCB

    ThomasVDD/SmartSupply

    SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.

    134 parts96
  • 2 layersT41-Main+RF board V012, the printed circuit board in 3D

    T41-Main+RF board V012

    DRWJSCHMIDT/T41

    This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

    255 parts66
  • 4 layers97.6 × 145.1 mmAnalog and ad9958, the printed circuit board in 3D

    Analog and ad9958

    balmerdx/BalmerDX_VNA

    Vector Network Analyzer 10 KHz - 180 MHz

    226 parts26BSD-2-Clause
  • 2 layers68 × 89 mmParanoiaBox, the printed circuit board in 3D

    ParanoiaBox

    profdc9/ParanoiaBox

    A standalone elliptic curve/AES file encryption and decryption device

    60 parts17
  • 2 layers100 × 49.7 mmNano PB, the printed circuit board in 3D

    Nano PB

    AntonioMR/Nano-Play-Board

    Placa para experimentar con el Arduino Nano

    142 parts12
  • 4 layers100 × 100 mmT41, the printed circuit board in 3D

    T41

    ai6ym/t41

    T41-EP SDT Files

    234 parts10

Questions

How big is the RCSMCtrl PCB?

It measures 53.3 × 58.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RCSMCtrl use?

38 parts, built around the LM7805CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RCSMCtrl KiCad files?

From the DavidMFlynn/SM_Ctrl_RC_Servo repository on GitHub, at the commit this page was made from: the board is PCB/RCSMCtrl.kicad_pcb and its schematic PCB G2R Rev B/RCSMCtrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RCSMCtrl design in my own project?

Its repository states no licence, so its author keeps all rights: ask DavidMFlynn before reusing the design.