

RCSMCtrl
Model railroad switch machine controller.
- Size
- 53.3 × 58.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 32
- Pads
- 118
- Tracks, vias
- 242, 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 12 Nov 2015
- Updated
- 17 Dec 2020
Overview
RCSMCtrl is an open-source printed circuit board by DavidMFlynn, from the DavidMFlynn/SM_Ctrl_RC_Servo repository on GitHub. It is a 2-layer board of 53.3 × 58.4 mm with 38 parts on 32 nets, routed with 242 tracks and 11 vias.
It is built around the PIC12F1822-I/P and LM7805CT. Its parts include 13 resistors, 8 diodes, 4 capacitors, 4 switches and 3 transistors. It belongs with the PIC boards of this library.
Main components
2PIC12F1822-I/P
DIP-8-40℃~+85℃ 1.8V~5.5V 10bit 128Byte 256Byte 3.5KB 32MHz 5bit 6 8 Bit Built-in FLASH PIC DIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LM7805CT
TO-2200℃~+70℃@(Ta) 1 1A 20V 2V@(1A) 40uV 5V 62dB@(120Hz) 8mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdSM_Ctrl_RC_Servo
Model railroad switch machine controller. Uses a small (SG90) R/C Servo as a switch machine. Built for the Highland Pacific, 854 East Broadway, San Gabriel, CA 91776, USA GPL 3+ If you find it useful let me know dflynn at oxfordvue.com The G2R Rev B may be the final version. A remote config connector and a big capacitor were added. My faverite servo is the hobbyking HX5010 it's inexpensive and well behaved.
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 47K | Resistors_SMD:R_0805_HandSoldering | R1, R5, R6, R7, R9, R12 |
| 5 | 1K | Resistors_SMD:R_0805_HandSoldering | R2, R3, R8, R10, R13 |
| 4 | D | Diodes_SMD:Diode-SMA_Handsoldering | D1, D2, D3, D4 |
| 3 | .1uF | Capacitors_SMD:C_0805_HandSoldering | C1, C3, C4 |
| 2 | 2N7000 | Housings_TO-92:TO-92_Inline_Narrow_Oval | Q1, Q3 |
| 2 | IM00 | Relays_THT:Relay_DPDT_Panasonic_JW2 | K1, K2 |
| 2 | LED | LEDs:LED-1206 | D5, D6 |
| 2 | MountingHole_3-5mm | Mounting_Holes:MountingHole_3-5mm | H1, H2 |
| 2 | SMA | Diodes_SMD:Diode-SMA_Handsoldering | D7, D8 |
| 2 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1, SW2 |
| 1 | 10K | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 220R | Resistors_SMD:R_0805_HandSoldering | R11 |
| 1 | 2N3906 | Housings_TO-92:TO-92_Inline_Narrow_Oval | Q2 |
| 1 | 33uF | Capacitors_Elko_ThroughHole:Elko_vert_11.2x6.3mm_RM2.5_CopperClear | C2 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P2 |
| 1 | CONN_01X15 | Wires:Wires_AWG20x15 | P1 |
| 1 | LM7805CT | TO_SOT_Packages_SMD:TO-252-2 | U1 |
| 1 | PIC12F1822-I/P | Housings_DIP:DIP-8_W7.62mm | IC1 |
More from DavidMFlynn/SM_Ctrl_RC_Servo
3Similar boards
- 2 layers60.3 × 14.6 mm

- 2 layers173 × 85 mm

Audio board
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
268 parts101WTFPL - 2 layers169.3 × 128 mm

PSU PCB
ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.
134 parts96 - 2 layers

T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 4 layers97.6 × 145.1 mm

Analog and ad9958
balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz
226 parts26BSD-2-Clause - 4 layers100 × 100 mm

- 2 layers68 × 89 mm

ParanoiaBox
profdc9/ParanoiaBox
A standalone elliptic curve/AES file encryption and decryption device
60 parts17 - 2 layers100 × 49.7 mm

Questions
How big is the RCSMCtrl PCB?
It measures 53.3 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RCSMCtrl use?
38 parts, built around the PIC12F1822-I/P and LM7805CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RCSMCtrl KiCad files?
From the DavidMFlynn/SM_Ctrl_RC_Servo repository on GitHub, at the commit this page was made from: the board is PCB G2R/RCSMCtrl.kicad_pcb and its schematic PCB G2R Rev B/RCSMCtrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RCSMCtrl design in my own project?
Its repository states no licence, so its author keeps all rights: ask DavidMFlynn before reusing the design.

