2 layers165.1 × 101.6 mm
2 layers133.4 × 69.9 mm
MedidoPumpESP32
davidmcq137/MedidoPCBPCB for Medido Pump
- Size
- 133.4 × 69.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 56
- Pads
- 223
- Tracks, vias
- 650, 45
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Mar 2020
- Updated
- 29 Apr 2024
Overview
MedidoPumpESP32 is an open-source printed circuit board by davidmcq137, from the davidmcq137/MedidoPCB repository on GitHub. It is a 2-layer board of 133.4 × 69.9 mm with 57 parts on 56 nets, routed with 650 tracks and 45 vias.
It is built around the IFX9201SG. Its parts include 21 resistors, 12 capacitors, 8 ICs, 8 connectors and 3 switches. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdMedidoPCB
PCB for Medido Pump
This is a printed circuit board for the controller for the Medido Pump.
License: Open Source Hardware
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_SMD:R_0805_2012Metric | R3, R5, R6, R9, R13, R14, R17, R19 |
| 4 | 0.1 uF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C10, C11 |
| 3 | 150 uF | Capacitor_SMD:C_Elec_10x10.2 | C2, C4, C9 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R4, R11, R12 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C3 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22K | Resistor_SMD:R_0805_2012Metric | R7, R20 |
| 2 | 2K2 | Resistor_SMD:R_0805_2012Metric | R15, R16 |
| 2 | MultiplexConn | MedidoFootprints:MultiplexConn | J1, J3 |
| 1 | 1 nF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 10 uF | Capacitor_SMD:C_Elec_10x10.2 | C5 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-126-3_Vertical | Q2 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 33K | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | 3K3 | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | 4.7 nF | Capacitor_SMD:C_0805_2012Metric | C12 |
| 1 | 40106 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | 6K8 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | ADS_1015 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U5 |
| 1 | Flow_Sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J24 |
| 1 | Fwd/Off/Rev | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J20 |
| 1 | Hall Sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J21 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J26 |
| 1 | IFX9201 | MedidoFootprints:CONV_IFX9201SGAUMA1 | U3 |
| 1 | Input Protection | Diode_THT:D_5W_P12.70mm_Horizontal | D1 |
| 1 | JPF | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | MCP23008-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U7 |
| 1 | MPRL Pressure | MedidoFootprints:HoneywellMPRL | U8 |
| 1 | On/Off | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | Power | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | Press_Sens | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J23 |
| 1 | Pressure Limit | Rotary_Encoder:RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Sxxxx | SW3 |
| 1 | PwrButton | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J25 |
| 1 | Q_PMOS_GDS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | SEEED Xiao ESP32 C3 | Aviator:SeeedS3 | U2 |
| 1 | SSD1305 OLED | MedidoFootprints:SSD1305_OLED | U6 |
| 1 | SW_DPST | MedidoFootprints:SmallSlider | SW1 |
More from davidmcq137/MedidoPCB
5- 2 layers81.3 × 43.2 mm
- 2 layers68.6 × 22.9 mm
- 2 layers22.2 × 34.9 mm
- 2 layers29.2 × 76.2 mm
Similar boards
- 2 layers29.8 × 64.8 mm
Motor Shield
Rob-Orb/Cards
In Eeschema : You should find the library in the folder kicad-symbols. Link this library to kicad.
30 partsGPL-3.0 - 2 layers59.2 × 52.9 mm
- 2 layers100 × 70.3 mm
- 2 layers165.1 × 120.7 mm
- 2 layers
- 2 layers121.1 × 104.7 mm
Sepia officinalis
tapioki/cephalopoda
Low profile split ergonomic mechanical keyboards
57 parts240GPL-3.0 - 2 layers100 × 96.5 mm
Keyboard ch32x-36-lhs
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware
57 parts236 - 2 layers178 × 39 mm
AddOnA
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
57 parts226CC-BY-SA-4.0
Questions
How big is the MedidoPumpESP32 PCB?
It measures 133.4 × 69.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MedidoPumpESP32 use?
57 parts, built around the IFX9201SG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MedidoPumpESP32 KiCad files?
From the davidmcq137/MedidoPCB repository on GitHub, at the commit this page was made from: the board is MedidoPumpESP32.kicad_pcb and its schematic MedidoPumpESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MedidoPumpESP32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask davidmcq137 before reusing the design.